Beghelli BoxLED® Installation guide

Brand: Beghelli

Model: BoxLED®

Type: Installation guide

Beghelli Mexico

Av. del Marqués #70 Int. 4 Parque Industrial

Bernardo Quintana C.P. 76246 El Marqués,

Querétaro. México

P: +52 442-221-6439 / F: +52 442-221-6215

www.beghellimexico.com

BOXLED

BL736 LED Series

INSTALLATION INSTRUCTIONS

EACH MODEL NUMBER CONSIST OF THE FOLLOWING:

SERIES / WATTAGE / LED COLOR TEMPERATURE / INPUT

SERIES: BL736 LED

WATTAGE: 150W and 230W

LED COLOR

TEMPERATURE :

WT40 (4000K)

INPUT: 120V to 277V

When using electrical equipment, basic safety precautions should always be followed including:

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

1. Do not let power cord touch hot surfaces.

2. Do not mount near gas or electric heaters.

3. Always mount equipment in a location that is not subjected to tampering by unauthorized

personnel.

4. The use of accessory equipment not recommended by Beghelli may cause an unsafe

condition and will void the warranty.

5. Do not use this equipment other than its intended purpose.

6. Servicing of this equipment should be performed by qualified service personnel.

FIRST MAKE SURE POWER IS TURNED OFF!

1. Install each mounting system as indicated.

2. Connect wire leads from main AC following wire labels.

“THIS PRODUCT MUST BE INSTALLED BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF

THE PRODUCT AND THE HAZARDS INVOLVED, IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE”

KEEP THESE INSTALLATION INSTRUCTIONS!

LED HIGHBAY

Stainless Steel

Hinges

Aluminum

Housing

Frosted Glass

Lens

Beghelli USA

3810 Executive Way

Miramar, Florida 33025 USA

P: 800 726 4316 / P: 954 442 6600

F: 954 442 6677

www.beghelliusa.com

HOT.............(BLACK)

NEUTRAL...(WHITE)

GROUND....(GREEN)

IMPORTANT SAFEGUARDS

MOUNTING

BRACKET

SURFACE MOUNT ASSEMBLY

SURFACE MOUNT KIT

SURFACE MOUNT

BRACKET

INSTALLATION INSTRUCTIONS

LED HIGHBAY

FASTEN SCREWS TO CEILING

(PROVIDED BY CONTRACTOR)

SAFETY

SCREWS

MOUNTING

SCREWS

1. Fasten and secure SURFACE MOUNT BRACKET with appropriate

screws (provided by contractor).

2. Fasten MOUNTING BRACKET to fixture as indicated.

3. Mount and secure assembly to SURFACE MOUNT BRACKET

using SAFETY SCREWS.

MOUNTING

BRACKET

SURFACE MOUNT

BRACKET

ACCESSORIES

(provided by Beghelli)

(2) SAFETY SCREWS

(2) MOUNTING SCREWS

(2) LOCKWASHERS

45 Degree Swivel Maximum Canopy

SWIVEL CANOPY KIT (1/2” IP STEM)

INSTALLATION INSTRUCTIONS

LED HIGHBAY

(see completed assembly view on next page)

ASSEMBLY VIEW

J-BOX (provided by contractor)

CROSSBAR

GROUND WIRE

SCREW

CANOPY w/ side hole

1/2” IP TAPPED

CROSSBAR

MOUNTING

BRACKET

1/2” IP STEM

1/2” IP TAPPED HALF BALL

1/2” IP

LOCKNUT

1/2” IP

LOCKNUT

45 Degree Swivel Maximum Canopy

SWIVEL CANOPY KIT (1/2” IP STEM)

INSTALLATION INSTRUCTIONS

LED HIGHBAY

COMPLETED ASSEMBLY VIEW

HOOK

(provided by Beghelli)

CHAIN MOUNT ASSEMBLY

INSTALLATION INSTRUCTIONS

LED HIGHBAY

CHAIN

(provided by Beghelli)

J - BOX / J - BOX COVER / BUSHING

(provided by contractor)

POWER CORD

(provided by Beghelli)

Beghelli BoxLED® Installation guide

Beghelli BoxLED® Installation guide

Beghelli BoxLED® Installation guide

Related papers

Other documents