2. Oneida Air Systems
  3. VSRSBU000

Oneida Air Systems VSRSBU000 Installation guide

  • Hello! I've reviewed the document for the Retrofit Kit VSRSBU000 from Oneida Air Systems. This document details the features of the kit, which include improved dust collection and a cleaner operation. It also describes how the OAS stack replaces the stock stack. Feel free to ask me any questions you might have about the document or the product.
  • What is the purpose of the OAS stack?
    What kind of bolts are used to install OAS stack?
    What should I use to ensure a good seal when installing the OAS stack?
Bona Universal 8” or 10” Retrot
VSRSBU000
Instructions:
Retrot
Handle
Remove stock stack by loosening the two bolts at the
bottom of the stack.
Replace with OAS stack using supplied 8 mil / 20 mil
bolts. Use silicone on mating surfaces to insure a
good seal.
Sander cyclone is ready to be attached.
Appearance and color of Vortex subject to change.
Improved collection at the oor.
Machine stays cleaner, less maintenance.
Reduced dust jam-ups at the drum. Sanding belts last longer.
Eliminates cloth dust bag.
Clean operation, no airborne dust.
OAS stack replaces stock stack in order to allow clearance for cyclone to
rotate from side to side.
/