Altronix EBRIDGE1CR Datasheet

EBRIDGE1CR
Altronix
Brand
Altronix
Model
EBRIDGE1CR
Category
Network extenders
Type
Datasheet

This manual is also suitable for

Altronix EBRIDGE1CR, a single-port Ethernet receiver, enables fast 10/100Base-T Ethernet digital communication over existing coax cable. It's ideal for upgrading analog CCTV systems to IP cameras, extending network links in industrial settings, and transmitting composite video signals simultaneously.

Altronix EBRIDGE1CR, a single-port Ethernet receiver, enables fast 10/100Base-T Ethernet digital communication over existing coax cable. It's ideal for upgrading analog CCTV systems to IP cameras, extending network links in industrial settings, and transmitting composite video signals simultaneously.

The eBridge1CRT - IP over Coax transceiver and receiver kit is designed to enable fast
10/100Base-T Ethernet digital communication over coax cable. These plug and play
units facilitate system upgrades from analog to IP cameras/devices utilizing existing
legacy Coax and eliminating the costs and labor associated with installing new network
cabling. In addition data transmission is extended to 2,000’ (over five times the 100m/328’
Ethernet maximum length), eliminating the need for repeaters. eBridge units will transmit
Composite Video Signal with Ethernet data simultaneously.
Input:
• 12VDCto24VDCClass2powersupply(polaritynot
observed)or16VACto24VACClass2plug-in
transformer.
Power Consumption:
• 12VDC/275mA,24VDC/110mA,
16VAC/375mA,24VAC/200mA.
Compliant:
• Incorporates*sloc
TM
(Security Link over Coax)
technology.
Ethernet:
• Connectivity:RJ45,auto-crossover.
• Wiretype:4-pairCat-5orhigherstructuredcable.
• Distance:upto328ft.(100m).
• Speed:10/100BaseT, half/full duplex, auto negotiation.
• Throughputisratedtopass25mbpsofdataat
distancesupto1500ft.Withproperheadend
equipment, multiple Megapixel cameras can be used.
Coax:
• Distance:upto1,500ft.
• Connectivity:BNC,RG-59/Uorsimilar.
LED Indicators:
• BlueLED-Coaxlinkconnection.
• YellowandGreenLED(RJ45)IPLinkstatus,
10/100Base-T/active.
• GreenLED-Power.
Environmental:
• OperatingTemperature:
14ºFto122ºF(---10ºCto+50ºC).
• StorageTemperature:
--22ºto158ºF(---30ºto+70ºC)Storage.
• Humidity:20to85%,non-condensing.
Electrical:
• BTU/Hr.:
- VDC:1.69-4.46BTU/Hr.
Electrical (cont’d):
• BTU/Hr.:
- VAC:2.46-3.07BTU/Hr.
Accessories:
• Compositevideocables(included)-enables
simultaneous composite video signal over the
same Coax.
• Two(2)powerconnectors.
Applications:
• RetrofitdigitalIPcamerasinananalogCCTV
installation.
• WorkswithMegapixel,HD720,HD1080andVGA
(SD)cameras.
• ExtendNetworklinkdistanceinanindustrial
environment.
• UpgradedeployedCCTVCoaxtoadigitalnetwork
for Retail, Casinos, Airports, Schools, Hospitals, etc.
• Enablessimultaneoustransmissionofcompositeand
digital IP video.
Mechanical:
• Lightweightmoldedfiberglassreinforcedpolyester
enclosure is corrosion resistant and does not contain
halogens.
• Dimensions(WxLxHapprox.):
2.5”(63.5mm)x3.8”(96.52mm)x1”(25.4mm)
• Productweight(approx.):4oz.(0.11 kg).
• Shippingweight(approx.):7oz.(0.17kg).
Additional eBridge models:
• eBridge1CR: Single port ethernet receiver
(use with eBridge transceiver).
• eBridge1CT: Single port ethernet transceiver
(use with eBridge receivers).
• eBridge1CRT: Single port ethernet receiver and
transceiver kit.
• eBridge4CR:Four(4)portethernetreceiver.
• eBridge16CR: Sixteen (16) port ethernet receiver.
eBridge1CRT - IP over Coax Kit
Rev.DSeBridge1CRT_04042013
Specifications
Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com
Overview
Agency Approvals
European Conformity
UL/CULListedforInformation
TechnologyEquipment(UL60950-1).
C-TickApproved-Z1409
eBridge1CR
and eBridge1CT
*slocisaregisteredtrademarkofIntersilCorporation.
  • Page 1 1

Altronix EBRIDGE1CR Datasheet

EBRIDGE1CR
Altronix
Brand
Altronix
Model
EBRIDGE1CR
Category
Network extenders
Type
Datasheet
This manual is also suitable for

Altronix EBRIDGE1CR, a single-port Ethernet receiver, enables fast 10/100Base-T Ethernet digital communication over existing coax cable. It's ideal for upgrading analog CCTV systems to IP cameras, extending network links in industrial settings, and transmitting composite video signals simultaneously.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents