Oneida Air Systems VSRSBU000 Installation guide

Bona Universal 8” or 10” Retrot

VSRSBU000

Instructions:

Retrot

Handle

Remove stock stack by loosening the two bolts at the

bottom of the stack.

Replace with OAS stack using supplied 8 mil / 20 mil

bolts. Use silicone on mating surfaces to insure a

good seal.

Sander cyclone is ready to be attached.

Appearance and color of Vortex subject to change.

Improved collection at the oor.

Machine stays cleaner, less maintenance.

Reduced dust jam-ups at the drum. Sanding belts last longer.

Eliminates cloth dust bag.

Clean operation, no airborne dust.

OAS stack replaces stock stack in order to allow clearance for cyclone to

rotate from side to side.