Page is loading ...
PLEASE KEEP THIS EASY START GUIDE FOR FUTURE USE.
ATB3600
Blender
EASY START GUIDE
PACKAGE CONTENTS
ASSEMBLING YOUR BLENDER
STEP 1
Insert the Ring (G) into the
inner rim of the Blender Blades
(H).
STEP 2
Insert the Blender Blades (with
the Ring) into the Jug Base (I).
STEP 3
Mount the Jug (F) on top of
the Jug Base (I), then turn
the Jug Base clockwise until
it securely holds the Jug in
place.
STEP 4
Once assembled, mount
the Jug Base into the Main
Body (B). Press it downwards
until the Jug Base is securely
locked into the main body.
STEP 5
Place the Jug Cover (E) on
top of the Jug, then insert its
Inner Cap (D) in a clockwise
manner until it locks into the
Jug Cover.
Blender Easy Start Guide User Manual Warranty PolicyGRINDER
A
B
D
E
F
G
H
I
C
A. Assembled Jug
B. Main Body
C. Speed Control
Knob
D. Inner Cap
E. Jug Cover
F. Jug
G. Ring
H. Blender
Blades
I. Jug Base
PLEASE KEEP THIS EASY START GUIDE FOR FUTURE USE.
USING THE BLENDER
TIPS BEFORE USING YOUR BLENDER
• It is STRONGLY ADVISED to ensure that you have read all provided safety guides and
operating instructions in the USER MANUAL BEFORE PROCEEDING.
• Before use, please check if the power voltage of your Blender correctly corresponds to your
home’s power supply.
• Should damages be found on the appliance, its power cord and/or its other components
– do not use the appliance and immediately bring it to the Aztech Service Center for repair
or replacement.
• Do not, in any kind of manner, disassemble, dismantle, and/or perform appliance repair on
your own and/or replace its components using non-Aztech approved components.
• Ensure to thoroughly clean and rinse all parts of the blender (except the main body) before
using the Blender for the rst time.
• Ensure that all components and/or parts (e.g. Blender Blades, Jug Cover, etc.) are all
securely and correctly locked into place before use.
STEP 1
Open the Jug cover and add in the ingredients that you want to blend into the Jug.
STEP 2
Securely cover the Jug with the Jug Cover and insert the inner cap (if removed) in a clockwise
manner into the Jug Cover to completely seal the Jug.
NOTE: You may opt to not use the inner cap if the ingredients you are about to blend are hot.
STEP 3
Select the preferred function or speed using the Speed Control Knob.
SPEED / FUNCTION SETTINGS
1 For soft ingredients and/or mixtures (e.g. banana, watermelon, etc).
2 For slightly hard ingredients (e.g. cabbages, celery, apples etc).
Pulse For extra hard ingredients (e.g. nuts, ice, coffee beans etc). The Pulse function, however,
requires you to turn the knob to the Pulse function continuously.
STEP 4
Turn the Speed Control Knob to 0 (OFF) and unplug it from the power outlet.
USING THE GRINDER ATTACHMENT
Your Blender comes with an optional Grinder attachment. This is best used for grinding harder
ingredients (e.g. walnuts, coffee beans, etc). To maximize grinding results, use this attachment
with the Pulse Function. Simply replace the Jug with the Grinder and you’re ready to go!
/