N O T E
Do not bend or attach key chains or
other items to unit.
This unit detects radio signals from
wireless cameras only. It cannot detect
the presence of CCTV cameras or
microphones.
Remove batteries when unit will not be
used for extended periods of time.
Avoid placing unit in extreme temper-
atures. Do not get wet or drop.
P3 INTERNATIONAL • www.p3international.com
© 2001 P3 International Corporation.
Specifications subject to change without notice. Made in Taiwan
H O W T O O P E R AT E
1. Slide and remove battery lid. Install
two CR2032 batteries matching correct
(+) or (-) poles as shown. Slide lid back
into place.
2. Switch unit on. Green light should
appear on LED. If LED lights red, remove
and replace batteries.
3. When a wireless camera is discovered,
LED will flash green and audio alarm
will sound.
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Compal NBLB2 User manual
-
Canon SPEEDLITE 320EX User manual
-
Gateway P-79 User manual
-
EUROCOM Commander User manual
-
KIA 2020 Optima Owner's manual
-
Dell Latitude 5424 Rugged Owner's manual
-
-
-
-