Genius G12PS User manual

Brand: Genius

Model: G12PS

Type: User manual

Product : Gamepad

Model Name : Max Fire G12PS

Model Number : G12PS

Version Number : 01

Service Guide

----------------------------------------------------------------- KYE SYSTEMS CORP.

Service Guide

Contents

1. Revision record --------------------------------------------------3

2. Maintain Guide --------------------------------------------------4

2.1 Introduction --------------------------------------------------4

2.2 Necessary tools ----------------------------------------------4

2.3 Safety attention ----------------------------------------------4

3. How to handle defective returns -----------------------------5

3.1 Procedure -----------------------------------------------------5

3.2 Problem description -----------------------------------------6

3.3 Problem solve ------------------------------------------------7

4. Assemble & Disassemble -------------------------------------10

4.1 How to Assemble and Disassemble the pad surface

-------------------------------------------------------------------10

4.2 How to Assemble and Disassemble the PSB

------------11

4.3 How to Assemble and disassemble the Ministick

-----------------------------------------------------------------12

4.4 How to Assemble and Disassemble the Motors ----------13

4.5 How to Assemble and Disassemble the LED -------------14

5. Appendix 1. Part list ------------------------------------------15

6. Appendix 2. Disassemble drawing -------------------------16

----------------------------------------------------------------- KYE SYSTEMS CORP.

Service Guide

1. Revision Record

Date Version Name Approve

2003/5/15 1.0 Bam Niky

----------------------------------------------------------------- KYE SYSTEMS CORP.

Service Guide

2. Maintain Guide

2.1 Introduction

Please pay attention to this guide, and follow the information to

prevent resulting damage.

This maintain-guide is against hardware problems of this pad.

2.2 Necessary tools

2.3 Safety attention

When staying for long time, please check electric and power circuit.

Place it in flat surface and prevent it from vibration.

Don’t drop and jolt this pad.

Don’t remove this pad from your PS when it is using.

Keep this pad away wet and high temperature.

Screwdriver

Tweezers

Solder

Solder torch

Tin-Sucker

----------------------------------------------------------------- KYE SYSTEMS CORP.

Service Guide

3. How to handle defective returns

3.1 Procedure

Analyze possible

malfunction causes

Frame the solutions

and methods

Replace necessary

defective parts

Test all function to

check the pad is ok.

Return the pad to

customers

Received

Defective Pad

Test &Check

problem

Function NG

Function OK

Function NG

----------------------------------------------------------------- KYE SYSTEMS CORP.

Service Guide

3.2 Problem Description

Item Problem Description

3.2.1 Ministick’s

function wrong

1) Can’t control ministick correctly and

completely.

2) Ministick is no work.

3.2.2 Motors are

incorrect

1) One or both of two motors is no work.

2) Any Motors’ rotation is incorrect.

3.2.3 LED 1) LED isn’t bright

2) LED is twinkling

----------------------------------------------------------------- KYE SYSTEMS CORP.

Service Guide

3.3 Problem solve

3.3.1

Ministick’s function wrong

Problem

Analyze the

problem

Judge the problem

causes

Solution

Ministick wrong

Mechanics

Electronics

1. Incorrect using causes

the mechanics of

ministick broken.

2. Out of life

1. Using for too long

time causes the value of

VR instable.

2. Out of life

Replace the

Ministick

Replace the

Ministick

----------------------------------------------------------------- KYE SYSTEMS CORP.

Service Guide

3.3.2 Motors are incorrect

Problem

Analyze the

problem

Judge the problem

causes

Solution

Any motor is no rotation

Motor’s Mechanics

Electronics

1. Out of life

1. The cord between

Motor and PCB is fall

off.

Replace the

Motor

Re-solder the

Cord

----------------------------------------------------------------- KYE SYSTEMS CORP.

Service Guide

3.3.3 LED

Problem

Analyze the

problem

Judge the problem

causes

Solution

LED isn’t bright

Mechanics

Electronics

1. Out of life

1. The cord between LED

and PCB is fall off.

Replace the LED

Re-solder the

cord

----------------------------------------------------------------- KYE SYSTEMS CORP.

Service Guide

4. Assemble & Disassemble

4.1 How to Assemble and Disassemble the pad surface

Procedure Graphics

1. Disassemble

1) Turn over the pad

2) Put the pad on a flat

3) Rotate screws

4) Separate pad’s covers

2. Assemble

1) Compose all parts according to

disassemble drawing

2) Lock all screws firmly

Attention:

When assembling the pad

surface, please put a cloth to

prevent it from rub.

----------------------------------------------------------------- KYE SYSTEMS CORP.

Service Guide

4.2 How to Assemble and Disassemble the PSB

Procedure Graphics

1. Disassemble

1) Rotate the screws on the

ministicks’ PSB

2. Assemble

1) Lock the screws

Attention:

When rotating PSB’s screws,

please take care other parts

connected to PSB.

----------------------------------------------------------------- KYE SYSTEMS CORP.

Service Guide

4.3 How to Replace the Ministick

Procedure Graphics

1. Remove

1) Suck the point of weld of the

Resonator by Tin-Sucker

2) Remove the defective Ministick

by Tweezers

2. Replace

1) Insert the same spec, complete

Ministick on the correct hole

3. Solder

1) Solder the Ministick

2) Check all points of solder is ok

----------------------------------------------------------------- KYE SYSTEMS CORP.

Service Guide

4.4 How to Replace the Motor

Procedure Graphics

1. Remove

1) Suck the point of weld of the

Motor’s cord by Tin-Sucker

2) Remove the defective Motor by

Tweezers

2. Replace

1) Change a all right Motor

2) Solder the cord with the new

Motor

3. Assemble

1) Put the new Motor into the seat

3) Check all points of solder is ok

----------------------------------------------------------------- KYE SYSTEMS CORP.

Service Guide

4.5 How to Replace the LED

Procedure Graphics

1. Remove

1) Suck the point of weld of the

LED by Tin-Sucker

2) Remove the defective LED by

Tweezers

2. Replace

1) Insert the same spec, complete

LED on the right hole

3. Solder

1) Solder the LED

2) Check all points of solder is ok

Attention:

When insert the LED, please

take care of it’s height.

----------------------------------------------------------------- KYE SYSTEMS CORP.

Service Guide

5. Appendix 1. Part List

Item Part No. Name Quantity Station Spec.

1 1450311R LED 1 D11 Red LED

2 151G1211 Motor1 1 Big Motor 7.5V, Big motor

3 151G1221 Motor2 1 Small Motor 7.5V, Small motor

4 126G1211 Ministick 2 JL.JR B10K, 45degree

5 22503603 Cord 2 R1/R2/L1/L2 3PIN, 60mm, 2MM

6 22508403 Cord 1 8PIN 8PIN, 40mm, 2MM

----------------------------------------------------------------- KYE SYSTEMS CORP.

Service Guide

6. Appendix 2. Disassemble Drawing

412G081D

414G123D

241G1231

427G081D

241G1211

420G121

401G121D

414G124D

24153011

214G1221

241G1221

4093571D

214G1231

414G082D

214G1211

151G1211

401G082D

Genius G12PS User manual

Genius G12PS User manual

Related papers

Other documents