Dwyer Model A-709 User manual

Model A-709
Dwyer
Brand
Dwyer
Model
Model A-709
Type
User manual

This manual is also suitable for

Bulletin E-24-A
DWYER INSTRUMENTS, INC.
Phone: 219/879-8000 www.dwyer-inst.com
P.O. BOX 373 • MICHIGAN CITY, INDIANA 46361, U.S.A. Fax: 219/872-9057 e-mail: info@dwyer-inst.com
Specifications - Installation and Operating Instructions
No. A-709 RTD Transmitter Enclosure
©Copyright 2008 Dwyer Instruments, Inc. Printed in U.S.A. 5/08 FR# 71-440727-10
PARTS LIST
(1) Enclosure
(1) Enclosure Cover
(1) 1/8˝ male NPT x 7/16-24 male Adapter
(1) 1/8˝ male NPT x 7/16 female Adapter
(1) 1/2˝ male NPT x 1/8˝ female Bushing
(2) M4x8 Socket Cap Screws
(1) 1/4˝ I.D. x 3/8˝ O.D. O-ring
ENCLOSURE ASSEMBLY
1. Insert 1/2˝ male NPT x 1/8˝ female adapter into enclosure
from bottom.
2. Place o-ring inside 7/16-24 female fitting and loosely
assemble it to the 7/16-24 male x 1/8˝ NPT adapter, then
assemble to adapter noted in step #1 as shown in Figure 1.
INSTALLING SERIES 651 RTD TRANSMITTER
1. Use M4x8 screws to attach RTD to enclosure.
2. Feed wiring through 1/2˝ NPT opening.
3. Connect wiring to appropriate terminals on transmitter.
INSTALLING SERIES RTD SENSOR
1. From inside of enclosure, feed tip of RTD sensor through
transmitter (if included) and fitting assembly.
2. Make sure wiring will clear all metal surfaces when cover
is replaced.
3. Lock RTD sensor in place by tightening the two hex fit-
tings outside the enclosure.
4. Use 1/8˝ NPT threads to mount assembled unit in place.
Optional A-345 1/8˝ NPT flange includes a gasket and two
self tapping screws for convenient installation on sheet
metal ducts, etc.
5. Attach RTD sensor wires to transmitter terminals if it is
installed within enclosure, if using a remotely located trans-
mitter, route wiring between sensor and transmitter to inside
through the 1/2˝ NPT opening.
6. Replace cover and tighten screws when wiring is com-
plete.
Shown with optional Series
RTD Temperature Transmitter
2-27/32
(72.23
1/2 NPT
3-5/32
(80.12)
1-21/32
(42.07)
1-5/8
(41.28)
1/2 male NPT
x 1/8 female NPT
1/8 male NPT
x 7/16-24 female
O-Ring
7/16-24 female
x 1/8 male NPT
Figure 1
E-24-A 5/27/08 11:56 AM Page 1
  • Page 1 1

Dwyer Model A-709 User manual

Model A-709
Dwyer
Brand
Dwyer
Model
Model A-709
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents