Western Isolation Module Adapter Kit (16-Pin) #69859 Installation guide
- Type
- Installation guide
69859
A DIVISION OF DOUGLAS DYNAMICS, LLC
69859 Adapter Kit
November 15, 2014
Lit. No. 41814, Rev. 00
INSTALLATION INSTRUCTIONS
1. Install the plug-in harness according to the
instructions supplied with the harness kit.
2. Connect the adapter to the vehicle headlamp
assembly and matching connector removed from
the vehicle headlamp assembly.
3. If the isolation module will be installed on
the driver's side, follow the diagram (69858 on
driver's side).
If the isolation module will be installed on the
passenger's side, reverse the positions of the
adapters (69946 on driver's side).
4. Connect the adapter to the plug-in harness
assembly, matching connectors.
5. Following the plug-in harness installation
instructions, splice wires:
69858 Adapter
• Splice the brown Park wire to the plug-in
harness green Park wire.
• Splice the green Turn wire to the plug-in
harness green Turn wire.
69946 Adapter
• Splice the pink DRL wire to the plug-in harness
pink wire.
• Splice the blue Turn wire to the plug-in harness
blue Turn wire.
69858
69946
69859 ADAPTER KIT
Connector from Vehicle
Headlamp Assembly
Connector from Vehicle
Headlamp Assembly
From Plug-In
Harness 69887
(Blue Wires)
From Plug-In
Harness 69887
(Green Wires)
Plug-In Harness from 69889 Kit
To
Vehicle
Headlamp
Assembly
To
Vehicle
Headlamp
Assembly
(PINK) DRL
(GREEN) Turn
(BROWN) Park
(GREEN) Turn
(GREEN) Park
(GREEN) Turn
(PINK) DRL
(BLUE) Turn
69859
Lit. No. 41814, Rev. 00 2 November 15, 2014
The company reserves the right under its product improvement policy to change construction or design details and furnish equipment when
so altered without reference to illustrations or specications used. This equipment manufacturer or the vehicle manufacturer may require or
recommend optional equipment for snow removal. Do not exceed vehicle ratings with a snowplow. The company offers a limited warranty for
all snowplows and accessories. See separately printed page for this important information.
Printed in U.S.A.
-
1
-
2
Western Isolation Module Adapter Kit (16-Pin) #69859 Installation guide
- Type
- Installation guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Western 3-Port Isolation Module Harness Kit #69889 Parts List & Installation Instructions
-
-
-
-
-
-
-
-
-
