Z-Wave z-wave ZC10 In-Wall Smart Motion Dimmer User manual

Z-Wave
Brand
Z-Wave
Model
z-wave ZC10 In-Wall Smart Motion Dimmer
Type
User manual

This manual is also suitable for

Z-Wave z-wave ZC10 In-Wall Smart Motion Dimmer is a smart home automation device that controls lighting. It can be controlled remotely via a Z-Wave network and features motion and no-motion detection capabilities. The device supports firmware updates, allowing for new features and improvements to be added in the future. It requires a neutral wire for installation and supports Z-Wave beaming technology for extended range and reliability. Additionally, it offers enhanced security with Z-Wave network security features.

Z-Wave z-wave ZC10 In-Wall Smart Motion Dimmer is a smart home automation device that controls lighting. It can be controlled remotely via a Z-Wave network and features motion and no-motion detection capabilities. The device supports firmware updates, allowing for new features and improvements to be added in the future. It requires a neutral wire for installation and supports Z-Wave beaming technology for extended range and reliability. Additionally, it offers enhanced security with Z-Wave network security features.

Z-Wave Protocol Implementation Conformance Statement
In-Wall Smart Motion Dimmer
General Information
Product Identifier: 26933
Brand Name: Jasco Products Company
Product Version: HW: 255 FW: 5.50
Z-Wave Certification #: ZC10-16125342
Product Features
Firmware Updatable Updatable by Consumer by RF
Neutral Wire Required Yes
Sensors Motion/No Motion (Binary)
Z-Wave Product Information
Supports Z-Wave Beaming Technology? Yes
Supports Z-Wave Network Security? Yes
Supports Z-Wave AES-128 Security S0? No
Supports Security S2? No
SmartStart Compatible? No
Z-Wave Technical Information
Z-Wave Frequency: U.S. / Canada / Mexico
Z-Wave Product ID: 0x3034
Z-Wave Product Type: 0x494D
Z-Wave Hardware Platform: ZM5101
Z-Wave Development Kit Version: 6.51.08
Z-Wave Library Type: Enhanced 232 Slave
Z-Wave Device Type / Role Type: Light Dimmer Switch / Always On Slave
Copyright © 2012-2021 Z-Wave Alliance. All Rights Reserved. All Logos property of respective rights' holders, no claim intended. Generated @ August 24, 2021
Z-Wave Protocol Implementation Conformance Statement
(Continued)
In-Wall Smart Motion Dimmer
Association Group Information
Group # / Max Description
Nodes
1 / 5 Z-Wave Plus Lifeline, Multi-Level Report
2 / 5 Supports Basic Set and is controlled by pressing On/Off button with local load
3 / 5 Supports Basic Set and is controlled by pressing On/Off button with local load
Supported Command Classes (18):
Association Group Info Association V2
Basic Configuration
CRC16 Encapsulation Device Reset Locally
Firmware Update Meta-Data V2 Manufacturer Specific V2
Multi-Channel Association V3 Multi-Channel V4
Notification V4 Powerlevel
Scene Activation Scene Actuator Conf
Switch All Switch Multilevel V2
Version V2 Z-Wave Plus Info V2
Controlled Command Classes (1):
Basic
Copyright © 2012-2021 Z-Wave Alliance. All Rights Reserved. All Logos property of respective rights' holders, no claim intended. Generated @ August 24, 2021
  • Page 1 1
  • Page 2 2

Z-Wave z-wave ZC10 In-Wall Smart Motion Dimmer User manual

Z-Wave
Brand
Z-Wave
Model
z-wave ZC10 In-Wall Smart Motion Dimmer
Type
User manual
This manual is also suitable for

Z-Wave z-wave ZC10 In-Wall Smart Motion Dimmer is a smart home automation device that controls lighting. It can be controlled remotely via a Z-Wave network and features motion and no-motion detection capabilities. The device supports firmware updates, allowing for new features and improvements to be added in the future. It requires a neutral wire for installation and supports Z-Wave beaming technology for extended range and reliability. Additionally, it offers enhanced security with Z-Wave network security features.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents