Electrolux ECS9181G User manual

Brand: Electrolux

Model: ECS9181G

Type: User manual

Electrolux ECS9181G is a range hood designed to effectively remove cooking fumes, smoke, and grease from your kitchen. With its powerful motor, it can efficiently handle the demands of everyday cooking, keeping your kitchen air clean and fresh. The range hood also features a self-clean function that automatically activates after 15 hours of operation, making it easy to maintain. Additionally, the ECS9181G comes equipped with LED lights to illuminate your cooking area while you work.

ECS6181G

ECS9181G

Fig.4

600/900

420

480350

278

276

ECS6181G

ECS9181G

Chimney

Oil cup

Aluminum pipe

Hood mounting bracket

5Mounting screws(ST 5X 50MM)

5Drywall Anchors

DamperDamper

set

1Duct fixing tape

1User manual

Fig.3

460mm

Min.830

Range hood

mounting points

Fig.5

(Fig.5)

Install the wall bracket with screws to the wall as

marked(Fig.6) .

Hang the hood on the wall bracket(Fig.7).

Fig.6

Fig.7

Fig.8

(Fig.8)

tapes

450

400

600

Self-clean

Self-clean instruction

Assemble the flue cover onto the hood body make sure

it on the correct position.

Fig.9

(Fig.9)

Glass

●Glass should be cleaned every week in order to

keep the shiny

Grease filter

The grease filter should be cleaned frequently (

every two months of operation, or more frequently

for heavy use). Use a warm detergent solution.

Grease filter is washable

Remove the grease filter by unscrewing 2pcs

screws. This will disengage the filter from the hood

. Tilt the filter downward and remove(Fig.10)

Wash the filter , taking care not to bend them.

Allow them to be dried before refitting.

To install the grease filter , push filter into position

and release . Fix the glass panel to the two hinges

and refix one screw .

Note: To replace the filter, please let the hood on

suction mode before cutting off the electrical

supplier and don't open the glass panel by hand.

●

Replacing the lamp

Unfixed screws on the switch cover below front glass and

dismantle the switch cover with screwdriver

Replace the damaged LED, only use LED DC 12V,4W Max

Note:

WARNING: .

1. Always switch off the electrical supply before carrying

out any operation on the appliance.

2. Only a qualified and trained service technician can

undertake the work of bulbs replacement and servicing.

We recommend only using lamps of the same

specification as the ones being replaced.

Fig.10

Changing the lamp

This product is equipped with self-clean technology.

The self-clean function will be automatically triggered

after the motor works for 15hours.

User also can tap the self-clean button to trigger the

self-clean function.

The red indicator will start glowing during the cleaning

process.

The time period for Self-clean is 10 to 15 minutes. The

product can be used during self-clean.

Philippines

Consumer Care Center Toll Free:

1-800-10-845-CARE(2273)

Consumer Care Hotline:(+63 2)845-CARE(2273)

Electrolux Philippines,lnc.

Unit B 12F Cyber Sigma Bldg, Lawton Avenue,

McKinley West,Taguig, Philippines 1634

Trunkline:+63 2 737-4757

Website:www.electrolux.com.ph

Email:wecare@electrolux.com

Vietnam

Consumer Care Center Toll Free

1800-58-88-99

Tel: (+84 28) 39105465

Electrolux Vietnam Ltd.

Unit 1&2, 10F Sofic Tower, #10 Mai Chi Tho

Street,

Thu Thiem Ward, Thu Duc City, Ho Chi

Minh City, Vietnam

Electrolux ECS9181G User manual

Electrolux ECS9181G User manual

Electrolux ECS9181G User manual

Related papers