Reacher C10 User manual

Brand: Reacher

Model: C10

Category: Table clocks

Type: User manual

Reacher C10 is a compact and versatile digital alarm clock with user-friendly features. It allows you to set two separate alarms with various customization options such as weekdays, weekends, or all-day alarms. The clock also includes a snooze function for extra 9 minutes of sleep. The brightness of the display can be adjusted using the dimmer function. Note that the ringtone cannot be directly set and, unfortunately, you cannot set an alarm for a specific day of the week.

Insert 3“AAA" batteries (Not Included) to continue working normally in case of power

interruption. Under the battery backup, the clock has all functions except for USB

charging your electronic device.

Note:

1. In battery-operated mode, the battery will drain fast (lasting just 1-2 days). The clock

will gradually dim, flash, and no sound in low battery. So please plugin for daily use.

2. Once the batteries are removed and with an interruption of power, the TIME and

ALARM need to be reset when the power comes back.

3. When the battery power runs out and AC power outage occurs, the screen display

will be dimmed or be blank, at this time you need to insert battery/AC power.

ALARM 1 and ALARM 2 are set in the same way.Press the"/" button to tum

on alarm 1/2.

Long press the“ ”button button for 2 seconds to completely turn off alarm 1/2,

and the alarm icon will disappear on the screen.

Slider the rolling wheel on the left side to adjust or turn off the brightness.

Then the alarm won't go off the next day.

Day of Week

AM/PM Indicator

(Only in 12Hr)

Snooze Indicator

Alarm 1/2 ON

Dimmer

Power Input

2 USB Charging Ports

Alarm 1 ON/OFF

Adjust the Time/

Alarm/ Alarm Format/

Ringtone

Time Set

Snooze

12/24Hr

Adjust Volume

Alarm 2 ON/OFF

The alarm setting steps as follows:

1. Alarm Hour

2. Alarm Minutes

3. Alarm Mode (All-7-day / Weekday / Weekend)

4. Alarm Ringtone

5. Alarm Volume

1.Turn Off Alarm Daily & SNOOZE

Alarm ON/OFF

Getting Started

Front Panel

Dimmer

Back Panel

2.Completely turn off the alarm

When the alarm goes off,

you have 3 options can

stop the alarm for the day

and the alarm still goes

off the next day.

Press the "" button to stop the alarm for the

day.

Press the “Snooze” button for extra 9 minutes of

sleep, the indicator“Zz” will flash on the display. The

alarm can snooze 7 times. After the last snooze, the

alarm will go silent.

Without any action, the alarm will ring for 1 hour.

1. How to set the ringtone?

The right steps are as follows:

Turn on the ALARM 1/2 set alarm hour alarm minute alarm mode

ringtone

NoteThe ringtone cannot be set directly by the "SET+/SET-" button.

2. Can I set an alarm for a specific day?

NO. You can't set the alarm goes off on a single day of the week, For example, it can't

set the alarm to go off only on Thursdays. You can set the Mon-Fri alarm mode so it will

go off on Mon-Fri.

3. The alarm does not go off at the set time?

1) Check whether the " " indicator lit on.

2) Check whether AM and PM are set right-In 12Hr.

3) Check whether the alarm mode is set right.

Question & Answers

10 11

Alarm ON

Alarm OFF

Features

Getting Started

Battery Back-up Function

Quick Getting Started

Setting the Time

Setting the Weekday/Weekend/All-7-Day Alarm

Alarm ON/OFF

Dimmer

Restore Factory Setting

Question & Answer

Support

Warranty

Front Panel

Back Panel

Reacher C10 User manual

Brand: Reacher

Model: C10

Category: Table clocks

Type: User manual

Download PDF

report

Reacher C10 User manual

Reacher C10 User manual

Other documents