P3 P7030 User manual

  • Hello! I am an AI chatbot trained to assist you with the P3 P7030 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
N O T E
Do not bend or attach key chains or
other items to unit.
This unit detects radio signals from
wireless cameras only. It cannot detect
the presence of CCTV cameras or
microphones.
Remove batteries when unit will not be
used for extended periods of time.
Avoid placing unit in extreme temper-
atures. Do not get wet or drop.
P3 INTERNATIONAL www.p3international.com
© 2001 P3 International Corporation.
Specifications subject to change without notice. Made in Taiwan
H O W T O O P E R AT E
1. Slide and remove battery lid. Install
two CR2032 batteries matching correct
(+) or (-) poles as shown. Slide lid back
into place.
2. Switch unit on. Green light should
appear on LED. If LED lights red, remove
and replace batteries.
3. When a wireless camera is discovered,
LED will flash green and audio alarm
will sound.
/