Unitech UT-101 F Operating instructions
- Category
- Security device components
- Type
- Operating instructions
Unitech UT-101 F is a versatile and configurable Universal Indicator/Controller that can be used for accurately measuring and controlling various process parameters. It supports a wide range of input types, including thermocouples, RTDs, and linear inputs. The instrument offers a high level of accuracy and reliability, making it suitable for demanding industrial applications.
The UT-101 F features a user-friendly interface with four tactile keys for easy programming and configuration. It has multiple modes of operation, including normal, operation, configuration, setup, and change password modes. The large 4-digit LED display provides clear and visible readings of the measured values.
Unitech UT-101 F is a versatile and configurable Universal Indicator/Controller that can be used for accurately measuring and controlling various process parameters. It supports a wide range of input types, including thermocouples, RTDs, and linear inputs. The instrument offers a high level of accuracy and reliability, making it suitable for demanding industrial applications.
The UT-101 F features a user-friendly interface with four tactile keys for easy programming and configuration. It has multiple modes of operation, including normal, operation, configuration, setup, and change password modes. The large 4-digit LED display provides clear and visible readings of the measured values.
+91 94273 01436
Sales: Email :
www.unitechinstrument.com
Website:
“Sure for service with hi-end versal nology”Uni Tech
Add.-503/504,Helix Complex , Opp. Surya Hotel, Sayajigunj, Vadodra-05. Gujrat. INDIA, PH-0265 6623551
Model No. : UT-101 F
Model No. : UT-101 F
UNIVERSAL PROCESS INDICATOR / CONTROLLER
z
OPERATION MANUAL
z
AL-1
AL-2
CH-1
AL-1
AL-2
CH-1
C
O
M
A
L
-1
+91 94273 01436
Sales: Email :
www.unitechinstrument.com
Website:
“Sure for service with hi-end versal nology”Uni Tech
Add.-503/504,Helix Complex , Opp. Surya Hotel, Sayajigunj, Vadodra-05. Gujrat. INDIA, PH-0265 6623551
UNIVERSAL INDICATOR/CONTROLLER
PROGRAMMING FLOW CHART
TECHNICAL SPECIFICATION
FRONT PANEL DESCRIPTION
INTRODUCTION
TERMINAL ARRANGEMENT
INSTALLATION
4
2
1
3
3
+91 94273 01436
Sales: Email :
www.unitechinstrument.com
Website:
“Sure for service with hi-end versal nology”Uni Tech
Add.-503/504,Helix Complex , Opp. Surya Hotel, Sayajigunj, Vadodra-05. Gujrat. INDIA, PH-0265 6623551
OPERATION 5
ERROR MESSAGE AND TROUBLESHOOTING 8
PANEL CUTOUT 9
9REGISTER ADDRESS FOR MODBUS
Model No. : UT-101 F
F
F
F
F
F
F
F
F
F
F
The instrument is available in a panel mounted housing which
requires a cut out as per Panel cutout Dimensions given later .
A variety of power supply options are available for this. The
instrument has low drift precision components for long trouble
free operation. The instrument is a jumper less system. There are
different types of modes such as normal mode, operation mode,
configuration mode, setup mode, and change password mode.
4 keys provided can do any change in the mode.
The instrument can be configured for RTD or Thermocouple or
Linear input by making changes in configuration mode using 4
keys provided. This instrument can operate with full range for all
inputs.
Unitech Instrument’s Universal Indicator is designed to
accept thermo-couple or RTD or Linear Input and displays the
process parameter through a 4 Digit Red LED Display.
INTRODUCTION
zz
CONTENTS
zz
9CALIBRATION VALUES
F
+91 94273 01436
Sales: Email :
www.unitechinstrument.com
Website:
“Sure for service with hi-end versal nology”Uni Tech
Add.-503/504,Helix Complex , Opp. Surya Hotel, Sayajigunj, Vadodra-05. Gujrat. INDIA, PH-0265 6623551
Model No. : UT-101 F
PAGE:1
SR
SR
1
2
4
5
3
8
9
10
NO
11
NO
DISPLAY
8888
KEY
PV
AL1
AL2
COM
M
PARTICULAR
FUNCTION(M)
Actual Process Value
Red LED will glow on Relay 1 activation. (If Applicable)
Red LED will glow on Relay 2 activation. (If Applicable)
Red LED will blink when there is communication.
PV
ENTER
DESCRIPTION
Seven Segment LED display
DESCRIPTION
Press to access the programmable
Parameter.
(UP)
(PASS)
FRONT PANEL DESCRIPTION
zz
Press to increase selected digit or value
in Programming Mode.
Press to change digit selection or selected
value in Programming Mode.
Press to accept modified digit or
in Programming Mode.
value
12
M
Set Point
Press to Change Set point Value. Change up
and down when decimal dot blinking
*C
UT-101 F-F
*C
UT-101 F-F
AL-1 AL-2
COM.
(If Applicable)
TYPE RANGE RANGETYPE
4 to 20mA -1999 to 9999K-Type T/C -50 to 1200 ºC
0 to 20mA -1999 to 9999J-Type T/C -50 to 750 ºC
0.5 to 2.5V -1999 to 9999R-Type T/C 0 to 1750 ºC
1 to 5V -1999 to 9999S-Type T/C 0 to 1750 ºC
0 to 10VDC -1999 to 9999T-Type T/C 0 to 400 ºC
SPECIAL -1999 to 9999E-Type T/C -50 to 500 ºC
Cu 53 -50 to 250 ºCRTD PT-100 -50 to 400 ºC
INPUT
z
TECHNICAL SPECIFICATION
z
+91 94273 01436
Sales: Email :
www.unitechinstrument.com
Website:
“Sure for service with hi-end versal nology”Uni Tech
Add.-503/504,Helix Complex , Opp. Surya Hotel, Sayajigunj, Vadodra-05. Gujrat. INDIA, PH-0265 6623551
Model No. : UT-101 F
PAGE:2
Input Type
Input
Indication
Indication
On Off control
Control Mode
Dead Band controls
SSR Output
Retransmition Current & Voltage outputs
Output
Relay Output
Technical Specification
Transmitter power supply
24 V DC @ 30 mA max, isolated from I/p & O/P.
Range limits
Accuracy
Cold junction comp. & Sensor break ind.
Software base Automatic.
As per input range Table.
Input impedance
>330 K for Voltage ,mV, and T/C, 100 for current.ΩΩ
4 Digit 7 Segment display 0.56”
Status indication
24VDC @ 20 mA ,12VDC @ 20 mA
High and Low Set point for level applications.
Relay / SSR
Comunication
Wireless comunication
Programeble parameter & Connectable number
Modbus RTU RS- 485/RS- 232 communications.
Baud rate , Node, Parity , nodeaddress , stop bit. & 0-256 unit.
GSM/GPRS base mobile(sms) communications.
Programmable
Parameters
Full range as per input selection.
Display resolution
-1.999 to 9999 fully configurable for linear input
Other
(A) (B)Supply voltage Power consumption
V AC, 50/60 Hz 4 watts maximum(A) 110/230 (B)
Operating ambient temperature and humidity
Deadband alarm.
F.S. igh & owH L alarm
LEDs for Relay status & Communications
Special on demand :
Voltage
0-5V/1-5V, 0.5 -2.5V/0- DC10 V
.
.
Currant
0 ~ 20mA dc , 4~20mA DC
.
.
RTD
Pt100, Cu53 ( 2wire & 3 wire)
.
.
T/C
K, J, R, S, E, N, T
.
.
Setpoint / Hysteresis / High scale / Low scale
0~5V, 0~10V, 1~5V DC, fully 3 port isolated
0~20/ 4~20 mA,
0~50 °C
Below 90%, non condensing
Relay logic
+L+0.1 % of span for inear & RTD , 0.25 % for T/C
NO - C - NC Contacts , 5A@240 V AC Resistive
Communication Protocol & mathode
Programming of parameters
Through 4 tactile keys
Resistence
0-500 Ω , 0-1/5/10 KΩ, 1MΩ
.
.
200 mV 1000- /300V DC
1/2/3/4Relays/SSRoutput
(A) (B) (C)Dimensions Panel cutout Mounting
(A) (B) (C)96(H) x 96(W) x 100(D) 92 x 92 Panel mounted
0- & 0- /300/V DC,0-75/75/200 mV 1/10V/100
+91 94273 01436
Sales: Email :
www.unitechinstrument.com
Website:
“Sure for service with hi-end versal nology”Uni Tech
Add.-503/504,Helix Complex , Opp. Surya Hotel, Sayajigunj, Vadodra-05. Gujrat. INDIA, PH-0265 6623551
Model No. : UT-101 F
PAGE:3
INSTALLATION
zz
z
TERMINAL ARRANGEMENT
z
1. Phase
2. Neutral
3. RTD-Red wire, TC +
4. RTD-White wire, TC-
5. RTD-White wire, TC-, -mA, -V
6. +mA [4-20 / 0-20mA]
7. +V [0-10 / 0-5 / 1-5 / 3.5V]
8. +TPS [24VDC]
9. -TPS [24VDC]
10. D+ [RS-485]
11. D- [RS-485]
12. NC
13. C [RELAY]
14. NO
15. OUTPUT [OP+]
16. OUTPUT [OP-]
12345678910
11 12 13 14 15 16
SUPPLY
+mA
PN
+V
+TPS
-TPS
+
-mA/-V
NC1 C1 NO1
24VDC RELAY
CBA
T/C
--
RTD
T/C- T/C-T/C+
4~20mA 0~10VDC
D+ D-
RS-485
+OP -OP
OUTPUT
4-20mA
+91 94273 01436
Sales: Email :
www.unitechinstrument.com
Website:
“Sure for service with hi-end versal nology”Uni Tech
Add.-503/504,Helix Complex , Opp. Surya Hotel, Sayajigunj, Vadodra-05. Gujrat. INDIA, PH-0265 6623551
Model No. : UT-101 F
PAGE:4
PROGRAMMING FLOW CHART
zz
CA1nV
*
Any New Password
MODE
-
0000
COnf
1NP
PT-1
TSP1
LoN
TSP2
LoN
dp
0001
DEAD
no
CTYP
LEAN
oFFS
0005
0006
Password Protected
Password Protected
0000
setp
ZERO
span
SP1
Hys1
SP2
HYS2
nadd
baUd
9600
0001
0000
1000
0300
0002
0500
0002
oFST
oP-L
oP-H
0000
0000
1000
0000
CAL
CALZ
CALL
CALA
CALS
CALH
Password Protected
oPAS
CPAS
0000
8888
nPAS
*
Mode
Configuration
Setup
Mode ModeSelection
Change
Password Mode
Calibration
Mode
Default Password will be 0000
Protected Parameter Password will be 1111
NOTE :
PRESS + KEY
M
+91 94273 01436
Sales: Email :
www.unitechinstrument.com
Website:
“Sure for service with hi-end versal nology”Uni Tech
Add.-503/504,Helix Complex , Opp. Surya Hotel, Sayajigunj, Vadodra-05. Gujrat. INDIA, PH-0265 6623551
Model No. : UT-101 F
PAGE:5
This Mode is used to change Input , Relay and Communication Operation
Configuration
Parameter
Description
Range
Default Value
CONFIGURATION MODE PARAMETER
CONF
Password for Parameter Setting
Values between
Mode
0000
0000
Password for Configuration Parameter
0000 to 9999
Input Type
1NP
pt-1
Down the type by key or Up by key.
Pt-1
pt-1 : PT-100 (RTD)
1-5v :Linear1-5VDC
0-20 : Linear0-20mADC
4-20 : Linear4-20mADC
TTC.
STC.
R TC.
. TC
JTC.
: ‘T’ Type Thermo-Couple
: ‘S’ Type Thermo-Couple
: ‘R’ Type Thermo-Couple
: ‘K’ Type Thermo-Couple
: ‘J’ Type Thermo-Couple
. : Linear 0.5-2.5 V DC25v
: Linear0-10VDC10v
CU53 : CU-53 COPPER SENSOR
ETC.
: ‘E’ Type Thermo-Couple
(As per Reqd.)
4
Scroll the digit by key, increase by key.
Selection of input of the Instrument.
1. CONFIGURATION MODE
Decimal Point Selection
: No decimal(1234)
DP
0001
0001
Increase digit by key, decrease by key
0000
Alarm 1 Relay Action.
: Active in High
TSP1
L oN
LoN
Changethetypeby or key.
HoN
ON
OFF
PV
SV
ON
OFF
PV
SV
LON:
: Active in Low
LoN
HON:
Alarm 2 Relay Action.
TSP2
L oN
LoN
Changethetypeby or key.
: One decimal(123.4)
0001
: Two decimal(12.34)
0002
: Three decimal(1.234)
0003
: Active in High
HoN
: Active in Low
LoN
Active same as above
Dead Band
: Selected
dEAd
no
no
YES
: Not Selected
no
Changethetypeby or key.
Only one relay get operated in this parameter, relay
get active on set point 1 value and deactive in set
point-2value. Used for Level & Fan control.
SV-Hyst
SV+Hyst
CTC.
: ‘C’ Type Thermo-Couple
Baud Rate
baud
9600
9600
4800 : Baud rate 4800
Change the Rate by or key.
9600 : Baud rate 9600
192K : Baud rate 19200
Node Address
Values between
nAdd
0001
00010000 to 0127
Increase digit by key, decrease by key
Device address for Communication
+91 94273 01436
Sales: Email :
www.unitechinstrument.com
Website:
“Sure for service with hi-end versal nology”Uni Tech
Add.-503/504,Helix Complex , Opp. Surya Hotel, Sayajigunj, Vadodra-05. Gujrat. INDIA, PH-0265 6623551
Model No. : UT-101 F
PAGE:6
This Mode is used to Setting the instrument Parameter. To set zero span
value, alarm set points with hysteresis, offset etc.
2. SETUP MODE
Parameter
Description
Range
Default Value
Parameter
Description
Range
Default Value
SETUP MODE PARAMETER
sETP
Password for Parameter Setting
Mode
0000
0000
Scroll the digit by key, increase by key.
Zero or Low Display Value.
zero
0000
Scroll the digit by key, increase by key.
0000
Values between
0000
to
9999
Values between
4999
to
9999
Span or High Diaplay Value.
span
1000
Scroll the digit by key, increase by key.
0100Values between
4999
to
9999
Password for Setup Parameter
Display value at low Calibration point.
Display value at high Calibration point.
SetPoint#1
SP1
0300
Values from to
030.0
999.9000.0
Increase digit by key, decrease by key
Activation value for Relay - 1
Hys1
0002
Increase digit by key, decrease by key
Values from to
000.2
999.9000.0
Hysteresis # 1
Value Difference between Activation and De-
activation of Relay - 1
SetPoint#2
SP2
0500
Values from to
050.0
999.9000.0
Increase digit by key, decrease by key
Activation value for Relay - 2
Display Calculation
: Linear Type
CTYP
LeaN
Lean
Offset Factory set Value.
offs
0005
Note : Factory set value
Gain Factory set Value
Ca1n
0006
v
Lean
Parity
pr1t
nonE
none
EvEn : Even Parity
Change the type by or key.
odd : Odd Parity
nonE : None
Parity check for Communication
+91 94273 01436
Sales: Email :
www.unitechinstrument.com
Website:
“Sure for service with hi-end versal nology”Uni Tech
Add.-503/504,Helix Complex , Opp. Surya Hotel, Sayajigunj, Vadodra-05. Gujrat. INDIA, PH-0265 6623551
Model No. : UT-101 F
PAGE:7
This Mode is used to Calibration of the Instrument.
CALIBRATION MODE PARAMETER
CAL
3. CALIBRATION MODE
Parameter
Description
Range
Default Value
Password for Parameter Setting
Mode
0000
0000
Scroll the digit by key, increase by key.
Calibration Span.
CALs
----
----
Values between
0000
to
9999
According to Input type.
Password for Calibration Parameter
Calibration Zero.
CALZ
----
----
According to Input type.
Apply low signal (from input table) input
and press key.
Apply High signal (from input table) input
and press key.
Parameter
Description
Range
Default Value
ofst
0000
Values from to
000.0
999.9000.0
Offset to Process Value.
Scroll the digit by key, increase by key.
This value Increase OR Decrease the Display PV
Output Low
oP-L
0000
Increase digit by key, decrease by key
Process Value at 4 mA signal output.
Values from to
000.0
999.9000.0
Output High
oP-H
1000
Increase digit by key, decrease by key
Process Value at 20 mA Signal output.
Values from to
100.0
999.9000.0
Hys1
0002
Increase digit by key, decrease by key
Values from to
000.2
999.9000.0
Hysteresis # 2
for Thermocouple(T/C)
set 0.0mV for Zero Cali.
for Thermocouple(T/C)
set 42.0mV for E,J,K-T/C for
set 18.0mV for R,S,T-T/C for
Span Cali.
Span Cali.
+91 94273 01436
Sales: Email :
www.unitechinstrument.com
Website:
“Sure for service with hi-end versal nology”Uni Tech
Add.-503/504,Helix Complex , Opp. Surya Hotel, Sayajigunj, Vadodra-05. Gujrat. INDIA, PH-0265 6623551
Model No. : UT-101 F
PAGE:8
PASSWORD PROTECTED PARAMETER
Parameter
Description
Range
Default Value
Calibration Output Low.
CALL
Strt
Set the output by and key, Press key
to fix the desired output.
----According to output.
Calibration Output High.
CALH
Strt
Set the output by and key, Press key
to fix the desired output.
----According to Output.
Calibration Ambient.
CALA
0032
Set the Ambient by and key, Press
keytofixtheambienttemp.
----According to Output.
Parameter
Description
Range
Default Value
CHANGE PASSWORD PARAMETER
CPAS
New Password.
nPAS
----
Scroll the digit by key, increase by key.
Values between
0000
to
9999
New Desired Password
0000
Symptom Probable Solution
-Sensor break error
-Sensor not connected
-Replace sensor
-Check the sensor is connected correctly
Keypad no
function
-Keypads are locked
-Keypads defective
-Check Keypad continuity?
All LED’s
and display
not light
-No power to controller
-Control circuit failure
-Check power lines connection
-Check Control Supply Voltages.
-Replace keypads
OPEn
ERROR MESSAGE AND TROUBLESHOOTING
zz
Old Password.
oPAS
0000
Scroll the digit by key, increase by key.
Values between
0000
to
9999
Existing Password
0000
As reqd.
4. CHANGE PASSWORD MODE
+91 94273 01436
Sales: Email :
www.unitechinstrument.com
Website:
“Sure for service with hi-end versal nology”Uni Tech
Add.-503/504,Helix Complex , Opp. Surya Hotel, Sayajigunj, Vadodra-05. Gujrat. INDIA, PH-0265 6623551
Model No. : UT-101 F
PAGE:9
REGISTER ADDRESS FOR MODBUS RTU PROTOCOL
zz
SR NO ANALOG PARAMETERS ABSOLUTE ADDRES ACCESS TYPE
1 PROCESS VALUE 40001 READ ONLY
2 DECIMAL POINT 40002 READ ONLY
3 SETPOINT - 1 40003 READ/WRITE
4 SETPOINT - 2 40004 READ/WRITE
5 RELAY 1 STATUS 40005 READ ONLY
6 RELAY 2 STATUS 40006 READ ONLY
CALIBRATION VALUES
zz
*
* Span Calibration at 100ºC
INPUT ZERO-VALUE SPAN VALUE
J - T/C 0100-0600 6000-7800
K - T/C 0800-1000 6000-7800
R - T/C 0800-1000 6000-7800
S - T/C 0800-1000 6000-7800
T - T/C 0800-1000 6000-7800
4 - 20 mA 0100-0600 6000-7800
0 - 20 mA 0100-1000 6000-7800
1 - 5 VDC 0100-1000 6000-7800
10 V DC 0100-1000 6000-8000
PT-100 900-1500 2000-3000
E - T/C 0800-1000 6000-8000
C - T/C 0800-1000 6000-8000
We provide SCADA software (Online and Offline Report / Trend / part lading ) for flow analysis and data logging systems.
We can accept to make customized instruments & trucky systems (hardware and computer software) as per customers needs.
We can provide GSM mobile comm. and modbus RTU 232/485 connectivity with pc software in our entire product range.
We can provide our all instruments in MS or SS panel and also provide in flame proof and weather proof housing.
industrials procces automaton
Total solution provider for Industrials Automaton
PLC and HMI and hi speed communications module.
Servo Motors & Drives & AC drives / inverter
SCADA system (standard and customized computer software)
TEMPRETURE+RH
FLOW
PRESSURE
LEVEL
CLEAN ROOM/HVAC /PHARMA
SCADA SOFTWARE
JUMBO DISPLAY
OTHERES
Sensor
Isolator /convertor
Single channel universal indicator controller
Dual channel universal indicator controller
Temp. Sensor and temp.2 wire transmitter
Multy channel temp indicator(4,8,12,16,20)
PID and PROFILE controller
Temp. Scanner with software (4,,8,12,16,20)
data logger with pc software (4,8,12,16,20)
Temp.+Rh transmitter (sensor)
Temp.+Rh indicator cum controller
Humidity sensor/ indicator/ controller
Flow Metering Systems(volume / mass)
Orifice Flow Meter ((NG) gas / steam)
Ultrasonic Flow Meter
Magnetic Flow Meter (water)
Thermel Dispenser Air Flow Meter
Flow : Rate/Totlizer/Comuper/Batch
Flow indicator & Totalizers (universal-i/p)
Batch indicator cum controller
Natural Gas flow computer (as per AGA3)
Steam flow computer (saturated &superheated)
- On line temp.& Pressure compensation)
- On line temp.& Pressure compensation)
Flow indi.& Cont. (4-20 mA & frequency)
Low cost ½”& 1” Air/Gas Flow meter
Steam Flow meter
Natural gas & standard gas Flow meter
SCADA software (Online and Offline Report / Trend / part lading ) for flow analysis
High pressurizes tank level indication sys.
Ultrasonic level transmitter & controller
Conductivity level transmitter & contr.
Water Level Control systems.
Level Switch/Sensor.
Differantial pressure type level indicator.
Single/Dual channel indicator contr.
Pressure & vacuum transmitter
Differantial Pressure transmitter
Hi accurate digital pressure gauge.
Loop power indicator (PT/DP)
ItoP/EtoPconvertor.
Universal input Signal isolator & convertor & multiplexer
Multi channel Signal isolator & convertor & multiplexer
Loop powered Signal isolator & square root extractors
Equations computation modual & Linearization modual
Load cell to mA
Convertor
Amp.tomA
MV to mA
ACVtomA
DCVtomA
Ohms to mA/V
Temprature
Pressure
Vacuum
Humidity
Photo sensor
Proxi
Gas
Ssr
Thayrister
Procces value big indicator
Clocks with date and years
Production monitoring systems
-Display size : 2”,4”,6”,8”,12”
RPM/MPM indicator controller
Alarm annunciator(2 to 200 chnl.)
Auto manual station
Manual loaders & celebrators
Vibration sensors indicators
Gas starilizers control systems
Bagging controller (cements)
Control valves and positioners
Synchronized Digital Clocks / masters and slaves
Temp.+humidity transmitter
Temp.+humidity indicator Controller.
Temp.+RH +dp clean room indicator with sensor
Conductivity sensor indicator
PH sensor indicator(on line & table top )
We can gives all instruments in SS or flame proof panels and box
FLP temp indicator & contr.
AHU control panel with SCADA
Control valve (on/off & modulating)
FLP temp scanner and data loggers with software
Temp. & pressure & vacuum & magnehelic gauge
Diffrancial pressure swich and sensor
This software gives you access to real time process
parameters in numeric and graphical form. It is a
pre-engineered software package that provides all
benefits of on line data logging and trending, the
software can interface with multiple scanners,
indicator.pid,plc,and data acquisitions systems using.
multidrop Rs485 communication. With the feature of
historical data logging function the entire precess history can be
recorded for future analysis or validation.
Manufacturers of process Controls Instruments
Process automaton (PLCs ,HMI , SCADA,servo,drives)
Instruments calibration ( ARC/AMC/validation )
Sure for service with hi-end universal technology
Unitech Instruments
503/504 Helix Complex.Opp-Surya Hotel,Sayajigunj,
Vadodra-390005,Gujarat ,India
Phone.: 0265-6623551/6553555/2361241
E-mail :[email protected],[email protected]
URL :www.unitechinstrument.com
ax.:F
cell no :094273 01436
265-6623551
,
Manufacturers of process Controls Instruments
FLOW RATE-122.65
TOT- 12345678.25
AL-1
AL-2
COM
TEMP. PRES.
S.F./R.F.
AL-1
AL-3
AL-2
AL-4
COM
T
E
M
P
.
P
R
E
S
.
S
F
/R
F
FLOW
RATE-122.65
TOT- 12345678.25
CH-1
C
H
-2
C
H
-
3
C
H
-
4
U
NITE
C
H
UNITECH
-Www.unitechinstr ument.com
SMART CLEAN ROOM INDICATOR
CH-1
C
H
-
2
C
H
-
3
C
H
-4
CH-1
CH-2
C
H
-
3
C
H
-4
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
Unitech UT-101 F Operating instructions
- Category
- Security device components
- Type
- Operating instructions
Unitech UT-101 F is a versatile and configurable Universal Indicator/Controller that can be used for accurately measuring and controlling various process parameters. It supports a wide range of input types, including thermocouples, RTDs, and linear inputs. The instrument offers a high level of accuracy and reliability, making it suitable for demanding industrial applications.
The UT-101 F features a user-friendly interface with four tactile keys for easy programming and configuration. It has multiple modes of operation, including normal, operation, configuration, setup, and change password modes. The large 4-digit LED display provides clear and visible readings of the measured values.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Dwyer Series MPM User manual
-
Masibus Universal Transmitter UT-94 User manual
-
Omega FC-22 Series Owner's manual
-
Texmate LEOPARD Series User manual
-
Chromalox C4-IR Programming Manual
-
Texmate BL-40-TC Owner's manual
-
-
Simex SWE-N55L Owner's manual
-
AMALGAMATED INSTRUMENT RM3-PS Operation And Instruction Manual
-
Masibus 85XX+ Quick User Manual
