Aolbea 1440P HD Polica Body Camera Build-in 64GB,Body-Worn Camera User manual
- Category
- Video surveillance kits
- Type
- User manual
This manual is also suitable for
Aolbea 1440P HD Polica Body Camera Build-in 64GB,Body-Worn Camera is a useful tool for law enforcement that features a wide range of capabilities. With its 1440P HD camera, it can record clear and detailed videos even in low-light conditions thanks to the infrared night vision function and white light. Furthermore, the device can also take photos and record audio, making it a versatile tool for documentation. The body camera is equipped with a variety of sensors, including a photosensitive sensor, microphone, and speaker, allowing it to capture a comprehensive record of events.
Aolbea 1440P HD Polica Body Camera Build-in 64GB,Body-Worn Camera is a useful tool for law enforcement that features a wide range of capabilities. With its 1440P HD camera, it can record clear and detailed videos even in low-light conditions thanks to the infrared night vision function and white light. Furthermore, the device can also take photos and record audio, making it a versatile tool for documentation. The body camera is equipped with a variety of sensors, including a photosensitive sensor, microphone, and speaker, allowing it to capture a comprehensive record of events.
AOLBEA
Model: P100
Body Worn Camera
User Manual
- 1 -
Foreword>>
Introduction>>
Thank you for purchasing this P100 police body worn camera made by JWKG Co., Ltd.
N
This instruction manual contains information on how to operate your dashcam.
N
Before using your body camera, we recommend that you read through this manual to ensure
correct usage.
N
To improve the performance of the product, the contents of this manual are subject to change
without prior notice.
N
AOLBEA does not warrant that this document is error-free.
N
AOLBEA assumes no liability for any loss or damageincurred directly or indirectly from internal
data loss caused by incorrect operation of software and hardware, self-disassembly of the product,
or other accidents.
̛
Any problem,Feel free to tell us: jwdkg@outlook.com.
This product is mainly aimed at the special needs of law enforcement departments, research and
development of a new generation of all-weather body camera equipment. This product can record
the dynamic and static audio and video on the law enforcement scene. The special design of infrared
night vision function and white light ensures the effect of law enforcement recorder in full screen at
night.Therefore, it will be a helpful and useful tool for law-enforcing to realize informatization and
standardization.
- 2 -
For Safety >>
What's in the box>>
1*P100 Video Camera
1*USB Connecting Cable
1*Back Clip
1*Shoulder Clip
1*USER Manual
Please read the following Concise Rules. If you disobey these rules may result in danger or
violation of the law. Please carefully read the whole User Manual to get safety tips.
1. Do not disassemble, repair, or modify the product yourself. Doing so may cause fire, electric
shock, or malfunction. For internal inspection and repair, contact the service center
2. Do not use a damaged or modified power cord. Only use the cords provided by the
manufacturer.
3. After long-term work, the machine may heat up ,which is not a malfunction.
?
Customer Service>>
1. Warranty
We provide customers with a warranty of 12 MONTHS from the date of purchase.
2. Support
For any inquires with Aolbea products, please feel free to contact us, we will
respond within 24 hours.
E-mail: [email protected]
Or find us through "Account service" → "Order Information" → "Contact Seller"
- 3 -
Body-Worn Camera Overview>>
FRONT Back Left Right
Top
1
8
10
9
13
22 23
14
21
24
18
19
20
15
16
17
11 12
2
3
4
5
6
7
1. Photosensitive
2. HD Camera
3. Microphone
4. Flashlight
5. Speaker
6. Laser Point
7. LED illumination Light
8. Belt Clip
9. Screen
10. Menu/Back Button
11. Left/Up Button
12. Right/Down Button
13. OK/Preview Button
14. Walkie-Talkie(optional)
15. Flashlight/IR CUT Button
16. Laser/Alarm Button
17. Reset Button
18. Video Recording
/Snapshots/One-key Video
Recording Button
19. Photo Button
20. USB interfere Port
21. Power Button
22. Status Indicator Light
23. Recording Indicator Light
24. Audio Recording
/Lock Video files Button
- 4 -
Quick Start Operation>>
• Fully charge your camera before the first operation with the provided power cord.
• To protect your safety and avoid damage to the machine,please use the original power
adaptor for charging only
Charge Camera
Lift up the USB cover and plug the
power cord into the camera's USB jack.
Camera status LED shows solid BLUE
while charging and automatically turns
off when fully charged.
IMPORTANT
:
Power On/Off
Long press for 1 second to turn
the camera on. Camera vibrates, emits
a tone and the Camera Status LED
remains on GREEN.
Power On
- 5 -
Record Video
Long press for 3 seconds to turn off the camera. Camera vibrates, emits a tone and the Camera
Status LED turns Off.
Short press to start recording.
Camera vibrates and emits a tone.
While the device is recording,
Camera Record LED slow flashes
RED.
Power off
Start Recording
When the camera is powered on, press to turn the screen off. To turn it back on, simply press
again.
You can turn off the screen while the camera is still working to save power.
Screen On/Off
1.While the camera is recording, short press the Record Button . The camera stops recording,
vibrates and emits a tone. Camera Record LED goes off
Stop Recording
- 6 -
Press and hold the Button while the camera is off. The camera will vibrate to confirm the action
and automatically turn on and start video recording.
While recording video you can tag an important file by pressing the . A yellow exclamation
mark will appear at the top right of the screen. When you view the file in the media play back
menu the file will be tagged with .
In Standby Mode and Recording Mode, short press or long press , and the unit will take a
picture.
Quick Video Recording
Tagging important files
Photograph Feature
- 7 -
In Standby Mode, short press to record a audio file, press again
to stop recording.Camera Record LED slow flashes Yellow.
When the device is powered on,press to enter file.Press / to
select the files(video file,audio file or photo file),press to enter the
files.
During playback, you can:
● While viewing video or audio,press / to adjust the
volume,press to play or pause the file.
● While viewing photos, press / to display the previous/next
photo.
● Press return to the list.
Press button to exit.
When the device is powered on, press and hold / to zoom
in/out.
Audio Recording
Preview & Playback
Zoom in/out
- 8 -
When silent mode is enabled, all LEDs and tones are turned Off. Vibration is the only source of
notification.
You can turn it on/off in the settings
Here are the steps
When the camera is on, short press the button, enter the menu, press button select ,
press button to confirm, press page down, find "Silent Mode" , press , select "
On
" and
press to confirm the setting.
Press exit.
Short press to turn on white light,short press again to turn it off.
When the flashlight turn on,you can see a lamp icon on the screen.
In a low-light environment (At night or in the dark), turning on IR can help users record more
details, and images recorded will be black and white.
Refer to “turn silent mode on”.
Silent Mode
Flashlight
Infrared Light
Turn Silent Mode On
Turn Silent Mode Off
- 9 -
In Standby Mode, press button to enter Menus, and go to SETUP, find “IR CUT” in .
1) Manual : Long press to turn on/off Infrared Light.
2) Auto : At night or in the dark, when photoresistor senses the low-light environment, Infrared
Light will be turned on/off automatically.
Short press to turn on the red dot laser,press again to turn off.
Caution:
Laser Point
This device generates a visible red light that is moderately hazardous and should not be
viewed by the naked eye on the same axis as the beam.
- 10 -
Alarm
Reset
Detele files
Format
Long press to turn on, the camera will emit a continuous siren and flash the LED light; long
press again to turn off.
Occasionally, you may need to perform a hardware reset when
the camera stops responding or if it appears to be “frozen”or
unresponsive.
To restart the dashcam, press and hold the Reset button
by inserting a small rod until the system powers off; press the
Power button to turn the dashcam on.
All files can not be deleted directly on this device; you can only delete files by connecting it to a
computer. The initial password is “000000.”
Long
press till you hear the second click,
short
press ,
short
press and
long
press
again till you see a pop-up box saying that "The sd card Format is processing",wait for a moment
and all the files will be deleted.
- 11 -
Walkie-talkie(Optional)
The multi-functional interface can be connected with an intercom system(The walkie-talkie
accessory needs to be purchased separately); press and hold button, dialogues will be sent;
release , dialogues will be received.
Note:
Note:
All data will be deleted. Before formatting your camera, please remember to backup your
important data on your other devices.
Some models may not support this function; please ask the seller or store if you're not sure.
Battery Level
During standby/Recording mode, you can see the battery level
on the right top of the screen.
- 12 -
During the Standby Mode, short press enter the setting menu.
Settings>>
Video resolution
1280x720 30P 16:9
/ 2560x1440 30P 16:9/ 2304x1296 30P 16:9/ 2560x1080 30P 21:9/
1920x1080 45P 16:9/ 1920X1080 30P 16:9/ 1920X1080 30P 16:9/ 1440x1080 30P
16:9/1280x720 60P 16:9/ 1280x720 30P 16:9/ 848x480 30P 16:9
Quality
High
/Medium/low
Pre-record
Off
/On
Pre-recording will record up to 30 seconds before the button is pressed.
Users that will not be recording all of the time can turn this option on to make
sure that everything going on is captured.
Note: 1.This feature will use extra battery power.
2.During pre-record mode, Press button will tap the current video,If
you want to record audio only, please turn off this function.
Video Menu
- 13 -
Record Delay
OFF/On
Delay recording works very similarly to pre-recording, only this option will
continue recording for a set number of seconds after the button has been
pressed.
Motion Detect
Off/On
Now, when the button is pressed, the video recording will start as usual.
However, if no movements are detected for 30 seconds, the camera will stop
recording to save space and battery life. Once any movements are detected, the
camera will start recording again.
Photo resolution
4M(2688x4845 16:9)
/ 6M(3200x1800 16:9)/ 9M(4032x2268 16:9)/ 13M(4800x2700
16:9)/ 18M(5632x3168 16:9)/ 23M(6400x3600 16:9)/ 34M(7800x4392 16:9)
Quality
High
/Medium/low
AE Setting
Sets the exposure level (-2 – +2) to adjust the brightness of the image.
The default setting is
Low (0)
.
Photo Menu
- 14 -
System Setting
System
PAL/
NTSC
Date & Time
Set the camera Time & Date (The initial
password is 000000)
LCD Brightness
25%~
100%
Adjust the LCD Screen Brightness
Auto Power Off
The device will shut down automatically at
the specified time.
(
Off
/1 min/2 min/3 min/5 min)
LCD Auto off
Selects Off to keep the LCD on, or sets the
timer for the LCD to turn off automatically (
5
SEC/
30 SEC
/1 min/3 min
). Selecting Screen
timeout will turn off the LCD (in the specified
time).After turned off, the screen will reduce
power consumption; the camera still works
and records under the display off. Press
Power Button , it will turn on.
Speaker Volumn
Adjust the volume（0~9） in the playback
video and System(Not the Mic volume)
- 15 -
Video File
Duration
Set the length of each video clip for a
continuous recording.
(1min/2mins/3mins/5mins/
10mins
).
Loop Recording
On
/Off
When the storage space is full, it can
automatically overwrite the unprotected
files.
If you turn it off,the camera will stop
recording when the sd card is full.
Slient Mode
Off
/On
When silent mode is enabled, all
Status LEDs and tones are turned Off.
Vibration is the only source of notifications.
Button Press Tone Turn
On
/ Off the button sound.
Number Beep
Turn on /
off
the voice prompt.
The camera will give voice prompts when
turning on and recording.
File Brower Mode
Photo Mode
/File Mode
High Low
Resolution
Change
Off
/On
When turned on, the camera will quickly
switch to the lowest resolution.
- 16 -
Change Password
Change your password with the default password 000000.
Use the Left and Right buttons to make selections.
Press to save and exit.
Change User ID
You can enter up to 6 characters for the User ID
(default passcode is 000000).
Press to select. When done,press to save and exit.
User ID will be marked in the file name
Change Device ID
You can enter up to 6 characters for the device ID.
Device ID will be marked in the file name
Lock Screen
Off
/On
Select on to lock the screen so you won't misoperate the camera.When the
screen off, only press the power button can wake up the camera.
Language Set the language.
Apply Defualt
Setting
Restore default settings
System
Information
Check the camera’s version information
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
Aolbea 1440P HD Polica Body Camera Build-in 64GB,Body-Worn Camera User manual
- Category
- Video surveillance kits
- Type
- User manual
- This manual is also suitable for
Aolbea 1440P HD Polica Body Camera Build-in 64GB,Body-Worn Camera is a useful tool for law enforcement that features a wide range of capabilities. With its 1440P HD camera, it can record clear and detailed videos even in low-light conditions thanks to the infrared night vision function and white light. Furthermore, the device can also take photos and record audio, making it a versatile tool for documentation. The body camera is equipped with a variety of sensors, including a photosensitive sensor, microphone, and speaker, allowing it to capture a comprehensive record of events.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
