Binary B-300-USB1-CATX Quick start guide

Brand: Binary

Model: B-300-USB1-CATX

Type: Quick start guide

Binary B-300-USB1-CATX is a USB 1.1 extender which allows to extend USB 1.1 signals up to 85M/280ft without the need for external power. The device is fully transparent to the connected devices, requires no software drivers, and is compatible with all major operating systems. The extender is easy to install and use, simply connect the CATX extension link cable to the Link ports (RJ45) on the local extender and remote extender. Then, connect the local extender to the computer, and connect the USB device to the remote extender. The extender supports various USB devices, including low-speed (1.

B-300-USB1-CATX USB 1.1 Over Single CAT5e/6/7 Extender

How to Connect:

Requirements:

• USB1.1or2.0compatiblecomputerwithaUSBcompliant

operatingsystem

• USB1.1or2.0compatibledevice(s)

• SolidcoreCAT5eorCAT6/7,UTP/STP

Connect the local extender to the computer

Attach the USB device to the remote extender

Computer

Local Extender Remote Extender

Place units where desired, and connect th

e CATX

(solid core) extension link cable to the Link ports

(RJ45) on the local extender and remote extender.

(CAT

X cable not included)

PROBLEM CAUSE SOLUTION

TheUSBdevicedoes

notoperatecorrectly.

• TheUSBdeviceismalfunctioning.

• Thecomputerdoesnotrecognize

theUSBdevice.

• Theapplicationsoftwareforthe

deviceisnotoperating.

• Theextenderismalfunctioning.

1. Un-installandre-installthedriverfortheUSB

device.

2. UpdatethedriverfortheUSBdevice.

3. DirectlyconnecttheUSBdevicetotheHostto

verifytheUSBdeviceoperatescorrectly.

4. ContactTechnicalSupport.

TheUSBdeviceisde-

tectedasan“Unknown

Device”intheoperating

system.

• TheUSBdevice’stimingisoutside

oftheUSB1.1specication.

• Theextenderismalfunctioning.

1. Connecttheremoteextendertothelocalex-

tenderusingapatchcable.

2. Unplugthelocalextenderfromthehostand

wait15seconds.Thenplugthelocalextender

backintothehost.

3. ContactTechnicalSupport.

TheUSBdeviceisde-

tectedasusingtoomuch

powerintheoperating

system.

• TheUSBdeviceneedsmorepower

thantheextendercansupport.

• Thehostisnotprovidingenough

powertotheextender.

1. ConnectthelocalextendertoadifferentUSB

portonthehost.

2. ConnectaselfpoweredUSBhubbetweenthe

remoteextenderandtheUSBdevice.

Troubleshooting:

Product Features: Included:

• ExtendsUSB1.1signalsupto85M/280ft*

• TransparentUSBextension

• Noexternalpowerrequired

• Trueplugandplay,nosoftwaredriversrequired

• Workswithallmajoroperatingsystems

• LocalExtender

• RemoteExtender

• QuickStartGuide

Important Notes:

• *TheB-300USB1.1modelenablesuserstoextend

USBdevicesupto40M/131ft.Extensiondistancesupto

85M/280ftmaybeachievablewithlow-speedHIDdevices

suchaskeyboardsandmice.

• Itisstronglyrecommendedthatthewiringpattern:TIA-

568Bbeusedforextensionofmedia.

• ExtensionlengthisreducedforeachUSBhubaddedto

thesystem.Thereisa13.2M/43ftreductioninextension

distanceforeachUSBhubaddedtothesystem.This

includeshubsaddedonthelocalextenderorremote

extenderside.

• Theextendersystemcannotbedaisychainedtogether

withadditionalextendersystems.Asystemcanhaveonly

onelocalextenderandoneremoteextender.

Quick Start Guide

USBDeviceSupportandThroughputs

Supportslow-speedUSB1.1(1.5Mbps) Yes

Supportsfull-speedUSB1.1(upto12

Mbps)

Yes

Supportshigh-speedUSB2.0(480

Mbps)

Yes(onlyupto12Mbps)

Rangeforhigh-speeddevices(such

assmartboards)

40M/131ft

Rangeforlow-speeddevices

85M/280ft

PoweredbyUSB

Yes

USBHubSupport

Anysinglechaincanincludeupto3USBhubsdependingonwhichUSBdevices

arebeingextended.Extensiondistancewillbereducedwitheachhubaddedtothe

system.

USBHostSupport

EHCI(USB2.0)andOHCI/UHCI(USB1.1)

MaximumCurrentAvailabletoUSB

DeviceatRemoteExtender

400mAwhenlocalextenderissuppliedwith700mA

LOCALEXTENDER

USBConnector 1xUSBTypeAPlug

LinkConnector 1xRJ45

Dimensions 85mmx40mmx22mm(3.34”x1.57”x0.87”)

REMOTEEXTENDER

USBConnector 1xUSBTypeAReceptacle

LinkConnector 1xRJ45

Dimensions 85mmx40mmx22mm(3.34”x1.57”x0.87”)

ENVIRONMENTAL

OperatingTemperatureRange 32°Fto122°F(0°Cto50°C)

StorageTemperatureRange -4°Fto158°F(-20°Cto70°C)

OperatingHumidity 20%to80%relativehumidity,non-condensing

StorageHumidity 10%to90%relativehumidity,non-condensing

COMPLIANCE

EMC FCC(ClassB),CE(ClassB)

Environmental RoHS2(CE)

Safety CPSIA,FlammabilityV-1

SUPPORT

Warrranty 1-year

Specications:

©2019Binary™

140429-0900

Contacting Technical Support:

Phone:(866)838-5052

E-mail:support@snapav.com

1-Year Limited Warranty

ThisBinary™ProducthasaOne-YearLimitedWarranty.Thiswarrantyincludespartsandlaborrepairsonall

componentsfoundtobedefectiveinmaterialorworkmanshipundernormalconditionsofuse.Thiswarrantyshallnot

applytoproductswhichhavebeenabused,modiedordisassembled.Productstoberepairedunderthiswarranty

mustbereturnedtoSnapAVoradesignatedservicecenterwithpriornoticationandanassignedreturnauthorization

number(RA).

year

Binary B-300-USB1-CATX Quick start guide

Binary B-300-USB1-CATX Quick start guide

Binary B-300-USB1-CATX Quick start guide

Related papers

Other documents