Accent Strip RGB SPECIFICATIONS:

LED: 3W LED

Working Position: Any safe working position

Power Input Voltage: 90~240V AC 50/60Hz (AC 12V, 1000mA)

Power Consumption: 8W

Beam Angle: 12 Degree

Weight: .5lbs./ .26Kgs.

Dimensions: 9.75”(L) x .4”(W) x .07”(H)

250 x 10 x 2mm

the unit has arrived intact. In the case damage has been found or parts are missing, please contact our toll free

customer support number for further instructions. Do not return this unit to your retailer/dealer without rst

contacting customer support.

Included in the carton should be 4x 9.75” self-adhesive strips with RGB LEDs, 1x Control Box, 3x 44” extension

cables, and 1x AC Adapter. Make sure that everything is accounted for after opening.

Introduction: The Accent Strip RGB is a very thin, LED-circuit-strip-tape with nine bright RGB LEDs. It can be

mounted to almost any clean surface using the provided adhesive tape. The Accent Strip RGB can be used in

various indoor applications; at home, in the office, a retail environment or any various compact space. With the

use of the easy-to-use control box users can select between 7 color and 3 different programs; Color Mixing,

Static Color, or Color Cycle. Do not connect more then 4 Accent Strips.

Static Color - In this program you can select 1 of the 7 colors to remain static (On). Only one color can be

selected at a time. Every push of the button will move to the next color. When you reach the last color, which is

white, the next push of the button will move you to the next program.

Color Cycle - In this program the Accent Strip will cycle through the 7 different colors.

Caution!

No user serviceable parts inside do not attempt repairs. In the event your Accent

Strip RGB should fail, contact American DJ. Do not return the Accent Strip to your retailer/

dealer, please contact American DJ.

Customer Support: Crystal Bright is part of the American DJ Group of Companines. Crystal Bright pro-

vides a toll free customer support line, to provide set up help and to answer any question should you encoun-

ter problems during your set up or initial operation. You may also visit us on the web at www.americandj.com

you must provide a copy of your proof of purchase invoice. Please contact American DJ customer

support for a R.A. number.

CONNECTIING THE ACCENT STRIPS: Connecting the Accent Strips is really easy. The Accent

Strips can be connected directly to each other or if you want to spread the strips out for longer runs

you can use the provided extension cables. Follow the instructions below to connect using the ex-

tension cables.

You can can either connect the Accent Strip diretly up to the controller or use one of the extensions.

If you choose to use an extension rather then connecting the Accent Strip directly to the controller

make sure the arrows line up and are facing each other. Please see picture above.

When making the connection to the Accent Strip, follow the arrows located on the connector. With