Feiss WB1751PN Installation guide

Type
Installation guide

This manual is also suitable for

Feiss WB1751PN allows users to customize the lighting in their space thanks to the use of a low voltage electronic dimmer. Its safety listing for damp locations means that it can be used in bathrooms and other humid areas. The fixture is also easy to install, with clear instructions provided in the manual. Overall, the Feiss WB1751PN is a versatile and stylish lighting fixture that is perfect for a variety of applications.

Feiss WB1751PN allows users to customize the lighting in their space thanks to the use of a low voltage electronic dimmer. Its safety listing for damp locations means that it can be used in bathrooms and other humid areas. The fixture is also easy to install, with clear instructions provided in the manual. Overall, the Feiss WB1751PN is a versatile and stylish lighting fixture that is perfect for a variety of applications.

1
Installation Instructions for
1A
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing NEC compliant
junction boxes.
This product is safety listed for damp locations.
This product may be dimmed with a low voltage electronic dimmer.
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
Edgebrook Large Vanity (LED)
1.1
WB1751
W 1751B
Vanity Strip
Secure the mounting plate to the junction box.
Connect the fixture ground wire to a suitable ground in accordance to local electrical codes.
Connect a red driver wire to the white fixture wires with a wire nut and the other red driver wire to the black fixture wires with a
wire nut.
Connect the white driver wire to the neutral power line wire with a wire nut.
Connect the black driver wire to the hot power line wire with a wire nut.
Properly place the driver and wire nut connections into the junction box, mount the fixture base onto the mounting plate, and
secure it with the Allen screws using an Allen wrench.
Install the bracket with the spacer to one of the ends of the fixture channel using a screw, then place a cover and spacer onto the
nipple and secure them in place by screwing on an endcap.
Install the shade by sliding it through the fixture channel and into the installed endcap.
Install the remaining bracket to the other end of the fixture channel using a screw, then place a cover and spacer onto the nipple
and secure them in place by screwing on an endcap.
1
2
3
4
5
6
7
SHADE
JUNCTION BOX
NIPPLE
MOUNTING
PLATE
ALLEN SCREW
ALLEN
WRENCH
BRACKET
WITH SPACER
5
SPACER
SCREW
COVER
ENDCAP
8
6
4
7
9
CHANNEL
8
GND
DRIVER
3
3
9
SAVETHESE INSTRUCTIONS!
4
7400 Linder Ave, Skokie, IL 160077
800.969.3347
www.Feiss.com
© 2015 Feiss.All rights reserved.The "Feiss" graphic is a
registered trademark of Feiss. Feiss reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Feiss WB1751PN Installation guide

Type
Installation guide
This manual is also suitable for

Feiss WB1751PN allows users to customize the lighting in their space thanks to the use of a low voltage electronic dimmer. Its safety listing for damp locations means that it can be used in bathrooms and other humid areas. The fixture is also easy to install, with clear instructions provided in the manual. Overall, the Feiss WB1751PN is a versatile and stylish lighting fixture that is perfect for a variety of applications.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI