2. Value
  3. CAT6 Shielded RJ45 Outdoor Waterproof Coupler
CAT6 Shielded RJ45 Outdoor Waterproof Coupler

Value CAT6 Shielded RJ45 Outdoor Waterproof Coupler, RJ45 Modular Coupler, Cat.6A (Class EA), STP, Outdoor/Industrial, black User manual

  • Hello! I have analysed the provided document and it looks like this is instruction manual for waterproof connector installation. The document describes a step-by-step process for assembling and installing a waterproof connector, including cable preparation, part assembly and sealing. I am ready to assist you with any questions you may have about this guide and the described waterproof device.
  • What components are included with the waterproof connector?
    What is the first step in installation?
    How to lock waterproof plugs on the cable?
1. Accessories 2 pcs End covers,
2 pcs Long tubes, 1 pc RJ45 Coupler,
2 pcs O-shape sealing rings,
2 pcs Waterproof sealing plugs.
Waterproof connector installation instructions
2. Pass the two cables through the end
covers and the long tubes respectively.
End cover
RJ45 Coupler
O-shape sealing ring
RJ45 plug
Long tube
Waterproof sealing plug
4. Screw the long tube tightly onto the
RJ45 coupler as guided in the menual.
3. Insert the patch cords into the both
ends of the RJ45 coupler.
5. Lock the two waterproof plugs on the cable,
then put them into the end of the long tube.
Note: The plug is engraved with the word
"waterproof" on one side outward.
6. Screw the end cover at both ends
onto the long tube. Finally to check
whether the waterproof plug is closely
matched with the cables.
/