Electrolux ECT9520G User manual

Type
User manual

This manual is also suitable for

Electrolux ECT9520G is a kitchen range hood designed to remove smoke, grease, and odors from the air during cooking. It features a powerful motor with three fan speeds, allowing you to adjust the extraction rate to your cooking needs. The hood is equipped with two grease filters that can be easily removed and cleaned, ensuring optimal performance and hygiene. Additionally, the ECT9520G comes with a built-in light to provide illumination while cooking.

Electrolux ECT9520G is a kitchen range hood designed to remove smoke, grease, and odors from the air during cooking. It features a powerful motor with three fan speeds, allowing you to adjust the extraction rate to your cooking needs. The hood is equipped with two grease filters that can be easily removed and cleaned, ensuring optimal performance and hygiene. Additionally, the ECT9520G comes with a built-in light to provide illumination while cooking.

ECT9520G
ECT6520G
ECT9740S
ECT6740S
ECT9623X
c
8.a
9
5
8.a
9
6
8.a
8.b
5
8.a
9
6
(1 pc for ECT9520G & ECT6520G
2 pcs for ECT6740S
3 pcs for ECT9740S &ECT9623X)
ECT9520G
ECT6520G
ECT9740S
ECT6740S
ECT9623X
tape
1/2/3
14
13 Sponge strip
1
ECT9520G
ECT6520G
ECT9740S
ECT6740S
ECT9623X
14
14
(As accessory for ECT9623X)
(As accessory for ECT9623X)
cc
8
8
4.8 X 40
6
306
281
435-815
435
50
454
600/900
435-815
51
281
306
450
600/900
8.b
200mm
240mm
230mm
4.Using a 9mm drill bit, enlarge the pilot holes and insert the
plastic wall anchors (BB) into the wall along the line as
reference point. Insert screws and leave a 5mm(Fig.8) gap
between the wall and the back of the screw head to slide the
range hood into place. Ensure the screws and anchors (AA
and BB) are parallel with the horizontal line.
5
5.Hook the hood body(A) onto the screws( AA and BB)
mounted onto the wall and securely tighten the screws(
AA and BB) to secure the hood body(A) on the wall. Peel
off the backing and stick sponge strip to the front side
of the fan housing as shown(Fig.9)
6.Install two additional hood body mounting screws
(AA) into the auxiliary mounting holes to secure the
hood body (A) in place.
7
815mm
268mm
547mm
Auxiliary mounting points
Range hood mounting points
58mm
AA&BB
Fig.6
(Fig.13)
Fig.9
Fig.10 Fig.11
(Fig.13)
(Fig.12)
(Fig.12).
(Fig.14).
(Fig.6).
7
77
tape
Fig.7
12)
Sponge strip
7mm
.
ECT9623X
ECT9520G ECT6520G
ECT9740S ECT6740S
Fig.12 Fig.13
Fig.14
Fig.15
the
(Fig.15)
8
9.
Metal grease filter
The purpose of the grease filters is to absorb grease particles
which form during cooking and it must always be used, either in
the external extraction or internal re-circulation function.
Attention: the metal grease filters must be removed and
washed, either by hand or in the dishwasher, every four weeks.
to reset (except ECT9623X).
will damage the hood.
Philippines
Consumer Care Center Toll Free:
1-800-10-845-CARE(2273)
Consumer Care Hotline:(+63 2)845-CARE(2273)
Electrolux Philippines,lnc.
Unit B 12F Cyber Sigma Bldg, Lawton Avenue,
McKinley West,Taguig, Philippines 1634
Trunkline:+63 2 737-4757
Website:www.electrolux.com.ph
Vietnam
Consumer Care Center Toll Free
1800-58-88-99
Tel: (+84 28) 39105465
Electrolux Vietnam Ltd.
Unit 1&2, 10F Sofic Tower, #10 Mai Chi Tho
Street,
Thu Thiem Ward, Thu Duc City, Ho Chi
Minh City, Vietnam
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Electrolux ECT9520G User manual

Type
User manual
This manual is also suitable for

Electrolux ECT9520G is a kitchen range hood designed to remove smoke, grease, and odors from the air during cooking. It features a powerful motor with three fan speeds, allowing you to adjust the extraction rate to your cooking needs. The hood is equipped with two grease filters that can be easily removed and cleaned, ensuring optimal performance and hygiene. Additionally, the ECT9520G comes with a built-in light to provide illumination while cooking.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI