Garmin GPSMAP® 3010C Reference guide

Brand: Garmin

Model: GPSMAP® 3010C

Category: Navigators

Type: Reference guide

This manual is also suitable for

GPSMAP 3010C

GPSMAP

3006C/3010C

quick reference guide

Finding an Item

To nd an item from your current location:

1. Fromanypage,pressFINDtoopentheFindFromCurrentPositionPage.

2. Highlightacategory,andpressENTER.Forsomecategories,youmightneedto

selectmultiplesubcategories.

3. Highlightaniteminthesearchresultslist,andpressENTER.TheReviewPage

appearsshowingiteminformation,maplocation,chartname,distanceandbearing,

andoptionsforcreatingawaypointorviewingthenextiteminthesearchresultslist.

Marking a Waypoint

To mark your current location:

1. PressandholdENTER/MARKuntiltheReview

WaypointPageappears.TheGPSMAP3006C/3010C

capturesyourcurrentlocation,andthencreatesa

defaultnameandsymbolforthenewwaypoint.

2. Toacceptthewaypointwiththedefaultinformation,

pressENTER,ortochangeanywaypointinformation,

highlighttheappropriateeld,andpressENTER.

To create a new waypoint from a map feature:

1. Usethemappointertohighlightamapfeature.

2. PressandreleaseENTER/MARKtocapturethe

pointerlocation,andopentheReviewPage.

3. PresstheCreate WptsoftkeytoopentheReview

WaypointPage.

4. Toacceptthewaypointwiththedefaultinformation,

pressENTER,ortochangeanywaypointinformation,

highlighttheappropriateeld,andpressENTER.

Navigating to a Destination

To navigate to a destination:

1. Press

NAV

toaccesstheNavigationMenu.

2. HighlightGo To Point,Follow Route,Follow Track,orTracBack,andpressENTER.

3. UsetheROCKERtohighlightapoint,track,orroutefromthelist,andpressENTER.

4. Ifyouselectedapoint,presstheGo Tosoftkey.Ifyouselectedarouteorsavedtrack,

choosefromtheselections,andpressENTER.

5. FollowthemagentaroutecreatedontheMapPage.YoucanalsousetheCompassPage

tohelpyounavigate.

Using the MOB (Man OverBoard) Feature

The Man OverBoard (MOB) function simultaneously marks and sets a course back to the

marked location for quick response to emergency situations.

To start the MOB function:

1. PressandholdNAV/MOB.Amessage

appearsaskingyouifyouwanttobegin

navigationtotheMOBwaypoint.

2. PressENTERtobeginnavigatingtothe

MOBlocation.

3. TostopnavigationtotheMOBlocation,

pressNAV,highlightStop Navigation,and

pressENTER.

To stop navigation to the MOB location:

1. PressNAV/MOB.

2. HighlightStop Navigation,andpressENTER.

Review Waypoint Page

Review Map Point Page

Navigation Shown on the Map Page

Navigation Menu

Find From Current Position Page Review Waypoint Page

Man OverBoard

To turn on the GPSMAP 3006C/3010C:

1. PressandholdthePOWERkey.

2. WhentheI Agreeon-screenbuttonishighlighted,pressENTERtoacknowledgethe

warningandopentheMapPage.

Startup/Shutdown Sequence

To change a setting using the Main Menu:

1. Fromanypage,pressandholdADJ/MENU

toopentheMainMenu.

2. UsetheROCKERtoselectatab,andthenpress

rightorleftontheROCKERtoselectasubtab.

3. Highlighttheeldyouwanttochange,and

pressENTER.

4. Makeanychanges,andpressENTER.

5. PressQUITtoreturntothemainpage.

Using the Main Menu

ADJ—presstoshowavailableoptionsandfeaturesforthecurrent

function.

MENU—pressandholdtoopentheMainMenu.

POWER/BACKLIGHT—pressandholdtoturntheunitonoroff.Press

andreleasetoadjustthescreenbacklighting.

PAGE—presstocyclethroughthemainpagesinsequenceorreturn

fromasubpagetoamainpage.

QUIT—presstoreturntoapreviouspage,restoreadataeld’s

previousvalue,orexitoutofmenus.

ENTER—presstoselecthighlightedelds,conrmmenuoptions,or

enterdata.

MARK—pressandholdfortwosecondstocaptureyourcurrentlocation

andopentheReviewWaypointPage.

NAV—pressandreleasetoaccessnavigationoptions.

MOB(ManOverBoard)—pressandholdtomarkyourcurrentlocation

andinstantlysetareturncourse.

RANGE—presstozoominoroutoftheMapPageandHighwayPage,

oradjusttherangeofthesonarorradar.

ROCKER—pressup,down,right,orlefttomovethroughlists,

highlightelds,selectoptionsandlocations,enterdata,ormove

themappointer.

FIND—presstoinitiatetheFindoption,soyoucansearchforuser

points,mapitems,andanyoptionaldatacardinformation.

DATA—presstoshoworhidefunctionwindowsanddataeldsona

mainpage.

CNFG—pressandholdtoopentheCongurationwindowtocustomize

amainpage.

Using the GPSMAP 3006C/3010C Keypad

The GPSMAP 3006C/3010C contains ve main pages. Additional main pages appear as you

add optional hardware to the Garmin Marine Network. Press PAGE to view each page.

Viewing Main Pages

Adjusting the Backlight

To adjust the backlight level:

1. PressandreleasethePOWERkey.

2. PressupordownontheROCKERto

adjustthebacklightlevel.

3. Press ENTERtoquit.

FCTN—presstohighlightthenextavailableFunctionwindowonthe

splitscreen.

To turn off the GPSMAP 3006C/3010C:

1. PressandholdthePOWERkey.

 Ifonechartplotterisconnected,theunitshuts

down.Ifmultiplechartplottersareconnected,a

promptappears.

2. SelectYestoturnofftheentirenetwork,orselect

Notoputtheunitinsleepmode.

3. PressENTER.

Map Page

Video Page (Optional)

Map Split Page

3D Highway Page

Compass Page

Highest Selectable

Lowest

Main Menu

Warning Page Map Page

Garmin GPSMAP® 3010C Reference guide

Brand: Garmin

Model: GPSMAP® 3010C

Category: Navigators

Type: Reference guide

This manual is also suitable for

GPSMAP 3010C

Download PDF

report

Garmin GPSMAP® 3010C Reference guide

This manual is also suitable for

Garmin GPSMAP® 3010C Reference guide

Related papers

Other documents