USBDeviceSupportandThroughputs Supportslow-speedUSB1.1(1.5Mbps) Yes
Supportsfull-speedUSB1.1(upto12Mbps) Yes
Supportshigh-speedUSB2.0(480Mbps) Yes
Range 100M/330ft
Power 24V/1AACpowerAdapter(provided)
USBHubSupport Anysinglechaincanincludeupto4USBhubsplus1B-300-USB2-CATX
USBHostSupport EHCI(USB2.0)andOHCI/UHCI(USB1.1)
MaximumCurrentAvailabletoUSBDeviceat
RemoteExtender
500mA
LOCALEXTENDER
USBConnector 1xUSBTypeBReceptacle
LinkConnector 1xRJ45
Dimensions 85mmx57mmx28mm(3.35”x2.25”x1.10”)
REMOTEEXTENDER
USBConnector 1xUSBTypeAReceptacle
LinkConnector 1xRJ45
Dimensions 85mmx57mmx28mm(3.35”x2.25”x1.10”)
ENVIRONMENTAL
OperatingTemperatureRange 32°Fto122°F(0°Cto50°C)
StorageTemperatureRange -4°Fto158°F(-20°Cto70°C)
OperatingHumidity 20%to80%relativehumidity,non-condensing
StorageHumidity 10%to90%relativehumidity,non-condensing
COMPLIANCE
EMC FCC(ClassA),IC(ClassA)
Immunity CECriteriaA
Environmental RoHS2(CE)
Safety FlammabilityV-0
SUPPORT
Warrranty 1-year
Specications:
©2014Binary™
140428-1700
1-Year Limited Warranty
ThisBinary™ProducthasaOne-YearLimitedWarranty.Thiswarrantyincludespartsandlaborrepairsonall
componentsfoundtobedefectiveinmaterialorworkmanshipundernormalconditionsofuse.Thiswarrantyshall
notapplytoproductsthathavebeenabused,modied,ordisassembled.Productstoberepairedunderthiswarranty
mustbereturnedtoSnapAVoradesignatedservicecenterwithpriornoticationandanassignedreturnauthorization
number(RA).
1
year
Problem Cause Solution
USBdeviceisattachedbutnotfunctioning. • TheUSBdevicerequiresdriversthatwerenot
installed.
• TheUSBdevicedoesnotsupportUSBhubs.
• TheUSBdevicehasmalfunctioned.
• InstalltherequiredUSBdevicedriveronthe
computeroperatingsystempriortoattaching
theUSBdeviceintotheremoteextender.
PleaseseeyourUSBdevicemanufacturer’s
websitefordetails.
• IntheUniversalSerialBuscontrollerssection
ofDeviceManager,checkthattheUSB
devicehasenumerated.
• ContactTechnicalSupportforassistance.
USBdeviceisattachedbutnotfunctioning. • Overcurrentconditionhasoccuredbecause
theUSBdevicehasdrawnmorecurrent
thancanbesuppliedperUSBspecication
(500mA).Theoperatingsystemmaygener-
ateastatusbubbleindicatinganissue.
• Powercycleremoteextender.Wait30
secondsandplugpowerbackintotheunit.
• Ifovercurrentcontinuestooccur,either:(a)the
USBdevicemayusemorepowerthanthe
USBspecication,or(b)theUSBdevicemay
bedamaged.
• ContactTechnicalSupportforassistance.
TheLEDonthelocalandremoteextendersblink
intermittently.
• TheCat5ecableconnectingthelocal
extenderandremoteextenderisfaulty.
• Firmwaremismatchbetweenthelocaland
remoteextenders
• EnsuretheCat5ecableisofdecentquality.
• Useadifferentlocalandremoteextenderpair
whichhavethesamermwarerevision.
• Upgradethelocalandremoteextenderrm-
ware;contactTechnicalSupport.
TheLEDonthelocalandremoteextenderisoff. • Theremoteextenderisnotreceivingpower.
• Thelocalextenderisnotreceivingpower.
• Thelinkcableismalfunctioning.
• TheB-300-USB2-CATXismalfunctioning.
• Conrmthehostcomputerisonandproviding
powertothelocalextender.
• Ensurepoweradapterisproperlyconnected
tothelocalorremoteextender.Notboth.
• EnsuretheCat5ecablingbetweenthelocal
andremoteextendersisproperlyinstalled.
• ContactTechnicalSupportforassistance.
Troubleshooting: