Philips DCB146/12 Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the Philips DCB146/12 Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
DCB146
Register your product and get support at
www.philips.com/welcome
Quick Start Guide
User Manual
Remote Control
Main unit
User Manual
Quick Start Guide
2 x Loudspeaker boxes
4 x iPod adaptors
Quick Start Guide
DCB146_12_QSG_EN_V1.1.indd 1 2010-6-10 16:16:43
PULL T O OPEN
A
Connect
a
b
B
Play a disc
1 Press DISC to select the disc source.
2 Lift the CD door on the top of the system
to open the CD compartment.
3 Insert a disc with the printed side facing up
and press down the CD door to close the
CD compartment.
4 Press to start playback.
1 Fortherightspeaker,ndthesocketson
the main unit marked ‘RIGHT’.
2 Insert the red wire to the red (+) socket.
3 Insert the black wire into the black (-)
socket.
4 Fortheleftspeaker,ndthesocketsonthe
main unit marked ‘LEFT’.
5 Repeat steps 2-3.
1 Connect the power adaptor to the wall
outlet.
DCB146_12_QSG_EN_V1.1.indd 2 2010-6-10 16:16:44
C
D
E
Play from iPod
Tune to DAB stations
Program and tune to FM stations
1 Press SOURCE to select DAB to start an
automatic search of available DAB stations.
2 Press / to change the DAB stations.
3 Press OKtoconrmaselection.
4 Toperformascan,pressbrieySCAN.
5 To access setup options, press MENU
then use the navigation control buttons to
select.
1 Select TUNER source.
2 Press SCAN for more than two seconds to
program all available stations (FM only).
3 Press / to select the desired preset
station.
Tip
Detailed playback features and additional
functions are described in the accompanied user
manual.
MIC
PUSH TO OPEN
DOCK FOR iPOD
RO SYSTEM DCB146
SOURCE
DOCK
STANDBY
-
ON
CD/CD
-
R/CD
-
RW COMPATIBLE
PRESET
iR
VOL
VOL
TUNING
1 Select a dock adaptor (supplied) that
matches your iPod type.
2 Press PUSH TO OPEN to open the dock
on the main unit.
3 Snap the suitable dock adaptor into the
dock on the main unit.
4 Plug your iPod into the dock adaptor.
5 Press iPod on the remote control to select
iPod source.
The connected iPod plays automatically. »
DCB146_12_QSG_EN_V1.1.indd 3 2010-6-10 16:16:45
© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.
DCB146_12_QSG_V1.1
F
Set clock
1 Press and hold CLOCK/DISPLAY on the
remote control for 2 seconds.
2 Press PROG repeatedly to select 12 hour
or 24 hour format.
3 Press CLOCK/DISPLAYtoconrmthe
selection.
4 Press / to set the hour.
5 Press CLOCK/DISPLAYtoconrmthe
hour setting.
6 Press / to set the minute.
7 Press CLOCK/DISPLAYtoconrmthe
setting.
DCB146_12_QSG_EN_V1.1.indd 4 2010-6-10 16:16:46
/