LG 50PA4500 Owner's manual

Category
LED TVs
Type
Owner's manual
www.lg.com
OWNER’S MANUAL
PLASMA TV
Please read this manual carefully before operating the
set and retain it for future reference.
PA45**
PA49**
PA55**
PA65**
2
ENG
ENGLISH
LICENSES
ENG
ENGLISH
LICENSES
Supported licenses may differ by model. For more information about licenses, visit
www.lg.com.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby Laboratories.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays
DivX video. Visit divx.com for more information and software tools to convert your
files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered
in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section in your device setup menu. Go to
vod.divx.com for more information on how to complete your registration.
“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”
“DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation
or its subsidiaries and are used under license.”
Covered by one or more of the following U.S. patents :
7,295,673; 7,460,668; 7,515,710; 7,519,274
NOTE
Image shown may differ from your TV.
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
3
ENGENGLISH
LICENSES
4
ENG
ENGLISH
TABLE OF CONTENTS
TABLE OF CONTENTS
2 LICENSES
6 INSTALLATION PROCEDURE
6 ASSEMBLING AND PREPARING
6 Unpacking
9 Separate purchase
9 Parts and buttons
12 Lifting and moving the TV
13 Setting up the TV
13 - Attaching the stand
15 - Mounting on a table
16 - Mounting on a wall
17 - Tidying cables
18 REMOTE CONTROL
20 WATCHING TV
20 Connecting an antenna
20 Turning the TV on for the first time
21 Watching TV
21 Managing programmes
21 - Automatically setting up programme
23 - Cable DTV Setting (In Cable mode only)
23 - Manually setting up programme (In
digital mode)
24 - Manually setting up programme (In
analogue mode)
25 - Editing your programme list
27 - CI [Common interface] Information
28 - Selecting the programme list
29 EPG (Electronic Programme Guide) (In
digital mode)
29 - Switch on/off EPG
29 - Select a programme
30 - NOW/NEXT Guide Mode
30 - 8 Day Guide Mode
30 - Date Change Mode
30 - Extended Description Box
30 - Remind Setting Mode
31 - Schedule List Mode
31 Using additional options
31 - Adjusting aspect ratio
33 - Changing AV modes
33 - Using the input list
34 - Locking the buttons on the TV (Child Lock)
35 Using the quick menu
36 Using the customer support
36 - Testing Software Update
37 - Testing the Picture / Sound
37 - Using Signal Test
37 - Using the product or service information
38 PENTOUCH
38 Using Pentouch
39 - Step of using the Pentouch program
39 - System Requirements
39 - Installing the Pentouch Program
40 - Removing the Pentouch Program
40 - Pairing between Touch Pen and Dongle
44 - Using the Pentouch Function
44 - Display Resolution Settings for Pentouch
46 Checking the Pentouch Functions
47 - Using Toolbar
48 - Using Sketchbook
50 - Using Photo Editor
52 - Using Family Diary
52 - Using Gallery
53 - Using Internet
54 - Using the My Office function
55 NETWORK SETTING
55 - Connecting to a wired network
56 - Network Status
57 ENTERTAINMENT
57 - Connecting USB storage devices
58 - Browsing files
59 - Viewing movies
62 - Viewing photos
64 - Listening to music
66 - DivX® VOD Guide
5
ENGENGLISH
TABLE OF CONTENTS
67 CUSTOMIZING TV SETTING
67 Accessing main menus
68 Customizing settings
68 - PICTURE settings
73 - AUDIO settings
76 - SETUP settings
77 - TIME settings
78 - LOCK settings
79 - OPTION settings
81 - NETWORK Settings
82 MAKING CONNECTIONS
83 Connection overview
84 Connecting to a HD receiver, DVD, or
VCR player
84 - HDMI Connection
85 - DVI to HDMI Connection
86 - Component Connection
87 - Euro Scart connection
88 - Composite Connection
89 Connecting to a PC
89 - HDMI Connection, DVI to HDMI Con-
nection or RGB Connection
91 Connecting to an Audio System
91 - Digital Optical Audio Connection
92 Connecting to a USB
92 Connecting to a CI Module
93 SIMPLINK connection
93 - Activating the SIMPLINK feature
94 TELETEXT
94 Switch On/Off
94 Simple Text
94 - Page selection
94 Top Text
94 - Block / Group / Page Selection
94 - Direct Page Selection
95 Fastext
95 - Page selection
95 Special Teletext Function
96 DIGITAL TELETEXT
96 Teletext within digital service
96 Teletext in digital service
97 MAINTENANCE
97 Cleaning your TV
97 - Screen and frame
97 - Cabinet and stand
97 - Power cord
98 Preventing “Image burn” or “Burn-in” on
your TV screen
99 TROUBLESHOOTING
101SPECIFICATIONS
104 IR CODES
105EXTERNAL CONTROL DEVICE
SETUP
105 RS-232C Setup
105 Type of connector; D-Sub 9-Pin Male
105 RS-232C Configurations
106 Communication Parameters
106 Command reference list
107 Transmission / Receiving Protocol
112 OPEN SOURCE LICENSE
112 Open source software notice
6
ENG
ENGLISH
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
Remote control,
Batteries (AAA)(See p.18)
Owners manual,
CD manual
Cable Holder(See p.17)
x 3 x 4
M5 x 16 M4 x 30
Screw for assembly
(See p.13, See p.14)
Power Cord Holder(See p.17) Power Cord
Protection Cover(See p.14) Ferrite core
(Depending on model)
Polishing cloth
(Depending on model)
Gently wipe the spots on the
cabinet with the polishing cloth.
Stand Body(See p.13) Stand Base(See p.13)
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and item.
Only 42/50PA45**, 50/60PA55**, 50/60PA65**
INSTALLATION PROCEDURE
1 Open the package and make sure all the accessories are included.
2 Attach the stand to the TV set.
3 Connect an external device to the TV set.
7
ENGENGLISH
ASSEMBLING AND PREPARING
Only 42/50PA49**
Remote control,
Batteries (AAA)(See p.18)
Owners manual,
CD manual
Pentouch Caution Guidelines
x 3 x 4
M5 x 16 M4 x 30
Screw for assembly
(See p.13, See p.14)
Power Cord Holder(See p.17) D-sub 15 pin signal cable
Protection Cover(See p.14) Ferrite core
(Depending on model)
Power Cord
x 2
Cable Holder(See p.17) Eye-bolt , Wall bracket
(See p.15)
Polishing cloth
(Depending on model)
Gently wipe the spots on the
cabinet with the polishing cloth.
Home
Charging Cable(See p.43) Tip(See p.43)
The number of tip may differ
depending on the model.
Touch Pen (AN-TP300)
The number of touch pen
may differ depending on the
model.
(See p.41)
Touch Pen Dongle
(AN-TD200)(See p.41)
Cradle(See p.41) Stand Base (See p.13)
Stand Body (See p.13)
8
ENG
ENGLISH
ASSEMBLING AND PREPARING
The items supplied with your product may vary depending on the model.
Product specifications or contents of this manual may be changed without prior notice due to
upgrade of product functions.
How to use the ferrite core
1 Use the ferrite core to reduce the electromagnetic interference in the PC audio cable.
Wind the PC audio cable on the ferrite core thrice. Place the ferrite core close to the TV.
2 Use the ferrite core to reduce the electromagnetic interference in the power cable.
Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and a wall plug.
[to an External device]
[Figure 1]
[to the TV]
10 mm(+ / - 5 mm)
3 Use the ferrite core to reduce the electromagnetic interference in the component Y, Pb, Pr, L,
R cable.
Wind the
component Y, Pb, Pr, L, R cable
on the ferrite core once.
Place the ferrite core close to the TV.
[Cross Section of
Ferrite Core]
(Gray)
[to an External device]
[Figure 3]
[to the TV]
10 mm(+ / - 5 mm)
[Cross Section of
Ferrite Core]
(Black)
[to a wall plug]
[to the TV]
[Figure 2]
[Cross Section of
Ferrite Core]
(Black)
- If there is one ferrite core, follow as shown in Figure 1.
- If there are three ferrite cores, follow as shown in Figures 1 and 2.
- If there are four ferrite cores, follow as shown in Figures 1, 2 and 3.
- If there is LAN port, additionally follow as shown in Figure 4.
NOTE
4 Use the ferrite core to reduce the electromagnetic interference in the LAN cable. Wind the
LAN cable thrice on the ferrite core. Place the ferrite core close to the TV and an External device.
A (Gray) B (Gray)
[Cross Section of
Ferrite Core]
[to the TV]
[to an External
device]
B A A
[Figure 4]
For an optimal connection, HDMI cables and USB de-
vices should have bezels less than 10 mm thick and
18 mm width. Use an extension cable that supports
USB 2.0 if the USB cable or USB memory stick does
not fit into your TV’s USB port.
*A 10 mm
*B
18 mm
9
ENGENGLISH
ASSEMBLING AND PREPARING
Parts and buttons
TV can be placed in standby mode in order to reduce the power consumption. And TV should be
turned off if it will not be watched for some time, as this will reduce energy consumption.
The energy consumed during use can be significantly reduced if the level of brightness of the
picture is reduced, and this will reduce the overall running cost.
NOTE
Do not step on the glass stand or subject it to any impact. It may break, causing possible injury
from fragments of glass, or the TV may fall.
Do not drag the TV. The floor or the product may be damaged.
Some models have a thin film attached on to the screen and this must not be removed.
CAUTION
Do not use any pirated items to ensure the safety and product life span.
Any damages or injuries by using pirated items are not covered by the warranty.
CAUTION
Separate purchase
Separate purchase items can be changed or modified for quality improvement without any notification.
Contact your dealer for buying these items.
This device only works with compatible LG Plasma TV.
AN-TP300
Touch Pen, Cradle
The number of touch pen and
cradle may differ depending on
the model.
Compatibility
42/50PA45** 50/60PA55** 50/60PA65** 42/50PA49**
AN-TP300
Touch Pen, Cradle
10
ENG
ENGLISH
ASSEMBLING AND PREPARING
Screen
Connection panel
(See p.82)
Speakers
1 Intelligent sensor - Adjusts the image quality corresponding to the surrounding environment.
Button Description
Turns the power on or off
Changes the input source
Accesses the main menus, or saves your input and exits the menus
Selects the highlighted menu option or confirms an input
Adjusts the volume level
Scrolls through the saved programmes
Remote control and
intelligent
1
sensors
Power Indicator
Red – In Standby
mode
Off – TV turns on
Image shown may differ from your TV.
Menu Description
1
PCMCIA Card Slot
2
USB input
3
HDMI IN 3
4
HDMI / DVI IN 2
1
2
4
3
Only
42/50PA49**,
50/60PA65**
Only
42/50PA45**,
50/60PA55**
(Only LAN PORT
model)
Only 42/50PA45**-ZA~F, 42/50PA49**-ZA~F, 50/60PA55**-ZA~F, 50/60PA65**-ZA~F
11
ENGENGLISH
ASSEMBLING AND PREPARING
Screen
Connection panel
(See p.82)
Speakers
1 Intelligent sensor - Adjusts the image quality corresponding to the surrounding environment.
Button Description
Turns the power on or off
Changes the input source
Accesses the main menus, or saves your input and exits the menus
Selects the highlighted menu option or confirms an input
Adjusts the volume level
Scrolls through the saved programmes
Remote control and
intelligent
1
sensors
Power Indicator
Red – In Standby
mode
Off – TV turns on
Image shown may differ from your TV.
Menu Description
1
PCMCIA Card Slot
2
USB input
3
HDMI IN 3
4
HDMI IN 2
1
2
4
3
Only
42/50PA49**,
50/60PA65**
Only
42/50PA45**,
50/60PA55**
(Only LAN PORT
model)
Only 42/50PA45**-ZG~M, 42/50PA49**-ZG~M, 50/60PA55**-ZG~M, 50/60PA65**-ZG~M
12
ENG
ENGLISH
ASSEMBLING AND PREPARING
Lifting and moving the TV
When moving or lifting the TV, read the following to
prevent the TV from being scratched or damaged
and for safe transportation regardless of its type
and size.
It is recommended to move the TV in the box
or packing material that the TV originally came
in.
Before moving or lifting the TV, disconnect the
power cord and all cables.
When holding the TV, the screen should face
away from you to prevent the screen from
scratches.
Hold the top and bottom of the TV frame firmly.
Make sure not to hold the transparent part,
speaker, or speaker grill area.
When transporting a large TV, there should be
at least 2 people.
When transporting the TV by hand, hold the
TV as shown in the following illustration.
When transporting the TV, do not expose the
TV to jolts or excessive vibration.
When transporting the TV, keep the TV
upright, never turn the TV on its side or tilt
towards the left or right.
Avoid touching the screen at all times, as
this may result in damage on the screen
or some of the pixels used to create
images.
CAUTION
13
ENGENGLISH
ASSEMBLING AND PREPARING
Setting up the TV
Image shown may differ from your TV.
Attaching the stand
Put your TV on a pedestal stand and mount the TV on a table or wall.
If you are not mounting the TV to a wall, use the following instructions to attach the stand.
1 2
3
Front
M5 x 16
3 EA
Only 42/50PA45**, 42/50PA49**, 50/60PA55**, 50/60PA65**
When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
CAUTION
Tighten the screws firmly to prevent the TV
from tilting forward. Do not over tighten.
CAUTION
Stand Base
Stand Body
M4 x 30
4 EA
14
ENG
ENGLISH
ASSEMBLING AND PREPARING
CAUTION
Tighten the screws firmly to prevent the TV
from tilting forward. Do not over tighten.
M4 x 30
4 EA
1
2
To detach the stand,
Protection Cover
3
When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
CAUTION
This will protect the opening from accu-
mulating dust and dirt.
When installing the wall mounting brack-
et, use the Protection cover.
NOTE
M4 x 30
2 EA
15
ENGENGLISH
ASSEMBLING AND PREPARING
Mounting on a table
Image shown may differ from your TV.
1
Lift and tilt the TV into its upright position on a table.
- Leave a 10 cm (minimum) space from the wall for
proper ventilation.
2
Connect the power cord to a wall outlet.
10 cm
10 cm
10 cm
10 cm
Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
CAUTION
Swivel 20 degrees to the left or right and
adjust the angle of the TV to suit your
view.
NOTE
When adjusting the angle of the product,
watch out for your fingers.
- Personal injury may occur if hands or fin-
gers are pinched. If the product is tilted
too much, it may fall, causing damage or
injury.
CAUTION
Securing the TV to a wall (Depending on model)
Image shown may differ from your TV.
1
Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2
Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
3
Connect the eye-bolts and wall brackets tightly
with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.
Use a platform or cabinet that is strong
and large enough to support the TV
securely.
NOTE
Make sure that children do not climb on
or hang on the TV.
CAUTION
16
ENG
ENGLISH
ASSEMBLING AND PREPARING
Mounting on a wall
Attach a wall mount bracket at the rear of the TV
carefully and install the wall mount bracket on a
solid wall perpendicular to the floor. When you
attach the TV to other building materials, please
contact qualified personnel.
LG recommends that wall mounting be performed
by a qualified professional installer.
10 cm
10 cm
10 cm
10 cm
Make sure to use screws and wall mount
bracket that meet the VESA standard. Standard
dimensions for the wall mount kits are described in
the following table.
Separate purchase(Wall Mounting Bracket)
Model 42/50PA45**
42/50PA49**
50PA55**
50PA65**
60PA55**
60PA65**
VESA (A x B) 400 x 400 600 x 400
Standard screw M6 M8
Number of screws 4 4
Wall mount bracket PSW400B
PSW600B
PSW420BX PSW620BX
Disconnect the power first, and then move
or install the TV. Otherwise electric shock
may occur.
If you install the TV on a ceiling or slanted
wall, it may fall and result in injury. Use
an authorized LG wall mount bracket
and contact the local dealer or qualified
personnel.
Do not over tighten the screws as this may
cause damage to the TV and void your
warranty.
Use the screws and wall mount bracket that
meet the VESA standard. Any damages
or injuries by misuse or using an improper
accessory are not covered by the warranty.
CAUTION
Use the screws that are listed on the
VESA standard screw specifications.
The wall mount kit includes an installation
manual and necessary parts.
The length of screws may differ
depending on the wall mount. Make sure
to use the proper length.
For more information, refer to the manual
supplied with the wall mount bracket.
NOTE
A
B
17
ENGENGLISH
ASSEMBLING AND PREPARING
Tidying cables
Image shown may differ from your TV.
Do not move the TV by holding the Cable
Holder & Power Cord Holder, as the
Cable holders may break, and injuries
and damage to the TV may occur.
CAUTION
1 Install the Power Cord Holder and Power
Cord. It will help prevent the power cable from
being removed by accident.
2 Gather and bind the cables with the Cable
Holder.
Power Cord Holder
Cable Holder
18
ENG
ENGLISH
REMOTE CONTROL
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control.
Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching
and ends to the label inside the compartment, and close the battery cover. Be
sure to point the remote control to the remote control sensor on the TV.
To remove the batteries, perform the installation actions in reverse.
Do not mix old and new batteries, as this may damage the remote control.
CAUTION
Image shown may differ from your TV.
(POWER)
Turns the TV on or off.
ENERGY SAVING (See p.68)
Adjusts the brightness of the screen to reduce energy consumption.
TV/RAD
Selects Radio, TV and DTV programme.
GUIDE
Shows programme guide.
INFO (See p.29)
Views the information of the current programme and screen.
RATIO (See p.31)
Resizes an image.
INPUT (See p.33)
Changes the input source; Turns the TV on.
Number buttons
Enters numbers.
LIST (See p.28)
Accesses the saved programme list.
Q.VIEW
Returns to the previously viewed programme.
or
19
ENGENGLISH
REMOTE CONTROL
SETTINGS
Accesses the main menus, or saves your input and exit the menus.
Q. MENU (See p.35)
Accesses the quick menus.
Navigation buttons (up/down/left/right)
Scrolls through menus or options.
OK
Selects menus or options and confirms your input.
Returns to the previous level.
EXIT
Clears all on-screen displays and return to TV viewing.
+ -
Adjusts the volume level.
FAV (See p.28)
Accesses your favourite programme list.
AD
Switches the Audio Description On or Off.
MUTE
Mutes all sounds.
P
∧∨
(P + -)
Scrolls through the saved programmes.
PAGE
Moves to the previous or next screen.
Coloured buttons
These buttons are used for teletext (on TELETEXT models only),
Programme edit.
Control buttons(
, , , , )
Controls the MY MEDIA menus, or the SIMPLINK compatible devices
(USB,SIMPLINK).
SUBTITLE
Recalls your preferred subtitle in digital mode.
1
TELETEXT BUTTONS (See p.94)
These buttons are used for teletext.
For further details, see the ‘Teletext’ section.
INFO (See p.29)
Views the information of the current programme and screen.
GUIDE
Shows programme guide.
SIMPLINK (See p.93) (Depending on model)
Accesses the AV devices connected with the HDMI cable
through HDMI-CEC.
Opens the SIMPLINK menu.
AV MODE (See p.33)(Depending on model)
Selects an AV mode
1
1
20
ENG
ENGLISH
WATCHING TV
WATCHING TV
For optimum picture quality, adjust
antenna direction.
In poor signal areas, to achieve better
picture quality it may be necessary to
install a signal amplifier to the antenna.
If the image quality is poor with an
antenna connected, aim the antenna to
the correct direction.
An antenna cable and converter are not
supplied.
NOTE
Turning the TV on for the first
time
When you turn the TV on for the first time, the
Initial setting screen appears. Select a language
and customize the basic settings.
1
Connect the power cord to a power outlet.
2
In Standby mode, press (POWER) to turn the TV
on.
The Initial setting screen appears if you turn
the TV on for the first time.
You can also access Factory Reset by
accessing OPTION in the main menus.
NOTE
Wall Antenna
Socket
Connecting an antenna
Connect an antenna to watch TV while referring to
the following.
To prevent damage do not connect to the mains
outlet until all connections are made between the
devices.
Connect the TV to a wall antenna socket with an
RF cable (75 Ω).
3
Follow the on-screen instructions to customize
your TV settings according to your preferences.
Selects a language to display.
Selects Home Use for the
home environment.
Selects a country to display.
(Depending on model)
Language
Mode Setting
Country
Set Password
Time Zone
Network Setting
Auto Tuning
Selects the time zone and
daylight saving.
(When Russia is selected for
Country)
(If there is LAN port) selects
Network Setting to display.
Scans and saves
available programmes
automatically.
Set the password.
(When France or Italy is
selected for Country)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136

LG 50PA4500 Owner's manual

Category
LED TVs
Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI