INSTALLATION
INSTRUCTIONS
CAM200IP / CAM210IP
© 2016 Raymarine UK Limited
87232-3Document number:
04-2016Date:
English (EN)
Trademarkandpatentsnotice
Raymarine,Tacktick,ClearPulse,Truzoom,HSB,SeaTalk,SeaTalk
hs
,SeaTalk
ng
,Micronet,Raytech,
GearUp,MarineShield,Seahawk,Autohelm,Automagic,andVisionalityareregisteredorclaimed
trademarksofRaymarineBelgium.
FLIR,DownVision,SideVision,Dragony,Instalert,InfraredEverywhere,andTheWorld’sSixth
SenseareregisteredorclaimedtrademarksofFLIRSystems,Inc.
Allothertrademarks,tradenames,orcompanynamesreferencedhereinareusedforidenticationonly
andarethepropertyoftheirrespectiveowners.
Thisproductisprotectedbypatents,designpatents,patentspending,ordesignpatentspending.
FairUseStatement
Youmayprintnomorethanthreecopiesofthismanualforyourownuse.Youmaynotmakeanyfurther
copiesordistributeorusethemanualinanyotherwayincludingwithoutlimitationexploitingthemanual
commerciallyorgivingorsellingcopiestothirdparties.
Softwareupdates
Important:ChecktheRaymarinewebsiteforthelatestsoftwarereleasesforyourproduct.
www.raymarine.com/software
Producthandbooks
ThelatestversionsofallEnglishandtranslatedhandbooksareavailabletodownloadinPDFformatfromthewebsite
www.raymarine.com.
Pleasecheckthewebsitetoensureyouhavethelatesthandbooks.
Copyright©2015RaymarineUKLtd.Allrightsreserved.
ENGLISH
Documentnumber:87232-3
Date:04-2016
Contents
Chapter1Importantinformation........................7
CertiedInstallation...................................................7
PowerOverEthernet(PoE)........................................7
Wateringress............................................................7
Disclaimer.................................................................8
EMCinstallationguidelines........................................8
Suppressionferrites...................................................8
Connectionstootherequipment.................................8
Declarationofconformity............................................8
Productdisposal........................................................8
Warrantyregistration..................................................8
IMOandSOLAS........................................................9
Technicalaccuracy....................................................9
Chapter2Documentandproduct
information...........................................................11
2.1Documentinformation..........................................12
2.2Productoverview.................................................13
Chapter3Planningtheinstallation...................15
3.1Installationchecklist.............................................16
3.2Compatiblemultifunctiondisplays.........................16
3.3Partssupplied......................................................17
3.4T oolsrequired......................................................18
3.5Typicalsystems...................................................18
3.6Warningsandcautions.........................................19
3.7Generallocationrequirements..............................19
3.8Panandtilt..........................................................20
3.9Productdimensions..............................................20
Chapter4Cablesandconnections....................21
4.1Generalcablingguidance.....................................22
4.2Connectionsoverview..........................................23
4.3Poweroptions......................................................23
4.4Powerconnection................................................24
4.5Networkconnection..............................................26
Chapter5Mounting.............................................29
5.1Mountingtheunit.................................................30
Chapter6Operation............................................31
6.1Operationinstructions...........................................32
6.2Webbrowserinterface..........................................32
6.3Reversevideoandvideoip.................................35
6.4Resettingthecameratofactorydefaults................35
Chapter7Maintenance.......................................37
7.1Routinechecks....................................................38
7.2Unitcleaninginstructions......................................38
Chapter8Systemchecksand
troubleshooting...................................................39
8.1Troubleshooting...................................................40
8.2LEDstatus...........................................................40
8.3IPcameratroubleshooting....................................41
8.4Resettingthecamera...........................................42
Chapter9Technicalsupport..............................43
9.1Raymarineproductsupportandservicing..............44
Chapter10Technicalspecication....................45
10.1T echnicalspecication........................................46
Chapter11Sparesandaccessories..................49
11.1Networkhardware..............................................50
11.2RayNettoRJ45adaptercables...........................51
11.3Networkcableconnectortypes............................52
11.4RayNettoRayNetcablesandconnectors...........53
5
6CAM200IP/CAM210IP
Chapter1:Importantinformation
CertiedInstallation
Raymarinerecommendscertiedinstallationbya
Raymarineapprovedinstaller.Acertiedinstallation
qualiesforenhancedproductwarrantybenets.
ContactyourRaymarinedealerforfurtherdetails,
andrefertotheseparatewarrantydocumentpacked
withyourproduct.
Warning:Productinstallationand
operation
•Thisproductmustbeinstalledand
operatedinaccordancewiththe
instructionsprovided.Failuretodoso
couldresultinpersonalinjury,damage
toyourvesseland/orpoorproduct
performance.
•Raymarinerecommendscertied
installationbyaRaymarineapproved
installer.Acertiedinstallationqualies
forenhancedproductwarrantybenets.
ContactyourRaymarinedealerfor
furtherdetails,andrefertotheseparate
warrantydocumentpackedwithyour
product.
Warning:PoweringPoEdevices
Thisdevicecanbepoweredoverits
ethernetconnection(PoE)ORviaits
dedicatedpowercable.
NEVERconnectthedevicesdedicated
powercablewhenthedeviceisbeing
suppliedPoE.
Warning:Positivegroundsystems
Donotconnectthisunittoasystemwhich
haspositivegrounding.
Warning:Powersupplyvoltage
Connectingthisproducttoavoltage
supplygreaterthanthespecied
maximumratingmaycausepermanent
damagetotheunit.RefertotheTechnical
specicationsectionforvoltagerating.
Warning:Switchoffpowersupply
Ensurethevessel’spowersupplyis
switchedOFFbeforestartingtoinstallthis
product.DoNOTconnectordisconnect
equipmentwiththepowerswitchedon,
unlessinstructedinthisdocument.
Caution:Powersupplyprotection
Wheninstallingthisproductensurethe
powersourceisadequatelyprotected
bymeansofasuitably-ratedfuseor
automaticcircuitbreaker.
Warning:Ensureallequipmenthas
isolatedpowersupply
Thisproductfeaturesanisolatedpower
supply.Topreventpotentialdamageto
equipment,Raymarinerecommendsthat
anyexternalequipmentconnectedtothis
productalsofeaturesanisolatedpower
supply.
PowerOverEthernet(PoE)
PoEisasystemwhichallowselectricalpowertobe
passedfromaPSE(PowerSourcingEquipment)
devicealongtheethernetconnectiontosupplypower
toaPD(PoweredDevice).Thisallowsasingle
cabletobeusedtoprovidebothdataconnection
andelectricalpowertocompatibledevices.
PoEClassications
PSEdevicesdetecttheindicatedpowerrange/
classicationofconnectedPDsandallocatethe
necessarymaximumpowerbasedonthePDs
classication
ThePoEclassicationsareasfollows:
PoEClass
Current
(mA)
Powerrange
(Watt)
Class
description
Class0
0to40.44Wto
12.94W
-
Class1
9to120.44Wto
3.84W
Verylow
power
Class2
17to203.84Wto
6.49W
Lowpower
Class3
26to306.49Wto
12.95W
Midpower
Class4
36to4412.95Wto
25.5W
Highpower
ThePSEwillalwaysallocatethemaximumpower
basedontheclassicationofthePD.
Caution:Serviceandmaintenance
Thisproductcontainsnouserserviceable
components.Pleasereferallmaintenance
andrepairtoauthorizedRaymarine
dealers.Unauthorizedrepairmayaffect
yourwarranty.
Wateringress
Wateringressdisclaimer
Althoughthewaterproofratingcapacityofthis
productmeetsthestatedIPXstandard(refertothe
product’sTechnicalSpecication),waterintrusion
andsubsequentequipmentfailuremayoccurifthe
productissubjectedtocommercialhigh-pressure
washing.Raymarinewillnotwarrantproducts
subjectedtohigh-pressurewashing.
Importantinformation
7
Disclaimer
Raymarinedoesnotwarrantthatthisproductis
error-freeorthatitiscompatiblewithproducts
manufacturedbyanypersonorentityotherthan
Raymarine.
Raymarineisnotresponsiblefordamagesorinjuries
causedbyyouruseorinabilitytousetheproduct,
bytheinteractionoftheproductwithproducts
manufacturedbyothers,orbyerrorsininformation
utilizedbytheproductsuppliedbythirdparties.
EMCinstallationguidelines
Raymarineequipmentandaccessoriesconformto
theappropriateElectromagneticCompatibility(EMC)
regulations,tominimizeelectromagneticinterference
betweenequipmentandminimizetheeffectsuch
interferencecouldhaveontheperformanceofyour
system
CorrectinstallationisrequiredtoensurethatEMC
performanceisnotcompromised.
Note:InareasofextremeEMCinterference,
someslightinterferencemaybenoticedonthe
product.Wherethisoccurstheproductandthe
sourceoftheinterferenceshouldbeseparatedby
agreaterdistance.
ForoptimumEMCperformancewerecommend
thatwhereverpossible:
•Raymarineequipmentandcablesconnectedto
itare:
–Atleast1m(3ft)fromanyequipment
transmittingorcablescarryingradiosignalse.g.
VHFradios,cablesandantennas.Inthecase
ofSSBradios,thedistanceshouldbeincreased
to7ft(2m).
–Morethan2m(7ft)fromthepathofaradar
beam.Aradarbeamcannormallybeassumed
tospread20degreesaboveandbelowthe
radiatingelement.
•Theproductissuppliedfromaseparatebattery
fromthatusedforenginestart.Thisisimportantto
preventerraticbehavioranddatalosswhichcan
occuriftheenginestartdoesnothaveaseparate
battery.
•Raymarinespeciedcablesareused.
•Cablesarenotcutorextended,unlessdoingsois
detailedintheinstallationmanual.
Note:Whereconstraintsontheinstallation
preventanyoftheaboverecommendations,
alwaysensurethemaximumpossibleseparation
betweendifferentitemsofelectricalequipment,to
providethebestconditionsforEMCperformance
throughouttheinstallation
Suppressionferrites
•Raymarinecablesmaybepre-ttedorsupplied
withsuppressionferrites.Theseareimportantfor
correctEMCperformance.Ifferritesaresupplied
separatelytothecables(i.e.notpre-tted),you
musttthesuppliedferrites,usingthesupplied
instructions.
•Ifaferritehastoberemovedforanypurpose(e.g.
installationormaintenance),itmustbereplacedin
theoriginalpositionbeforetheproductisused.
•Useonlyferritesofthecorrecttype,suppliedby
Raymarineoritsauthorizeddealers.
•Whereaninstallationrequiresmultipleferritesto
beaddedtoacable,additionalcableclipsshould
beusedtopreventstressontheconnectorsdue
totheextraweightofthecable.
•Ifyourcamerainstallationrequireslongcable
runs,youmayneedtotadditionalferritesto
maintainacceptableEMCperformance.
Connectionstootherequipment
Requirementforferritesonnon-Raymarinecables
IfyourRaymarineequipmentistobeconnected
tootherequipmentusingacablenotsuppliedby
Raymarine,asuppressionferriteMUSTalwaysbe
attachedtothecableneartheRaymarineunit.
Declarationofconformity
RaymarineUKLtd.declaresthatthisproductis
compliantwiththeessentialrequirementsofEMC
directive2004/108/EC.
TheoriginalDeclarationofConformitycerticate
maybeviewedontherelevantproductpageat
www.raymarine.com.
Productdisposal
Disposeofthisproductinaccordancewiththe
WEEEDirective.
TheWasteElectricalandElectronicEquipment
(WEEE)Directiverequirestherecyclingofwaste
electricalandelectronicequipment.
Warrantyregistration
ToregisteryourRaymarineproductownership,
pleasevisitwww.raymarine.comandregisteronline.
Itisimportantthatyouregisteryourproductto
receivefullwarrantybenets.Yourunitpackage
includesabarcodelabelindicatingtheserialnumber
oftheunit.Youwillneedthisserialnumberwhen
registeringyourproductonline.Youshouldretain
thelabelforfuturereference.
8CAM200IP/CAM210IP
IMOandSOLAS
Theequipmentdescribedwithinthisdocument
isintendedforuseonleisuremarineboatsand
workboatsNOTcoveredbyInternationalMaritime
Organization(IMO)andSafetyofLifeatSea
(SOLAS)CarriageRegulations.
Technicalaccuracy
Tothebestofourknowledge,theinformationinthis
documentwascorrectatthetimeitwasproduced.
However,Raymarinecannotacceptliabilityforany
inaccuraciesoromissionsitmaycontain.Inaddition,
ourpolicyofcontinuousproductimprovementmay
changespecicationswithoutnotice.Asaresult,
Raymarinecannotacceptliabilityforanydifferences
betweentheproductandthisdocument.Please
checktheRaymarinewebsite(www.raymarine.com)
toensureyouhavethemostup-to-dateversion(s)of
thedocumentationforyourproduct.
Importantinformation
9
10CAM200IP/CAM210IP
2.1Documentinformation
Thisdocumentcontainsimportantinformation
relatedtotheinstallationofyourRaymarineproduct.
Thedocumentincludesinformationtohelpyou:
•planyourinstallationandensureyouhaveallthe
necessaryequipment;
•installandconnectyourproductaspartofawider
systemofconnectedmarineelectronics;
•troubleshootproblemsandobtaintechnical
supportifrequired.
ThisandotherRaymarineproductdocuments
areavailabletodownloadinPDFformatfrom
www.raymarine.com.
Applicableproducts
Thisdocumentisapplicabletothefollowingproducts:
PartnumberNameDescription
E70262
CAM200IP
Abovedecks
BulletIP
Camera
E70346
CAM210IP
Abovedecks
BulletIP
Camera
Documentillustrations
Yourproductmaydifferslightlyfromthatshown
intheillustrationsinthisdocument,dependingon
productvariantanddateofmanufacture.
Allimagesareprovidedforillustrationpurposesonly.
Productdocumentation
Thefollowingdocumentationisapplicabletoyour
product:
DescriptionPartnumber
CAM200IP/CAM210IPBulletIPCameras
Installationinstructions
InstallationofaCAM200IPorCAM210IP
andconnectiontoawidersystemofmarine
electronics.
87232
CAM200IP/CAM210IPsurfacemounting
template
MountingdiagramformountingaCAM200IP
orCAM210IP.
87233
LighthouseMFDOperationInstructions
DetailstheoperationoftheCamera
applicationforaSeries,cSeries,eSeries,
andeSSeriesmultifunctiondisplays.
81360
gSSeriesInstallationandoperation
instructions
IncludesdetailsforoperationoftheCamera
applicationonagSSeriesMFD.
81344
Operationinstructions
Fordetailedoperationinstructionsforyourproduct,
refertothedocumentationthataccompaniesyour
display.
12
CAM200IP/CAM210IP
2.2Productoverview
CAM200IP
TheCAM200IPisanInfraredilluminated(I
2
)bulletIP
camerawithbothdayandnightvision.Inconjunction
withacompatiblemultifunctiondisplay(MFD),the
cameraprovidesahigh-denitionimagewhichcan
beviewedorrecordedforlaterplayback.
D13081-1
Thecamerahasthefollowingfeatures:
•2megapixel1/2.8"SONYprogressivescan
CMOSimagesensorforexcellentimagequality
(Exmor)
•6mmmegapixelboardlens
•20mI
2
beamdistance
•FieldofView(Diagonal=63.6°/Horizontal=
53.3°/Vertical=33.1°±3°)
•Multi-streamingofH.264andMJPEG
•HD720p(1280x720Default)–Full1080p
supported
•12Vdcpower
•Class2PoEdevice(IEEE802.3af)
ThecameracanalsobeconnectedtoaPCwhich
enablesuseofthebuilt-inwebinterfacetoaccess
additionalfeatures.Theseadditionalfeaturescan
onlybesetorusedviaaconnectedPC.
Approximaterecordtimes
TheapproximaterecordtimesaredependantonIP
cameraresolutionandsettings,lightingconditions
andavailablestoragespace.
ARaymarine
®
CAM200IP,settofactorydefault
settingscanrecordatanapproximaterateof22.5
MBperminute;allowingupto44minutesofrecord
timeper1GBofavailablestoragespace.
CAM210IP
TheCAM210IPisanInfraredilluminated(I
2
)bulletIP
camerawithbothdayandnightvision.Inconjunction
withacompatiblemultifunctiondisplay(MFD),the
cameraprovidesahigh-denitionimagewhichcan
beviewedorrecordedforlaterplayback.
D13473-1
Thecamerahasthefollowingfeatures:
•2megapixel1/2.8"SONYprogressivescan
CMOSimagesensorforexcellentimagequality
(Exmor)
•6mmmegapixelboardlens
•20mI
2
beamdistance
•FieldofView(Diagonal=63.6°/Horizontal=
53.3°/Vertical=33.1°±3°)
•Integratedsunshieldwithblackreector
•Multi-streamingofH.264andMJPEG
•FullHD(supportsimageresolutionsupto1920x
1080(1080p),at30fps)
•12Vdcpower
•Class2PoEdevice(IEEE802.3af)
ThecameracanalsobeconnectedtoaPCwhich
enablesuseofthebuilt-inwebinterfacetoaccess
additionalfeatures.Theseadditionalfeaturescan
onlybesetorusedviaaconnectedPC.
Approximaterecordtimes
TheapproximaterecordtimesaredependantonIP
cameraresolutionandsettings,lightingconditions
andavailablestoragespace.
ARaymarine
®
CAM210IP,settofactorydefault
settingscanrecordatanapproximaterateof22.5
MBperminute;allowingupto44minutesofrecord
timeper1GBofavailablestoragespace.
Documentandproductinformation
13
14
CAM200IP/CAM210IP
Chapter3:Planningtheinstallation
Chaptercontents
•3.1Installationchecklistonpage16
•3.2Compatiblemultifunctiondisplaysonpage16
•3.3Partssuppliedonpage17
•3.4Toolsrequiredonpage18
•3.5Typicalsystemsonpage18
•3.6Warningsandcautionsonpage19
•3.7Generallocationrequirementsonpage19
•3.8Panandtiltonpage20
•3.9Productdimensionsonpage20
Planningtheinstallation
15
3.1Installationchecklist
Installationincludesthefollowingactivities:
InstallationTask
1Planyoursystem.
2
Obtainallrequiredequipmentandtools.
3
Siteallequipment.
4Routeallcables.
5
Drillcableandmountingholes.
6Makeallconnectionsintoequipment.
7
Secureallequipmentinplace.
8Poweronandtestthesystem.
Schematicdiagram
Aschematicdiagramisanessentialpartofplanning
anyinstallation.Itisalsousefulforanyfuture
additionsormaintenanceofthesystem.The
diagramshouldinclude:
•Locationofallcomponents.
•Connectors,cabletypes,routesandlengths.
3.2Compatiblemultifunctiondisplays
Thisproductiscompatiblewiththefollowing
LightHousepoweredRaymarinemultifunction
displays.
•aSeries,cSeries,eSeries,eSSeries.
•gSSeries.
Multifunctiondisplaysoftwarerequirements
Theoperationofthisproductrequiresthatyour
Raymarine
®
MFDisrunningLightHouseIIsoftware
version12.xxorlater.
Note:ThelatestMFDsoftwarecanbeobtained
byvisitingwww.raymarine.com/software.
16CAM200IP/CAM210IP
3.3Partssupplied
CAM200IP
Thefollowingitemsaresuppliedwithyourproduct.
ItemDescriptionQuantity
IPcamera(Includesa1
m(39.4in)ethernetand
powerpigtailcable)
1
Documentationand
softwarepack
1
Mountingscrews3
Nylonwashers3
Hexwrench(Allenkey)
1
WaterproofRJ45coupler
1
Note:T oconnectthecameratoacompatible
MFD,aRayNettoSeaTalk
hs
(male)adaptorcable
isalsorequired.Fordetailsonavailablenetwork
hardwareandcablesrefertoChapter11Spares
andaccessories
CAM210IP
Thefollowingitemsaresuppliedwithyourproduct.
ItemDescriptionQuantity
IPcamera(Includesa1
m(39.4in)ethernetand
powerpigtailcable)
1
Documentationand
softwarepack
1
Mountingscrews3
Nylonwashers3
ItemDescriptionQuantity
Hexwrench(Allenkey)
1
WaterproofRJ45coupler
1
Note:T oconnectthecameratoacompatible
MFD,aRayNettoSeaTalk
hs
(male)adaptorcable
isalsorequired.Fordetailsonavailablenetwork
hardwareandcablesrefertoChapter11Spares
andaccessories
Planningtheinstallation
17
3.4Toolsrequired
Productinstallationrequiresthefollowingtools:
ItemDescription
Powerdrill
Drillbitofappropriatesize*
Pozidrivescrewdriver
Note:*Theappropriatedrillbitsizeisdependent
onthethicknessandmaterialofthemounting
surface.
3.5Typicalsystems
Note:Forinformationonhowtoconnectthe
product,refertotheChapter4Cablesand
connectionssection.Forinformationonavailable
cablesandaccessories,refertotheChapter11
Sparesandaccessoriessection.
•Basicmultifunctiondisplay(MFD)system:
Youcanconnecttheproductdirectlytoa
multifunctiondisplayusingthesuppliedRJ45
coupler,andanadditionaladaptorcable(referto
the4.5Networkconnectionsectionfordetails).If
youareconnectingtheproducttoana,c,e,or
eSSeriesMFD,thecamerarequiresaseparate
powersource,eitherconnectingdirectlytoyour
vessel’s12Vdcpowersupply,orusingaPower
overEthernet(PoE)injector(refertothe4.4
Powerconnectionsectionfordetails).Ifyouare
connectingtheproducttoagSSeriesMFD,
thecameracanbesuppliedPoEbythedisplay,
providedthedisplayhasthenecessaryremaining
PoEallocation.RefertothegSSeriesinstallation
andoperationinstructionsfordetailsonPoE
allocation,andalsotothe4.4Powerconnection
section.
•Multiplecamerasystem:
YoucanuseaRaymarinenetworkswitchto
connectmultiplecamerastoasingleMFD.Each
camerarequiresaseparatepowersupply,unless
theswitchiscapableofprovidingPoE,orifthe
cameraisconnecteddirectlytoagSSeries
MFDsupplyingPoE.Refertothe4.5Network
connectionand4.4Powerconnectionsections
fordetails.
•PC/laptopsystem:
YoucanconnecttheproducttoaPCorlaptop
computer,directlyviathecomputer’sEthernet
connector,orindirectlyviaaRaymarinenetwork
switch.Refertothe4.5Networkconnection
sectionfordetails.WhenconnectedtoaPCor
laptopcomputer,youcanaccesstheproduct’s
built-inwebinterface.
18CAM200IP/CAM210IP
3.6Warningsandcautions
Important:Beforeproceeding,ensurethatyou
havereadandunderstoodthewarningsand
cautionsprovidedintheChapter1Important
informationsectionofthisdocument.
3.7Generallocationrequirements
Importantconsiderationswhenchoosingasuitable
locationforyourproduct.
Thisproductissuitableformountingbelowdecks.
Theproductshouldbemountedwhereitwillbe:
•protectedfromphysicaldamageandexcessive
vibration.
•wellventilatedandawayfromheatsources.
Whenchoosingalocationfortheproduct,
considerthefollowingpointstoensurereliableand
trouble-freeoperation:
•Access—theremustbesufcientspaceto
enablecableconnectionstotheproduct,avoiding
tightbendsinthecable.
•Diagnostics—theproductmustbemountedin
alocationwherethediagnosticsLEDiseasily
visible.
Note:Notallproductsincludeadiagnostics
LED.RefertotheChapter8Systemchecks
andtroubleshootingformoreinformation.
•Electricalinterference—theproductshouldbe
mountedfarenoughawayfromanyequipment
thatmaycauseinterferencesuchasmotors,
generatorsandradiotransmitters/receivers.
•Magneticcompass—refertotheCompass
safedistancesectioninthisdocumentforadvice
onmaintainingasuitabledistancebetweenthis
productandanycompassesonyourvessel.
•Power—tokeepcablerunstoaminimum,the
productmustbelocatedascloseaspossibleto
thevessel’sdcpowersupply.
•Mountingsurface—ensuretheproductis
adequatelysupportedonasecuresurface.Refer
totheweightinformationprovidedintheTechnical
specicationforthisproductandensurethatthe
intendedmountingsurfaceissuitableforbearing
theproductweight.DoNOTmountunitsorcut
holesinplaceswhichmaydamagethestructure
ofthevessel.
Compasssafedistance
Topreventpotentialinterferencewiththevessel's
magneticcompasses,ensureanadequatedistance
ismaintainedfromtheproduct.
Whenchoosingasuitablelocationfortheproduct
youshouldaimtomaintainthemaximumpossible
distancefromanycompasses.Typicallythisdistance
shouldbeatleast1m(3ft)inalldirections.However
forsomesmallervesselsitmaynotbepossibleto
locatetheproductthisfarawayfromacompass.In
thissituation,whenchoosingtheinstallationlocation
foryourproduct,ensurethatthecompassisnot
affectedbytheproductwhenitisinapoweredstate.
Planningtheinstallation
19
3.8Panandtilt
Thecamera’sbaseincludesa2–axismechanical
pantiltmechanism.
CAM200IP
90
o
360
o
D13086-1
CAM210IP
90
o
360
o
D13478-1
Thecamera’spanandtiltanglesshouldbeadjusted
totherequiredpositionduringinstallation.
Thecamera’spananglecanbeadjustedupto360°,
thecamera’stiltanglecanbeadjustedupto90°.
Note:Panandtiltangleadjustmentisa
mechanicalprocedure,performedbyphysically
adjustingthecamera’spositiononitsbase.
3.9Productdimensions
CAM200IP
D13087-2
88 mm (3.5 in.)
198.9 mm (7.8 in.)
127 mm (5 in.)
75.4 mm (3 in.)
238.7 mm (9.4 in.)
10 mm (0.39 in.)
CAM210IP
D13479-1
89 mm (3.5 in.)
174.0 mm (6.9 in.)
112.8 mm (4.4 in.)
67.0 mm (2.6 in.)
213.6 mm (8.4 in.)
20CAM200IP/CAM210IP
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
