Bergen 180 hangingrail set
Dimensions
Width - 86.9cm
Depth - 2.2cm
Height - 1.5cm
Important – Please read these instructions fully before starting assembly
Assembly Instructions- Please keep for future reference 247/7174
Issue 1 - 12/06/14
DR825043
If you need help or have damaged or missing parts, call the Customer Helpline:
Argos = 0345 6400800
Assembly Instructions
Step
Insert the hanging rails
Mount hanging rail support
A (4x), then fasten with
one screw B (4x).
Put the hanging rails C in
their supports A.(2x)
A
A
A
B
B
B
C
C
correctly identify the screws
Tools required
(medium & large)
Scissors
B
Hanger rail support, gray x 4
K
FK1217
Screw x 4 (4x12.5mm)
FK1309
Hanging rail x 2
PM1828
(869mm)
C
A
1/2
Please check you have all the fittings listed below
Components - Fittings
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
Phillips screwdriveer
/
