2. American Standard
  3. 0445004.020
0445004.020

American Standard 0445004.020 Specification

  • Hello! I am an AI chatbot trained to assist you with the American Standard 0445004.020 Specification. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
L3
© 2017 AS America Inc.
spec_0445-EdgemereConsole 4/17
EDGEMERE
®
COLLECTION
CONSOLE TABLE
METAL
EDGEMERE
®
COLLECTION CONSOLE TABLE
•Cleantransitionaldesignthatopensupasmall
bathroomwithoutsacricingstorage
•Featuresatempered-glassshelfforstorageand 
fronttowelbar
•CanbepairedwithanyEdgemereSinkTopavailablein
8"(203mm)centers,4"(102mm)centers,orsinglehole
•LegsavailableinChromeorBrushedNickel
Separate Components:
❏ 0445.008
SinkTop8"(203mm)centers
❏ 0445.004RSinktop4"(102mm)centers
❏ 0445.001SinkTopSingleHoleOnly
❏ 8719.000.002Consoletablelegs(Chrome)
❏ 8719.000R.295Consoletablelegs(BrushedNickel)
❏ 7720.018.002
DecorativeP-Trap(Chrome)
❏ 7720.018.295DecorativeP-Trap(BrushedNickel)
Nominal Dimensions with Sink:
17-1/2" x 25" x 35-11/16"
(444 x 634 x 906mm)
Compliance Certications -
Meets or Exceeds the Following Specications:
•ASMEA112.19.9MforNon-Vitreous
CeramicFixtures
•CAN/CSAB45Series
To Be Specied:
❏ Color:
❏PedestalTop:Whiteonly
❏ConsoleTableLegs:
002Chromeor295BrushedNickel
NOTES:
*
DIMENSIONSSHOWNFORLOCATIONOFSUPPLIESAND“P”TRAP
ARESUGGESTED.
FITTINGSNOTINCLUDEDANDMUSTBEORDEREDSEPARATELY.
PROVIDESUITABLEREINFORCEMENTFORALLWALLSUPPORTS.
INSTALLATIONINSTRUCTIONSSUPPLIEDWITHLAVATORY.
IMPORTANT:Dimensionsofxturesarenominalandmayvarywithinthe
rangeoftolerancesestablishedbyANSIStandardA112.19.9M.
Thesemeasurementsaresubjecttochangeorcancellation.Noresponsibility
isassumedforuseofsupersededorvoidedpages.
FINISHED
FLOOR
FOR
ANCHOR
SCREW
MOUNT
FINISHED
WALL
FINISHED
WALL
906mm
(35-11/16")
496mm
(19-1/2")
112mm
(4-7/16")
160mm
(6-5/16")
40mm
(1-9/16")
545mm
(21-1/2")
213mm
(8-3/8")
775mm
(30-1/2")
710mm
(28")
866mm
(34-1/16")
207mm
(8-1/8")
622mm
(24-1/2")
634mm
(25")
102mm
(4")
444mm
(17-1/2")
514mm
(20-1/4")
140mm
(5-1/2")
/