TP-LINK TL-WR710N Quick Installation Guide

TL-WR710N
TP-LINK
Brand
TP-LINK
Model
TL-WR710N
Category
Networking
Type
Quick Installation Guide

TP-LINK TL-WR710N is a versatile wireless router that offers a range of features to enhance your home network. With its compact size and user-friendly interface, it's easy to set up and manage. The TL-WR710N supports various operating modes, including wireless router, access point, repeater, client, and WISP client router, providing flexibility for different scenarios. Additionally, it features a USB port that allows you to share files and media across your network or charge mobile devices. The device's built-in firewall and WPA/WPA2 encryption ensure the security of your wireless connections.

TP-LINK TL-WR710N is a versatile wireless router that offers a range of features to enhance your home network. With its compact size and user-friendly interface, it's easy to set up and manage. The TL-WR710N supports various operating modes, including wireless router, access point, repeater, client, and WISP client router, providing flexibility for different scenarios. Additionally, it features a USB port that allows you to share files and media across your network or charge mobile devices. The device's built-in firewall and WPA/WPA2 encryption ensure the security of your wireless connections.

150Mbps Wireless N Mini Pocket Router - Advanced Edition
MODEL NO. TL-WR710N
Package Contents
QIG
150Mbps Wireless N Mini Pocket Router - Advanced Edition
MODEL NO. TL-WR710N
Ethernet Cable
TL-WR710N
Quick Installation Guide
150Mbps TL-WR710N
7106506170 REV1.0.2
Instant Wireless Connection
Physical Description
Before hardware connection, please write down the
Wireless Password and SSID found on the label of your
TL-WR710N. Both are case-sensitive.
SSID
:
Default Network Name
Wireless Password/PIN
:
Default Password
LAN/WAN
: Must use this port to connect to your Modem while in Router
mode. For all other modes, use it as an additional LAN port.
Reset
It is used to reset the TL-WR710N to factory default settings.
For more detailed information about
Reset
, please refer to
Appendix: Troubleshooting
.
Reset
LAN/WAN
LAN
USB
LAN
: Connect your ethernet enabled devices for wired network access.
In client mode, use it to give wireless access to a wired-only device. In
access point mode, use it to receive network access from your local
network.
USB
It is used to connect USB ash or hard disk for le sharing. It can
also be used as a charging station for mobile devices.
S/N:XXXXXXXXXXXX
Model:TL-WR710N(US) Ver:1.0
Wireless Password/PIN:12345678
SSID:TP-LINK_663D6C
MAC:B0487A663D6C
IC: 8853A-WR710N
Power: 100
-
240V
~
50/60Hz 0.3A
Model: TL
-
WR710N
Default Access:
http://tplinklogin.net
Username: admin
Password : admin
150Mbps Wireless N Mini Pocket Router
-Advanced Edition
Status
TL-WR710N LED Guide:
LED
Solid Green
The device is working properly.
Blinking
System is booting.
The Ethernet Cable or USB Device is
connecting to the product.
Wireless Router Mode (Default)
Access Point Mode
2
1
Client Mode
3 4
WISP Client Router Mode
5
Repeater Mode
Operating Modes
Wired Ethernet
Connection
Protected by NAT Firewall
Wired Ethernet
Connection
def
Enter the Default Password, then click OK or
Next.
The examples illustrated below are from Windows 7. If you are using a dierent Windows, or a Mac Operating System, your screenshots may look dierent, but the procedure is the same.
Open Network and Sharing Center
Connections are available
TP-LINK_ XXXXXX
TP-LINK_Home
TP-LINK_Guest
TP-LINK_Neighbor
Free Public WiFi
Not Connected
Wireless Network Connection
Connect
Connect automatically
http://tplinklogin.net
Wireless Settings
Save
Wireless Network Name:
Enable SSID Broadcast
INSERT CUSTOM SSID HERE
(Also called the SSID)
Mode:
Enable Wireless Router Radio
Enable WDS Bridging
Channel Width:
Channel:
11bgn mixed
Auto
Auto
Customizing your Wireless Network Name & Password (Optional)
31 2
5
3 41 2 5
Open Network and Sharing Center
TP-LINK_XXXXXX
Internet access
TP-LINK_XXXXXX
TP-LINK_Home
TP-LINK_Guest
TP-LINK_Neighbor
Free Public WiFi
Currently connected to:
Wireless Network Connection
Connected
admin
Status
Quick Setup
WPS
Working Mode
Network
Wireless
DHCP
USB Settings
Forwarding
Security
Parental Control
Access Control
Advanced Routing
Bandwidth Control
IP & MAC Binding
Dynamic DNS
System Tools
Status
LAN
Wireless
4
Status
Quick Setup
WPS
Working Mode
Network
Wireless
DHCP
USB Settings
Forwarding
Security
Parental Control
Access Control
Advanced Routing
Bandwidth Control
IP & MAC Binding
Dynamic DNS
System Tools
- Wireless Settings
- Wireless Security
- Wireless MAC Filtering
- Wireless Advanced
- Wireless Statistics
Wireless Set
Wireless Ne
Ch
Wireless Settings
Save
Wireless Password:
WEP Key
Encryption:
Key Selected:
Version:
Encryption:
AES
Automatic
Automatic
Version:
WPA2-PSK
Radius Server IP:
Radius Port:
Radius Password:
Group Update Key Period:
(You can enter ASCII characters between 8 and 63 or Hexdecimal
Group Update Key Period:
Type:
WEP Key Format:
Automatic
Hexadecimal
Key 1:
Key 2:
Key 3:
Key 4:
Disabled
Disabled
Disabled
Disabled
Key Type
Seconds (Keep it default if you are not sure, m
WPA/WPA2 - Personal (Recommended)
WPA/WPA2 - Enterprise
WEP
Disable Security
INSERT CUSTOM PASSWORD HERE
1812
0
(1-65535, 0 stands for default port 1812)
(In seconds, minimum is 30, 0 means no upda
Reset
LAN/WAN
LAN
USB
Reset
LAN/WAN
LAN
USB
Wired Ethernet
Connection
Create an instant password-protected wireless
network with an NAT Firewall and share internet with
multiple devices. This mode is suitable for hotel
rooms and home networks.
(Note: if the hotel’s Internet has an authentication
process, you will need to authenticate only once and
only on one device)
Use as a wireless adapter for wired-only Ethernet
enabled devices. This mode is suitable for
connecting Smart TVs, game consoles, or computers
to your wireless network.
Repeat signal from an existing wireless network.
This mode is suitable to extend wireless coverage,
reaching devices that were previously too far from
your primary router to maintain a stable wireless
connection.
The repeated signal will display the same network
name and password as your existing wireless
network.
Create a wireless network from an Ethernet
connection. This mode is suitable for dorm rooms
or homes if there's already a wired router but you
need a wireless hotspot.
(Note: if the hotel’s Internet has an authentication
process, you will need to authenticate it on EACH
device.)
Use as a client router to receive internet access
from a Wireless Internet Service Provider (WISP),
and share that access with local devices.
Plug the TL-WR710N into a power outlet that is
near your modem or a wired ethernet connection.
Wait until the LED is blinking.
If you are connecting the TL-WR710N directly to
your cable modem, you must rst power reset the
modem and wait until its ONLINE LED is solid.
Then use an ethernet cable to connect to your
modem via the LAN/WAN port on the TL-WR710N.
If you are connecting the TL-WR710N to an existing
network, simply plug the ethernet cable into the
LAN/WAN port and to your network.
In either case, wait until the LED is solid green.
Click the Wireless Network icon on your desktop
( or ). Select the Default SSID of the
TL-WR710N, then click Connect.
Congratulations! You have successfully
connected to your network!
Open a web browser and go to the page
http://tplinklogin.net.
Enter the login username: admin and
password: admin.
To customise your Wireless Network Name Click
on “Wireless” from the menu on the left.
In the “Wireless Network Name” box, type in your
new Wireless Name. Then click “Save”
To customise your Wireless Password, click
“Wireless” from the menu on the left, then click
“Wireless Security”.
In the “Wireless Password” box under
“WPA/WPA2 - Personal (Recommended)” type
in your new wireless Password. Then click “Save”.
S/N:XXXXXXXXXXXX
Model:TL-WR710N(US) Ver:1.0
Wireless Password/PIN:12345678
SSID:TP-LINK_663D6C
MAC:B0487A663D6C
IC: 8853A-WR710N
Power: 100
-
240V
~
50/60Hz 0.3A
Model: TL
-
WR710N
Default Access:
http://tplinklogin.net
Username: admin
Password : admin
150Mbps Wireless N Mini Pocket Router
-Advanced Edition
©2016 TP-LINK
WISP Client Router Mode
3
www.tp-link.com
TP-LINK TECHNOLOGIES CO., LTD.
Access Point Mode
1
Set your wireless parameters. If desired, you may change your
Wireless Network Name, Wireless Security Mode, or Password.
Click “Next” and then “Reboot”.
Appendix 3: Troubleshooting (Continued)
Appendix 1: USB Features
Operating Mode Configuration
Wireless Router Mode
1
Choose your WAN Connection Type:
If you select Dynamic IP, click “Next” and continue to step 2.
If you select Static IP, then enter the IP Address and Subnet
Mask given to you by your ISP, and click “Next”.
If you select PPPoE, then enter the User Name and Password
given to you by your ISP, and click “Next”.
If you don't know your connection type, you may select
“Auto-Detect”. Before continuing, you must be connected to
your existing network or modem via the LAN/WAN Port.
2
Choose your WAN Connection Type:
1
2
Click “Survey” button to nd the available wireless networks.
Then select the SSID of your target network and click “Connect”.
The target network’s SSID and BSSID will automatically ll the
relevent wireless setting boxes. Select the Key type and enter the
Password. Click “Next” and then “Reboot”.
The USB port on the TL-WR710N can be used to share les, media,
and local storage space across your network.
Scan the QR code to access the Application
Guide for USB features on
http://www.tp-link.com/app/usb
Local Storage Sharing
Media Sharing
Reset
LAN/WAN
LAN
USB
Reset
LAN/WAN
LAN
USB
1 32
4
Storage Sharingand Media Server
You can also use the USB port to charge your phone or tablet!
http://tplinklogin.net
admin
The login username and password are case sensitive.
Status
Quick Setup
WPS
Working Mode
Network
Wireless
DHCP
USB Settings
Forwarding
Security
Parental Control
Access Control
Advanced Routing
Bandwidth Control
IP & MAC Binding
Dynamic DNS
System Tools
Quick Setup
The quick setup will tell you how to congure the basic network parameters.
To continue, please click the Next button.
To exit, please click the Exit button.
NextExit
Working Mode
NextBack
Wireless Router
Access Point
Repeater
Client
WISP Client Router
Start >> Working Mode >> Wireless >> Finish
Reset
LAN/WAN
LAN
USB
Reset
LAN/WAN
LAN
USB
Set your wireless parameters. If desired, you may change your
Wireless Network Name, Wireless Security Mode, or Password.
Click “Next” and then “Reboot”.
After the rebooting, reconnect to the network according to
“Instant Wireless Connection”.
If you select Dynamic IP, click “Next” and continue to step 2
If you select Static IP, then enter the IP Address and Subnet
Mask given to you by your ISP, and click “Next”.
If you select PPPoE, then enter the User Name and Password
given to you by your ISP, and click “Next”.
Less Interference = More Stability.
Less Obstacles = Better Performance
The Best Way is Half-Way
1
The target network‘s SSID will be automatically lled into the
wireless setting page. Select the Security Mode and enter the
Password. Then click “Next“.
2
Repeater/Client Mode
The examples illustrated below are from Repeater Mode, but the procedure is similar for Client Mode.
After the rebooting, reconnect to the network according to
“Instant Wireless Connection”.
After the rebooting, reconnect to the network according to
“Instant Wireless Connection”.
After the rebooting, reconnect to the network according to
“Instant Wireless Connection”.
Quick Setup - WAN Connection Type
Auto-Detect - Let the Router automatically detect the connection type your ISP provides.
Dynamic IP - Usually for Cable Modem and the router will automatically obtain an IP address from the DHCP server.
Static IP - This type of connection uses a permenant, xed (static) IP address that your ISP assigned.
PPPoE - Usually for ADSL Modem and you will need a PPPoE username and password from your ISP.
The Quick Setup is preparing to set up your connection type of WAN port.
The Router will try to detect the internet connection type your ISP provides if you select the Auto-Detect option.
Otherwise, you will need to specify the connection type manually.
Start >> Working Mode >> WAN Connection Type >> Wireless >> Finish
NextBack
Quick Setup - WAN Connection Type
Dynamic IP - Usually for Cable Modem and the router will automatically obtain an IP address from the DHCP server.
Static IP - This type of connection uses a permenant, xed (static) IP address that your ISP assigned.
PPPoE - Usually for ADSL Modem and you will need a PPPoE username and password from your ISP.
The Quick Setup is preparing to set up your connection type of WAN port.
Start >> Working Mode >> WAN Connection Type >> Wireless >> Finish
NextBack
Quick Setup - Wireless
Wireless Network Name:
INSERT CUSTOM SSID HERE
(Also called the SSID)
Mode:
Channel Width:
Channel:
11bgn mixed
Auto
Start >> Working Mode >> WAN Connection Type >> Wireless >> Finish
PSK Password:
Wireless Security:
WPA-PSK/WPA2-PSK
(You can enter ASCII characters between 8 and 63 or Hexadecimal characters betwee
INSERT CUSTOM PASSWORD HERE
NextBack
Auto
Wireless Radio:
Disable
Disable Security
No Change
Quick Setup - Wireless
Wireless Network Name:
INSERT CUSTOM SSID HERE
(Also called the SSID)
Mode:
Channel Width:
Channel:
11bgn mixed
Auto
Auto
Start >> Working Mode >> Wireless >> Finish
Wireless Password:
Wireless Security Mode:
Most Secure (WPA/WPA2-PSK )
(You can enter ASCII or Hexdecimal characters. For hexdecimal, the length should
be between 8 and 64 characters; for ASCII, the length should be between 8 and 63
characters. For good security it should be of ample length and should not be a
commonly known phrase.
INSERT CUSTOM PASSWORD HERE
AP Mode setting:
NextBack
Quick Setup - Wireless
SSID:
INSERT CUSTOM SSID HERE
BSSID:
WEP Index:
Local SSID:
Key Type:
1
WPA-PSK/WPA2-PSK
Start >> Working Mode >> WAN Connection Type >> Wireless >> Finish
Wireless Password:
Wireless Security Mode:
Most Secure (WPA/WPA2-PSK)
(You can enter ASCII or Hexdecimal characters. For hexdecimal, the length should
be between 8 and 64 characters; for ASCII, the length should be between 8 and 63
characters. For good security it should be of ample length and should not be a
commonly known phrase.
Client Setting
NextBack
Auth Type:
open
Password:
Survey
Example: 00-1D-0F-11-22-33
AP Setting
Quick Setup - Wireless
SSID:
TP-LINK_Network
BSSID:
WEP Index:
Local SSID:
Key Type:
1
WPA-PSK/WPA2-PSK
Start >> Working Mode >> WAN Connection Type >> Wireless >> Finish
Wireless Password:
Wireless Security Mode:
Most Secure (WPA/WPA2-PSK)
(You can enter ASCII or Hexdecimal characters. For hexdecimal, the length should
be between 8 and 64 characters; for ASCII, the length should be between 8 and 63
characters. For good security it should be of ample length and should not be a
commonly known phrase.
Client Setting
NextBack
Auth Type:
open
Password:
Survey
Example: 00-1D-0F-11-22-33
AP Setting
1234567890
94-0C-6D-2F-3C-BE
TP-LINK_2046F2
1234567890
Quick Setup - Wireless
Wireless Name of Root AP:
MAC Address of Root AP:
Start >> Working Mode >> Wireless >> Finish
Wireless Security Mode:
No Security
All security settings, for example the wireless password should match the Root AP.
If you choose No Security mode, the wireless stations will be able to connect
the AP without encryption. It is recommended strongly that you choose one of
following options to enable security.
Repeater Mode Setting:
NextBack
(Also called the SSID)
You can click the Survey Button to scan the network SSIDs,
and then choose the target one to setup the connection.
Repeater Mode:
Survey
Universal Repeater
WDS Repeater
Quick Setup - Wireless
Wireless Name of Root AP:
MAC Address of Root AP:
Start >> Working Mode >> Wireless >> Finish
Wireless Security Mode:
Most Secure (WPA-PSK/WPA2-PSK)
All security settings, for example the wireless password should match the Root AP.
If you choose No Security mode, the wireless stations will be able to connect
the AP without encryption. It is recommended strongly that you choose one of
following options to enable security.
Repeater Mode Setting:
NextBack
(Also called the SSID)
You can click the Survey Button to scan the network SSIDs,
and then choose the target one to setup the connection.
Repeater Mode:
Survey
Universal Repeater
WDS Repeater
Wireless Password:
1234567890
TP-LINK_Network
94-0C-6D-2F-3C-BE
Appendix 3: Troubleshooting
How do I restore my TL-WR710N to factory defaultsettings?
With the Router powered on, use a pin to press and hold the
Reset button for about 5 seconds.
What can I do if I forget my password?
Restore the TL-WR710N to its factory default settings (see
below).
Try to congure your Router once again by following the
instructions in the previous steps of the QIG.
1
2
To log in the Web Management page, use the default user
name and password: admin, admin.
To connect to the Wireless Network, use the default
password on the label.
Reset
LAN/WAN
LAN
USB
Reset
LAN/WAN
LAN
USB
5
3
4
Upon reset, the device will clear all previous congurations
and default to router mode.
I cannot access Internet via my Cable Modem. What do I do?
For Windows 7:
For Windows 8:
For Mac OS:
Appendix 2: Repeater Mode
Optimization Guide
Wireless Network Name (SSID)
Web Management Page Password
Web Management Page User Name
Wireless Password
Please use the space below to write down your
custom Wireless Network Name (SSID) and password,
and Web Management Page User Name and Password
Personal Conguration
For more troubleshooting support, please visit:
http://www.tp-link.com/en/support/faq
or contact our Unlimited 24/7 Technical Support
USA/Canada
Toll Free: +1 866 225 8139
Email: [email protected]
Unlimited 24/7
Technical Support
6
What can I do if my signal strength is low?
7
What can I do if I want to switch the Operating Mode or change
some settings?
Plug your TL-WR710N into a power outlet and use its LAN
port to connect your computer via Ethernet cable.
Disconnect from all wireless networks, and wait until the
LED is solid green.
Open a web browser and go to the page http://tplinklogin.net.
Enter the login username:
admin and password: admin.
After a successful login, click “Quick Setup” from the menu to
congure your TL-WR710N. Click “Next”.
Choose the Working Mode you need, then click “Next” and refer to
the sections below for further instruction.
Click “Survey” button to nd the available wireless networks.
Then select the SSID of your target network and click
“Connect”.
When choosing an ideal location to optimize the performance of
repeater mode, please keep the points below in mind.
Generally, the ideal location for your TL-WR710N is half-way
between your wireless router and your Wi-Fi enabled devices.
If that is not possible, placing the TL-WR710N closer to your
wireless router will ensure stable performance.
Try to choose a location that will minimize the number of
obstacles between the TL-WR710N and your wireless router.
Open corridors or other spacious locations will typically
provide better conditions for performance than a crowded
room.
Try to choose a location that minimizes interference from
devices operating on the same wireless frequency, such as
cordless phones bluetooth devices, and microwave ovens.
Reset the cable modem by powering it o, and then powering
it back on. Wait until its ONLINE LED is solid. Next, unplug the
TL-WR710N and plug it back in. This will allow you to access
Internet in most cases.
If the above does not work and you are unsure which mode
the TL-WR710N is in, please reset the TL-WR710N so that it
defaults back to Router Mode.
Low signal strength can be caused by obstruction from walls or
objects. If you are receiving low signal strength, try to place your
TL-WR710N in a higher location, keeping it away from
obstructed locations like under or behind a desk.
Generally speaking, putting your TL-WR710N in a location
central to your home will maximize your signal coverage.
In any time if you want to change the Operating Mode, please refer
to the "Operating Mode Conguration" Section to change the
mode. You may also change any settings via the Web management
page.
You need change your computer’s conguration settings to “obtain
an IP address automatically” and “obtain DNS server address
automatically.”
Please refer to the instructions below:
Go to Start -> Control Panel -> View network status and
tasks -> Change adapter settings.
Right click “Wireless Network Connection”or "Local Area
Connection", and select “Properties”.
Double click “Internet Protocol Version 4 (TCP/IPv4)” in the
list.
Set the TCP/IP Protocol to "Obtain an IP address
automatically", then click OK.
The TL-WR710N is on and I am connected, but I cannot access
the Web Management Page through my browser.
Go to Metro Interface -> Control Panel -> View network
status and tasks -> Change adapter settings.
Right click “Wireless Network Connection”or "Local Area
Connection", and select “Properties”.
Double click “Internet Protocol Version 4 (TCP/IPv4)” in the
list.
Set the TCP/IP Protocol to "Obtain an IP address
automatically", then click OK.
Click the Apple icon on the upper left corner of your screen.
Go to System Preferences -> Network.
Select “Airport” from the left menu bar and then click
“Advanced” for wireless conguration, or “Ethernet” for wired
conguration.
Set “Congure IPv4” to “Using DHCP”, then click “Apply”.
What can I do if my wireless keeps dropping?
By default, your wireless channel setting is set to “auto” This
setting causes the TL-WR710N to select the least congested
channel between 1 and 11, allowing you to achieve the best
performance.
You may be experiencing frequent wireless drops due to an often
changing channel setting. In this case, setting your wireless
channel setting to a static channel between 1 and 11 will prevent
the wireless frequency from changing, and likely stabilize your
network connection.
  • Page 1 1
  • Page 2 2

TP-LINK TL-WR710N Quick Installation Guide

TL-WR710N
TP-LINK
Brand
TP-LINK
Model
TL-WR710N
Category
Networking
Type
Quick Installation Guide

TP-LINK TL-WR710N is a versatile wireless router that offers a range of features to enhance your home network. With its compact size and user-friendly interface, it's easy to set up and manage. The TL-WR710N supports various operating modes, including wireless router, access point, repeater, client, and WISP client router, providing flexibility for different scenarios. Additionally, it features a USB port that allows you to share files and media across your network or charge mobile devices. The device's built-in firewall and WPA/WPA2 encryption ensure the security of your wireless connections.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents