Enabling Devices 2252 User manual

Brand
Enabling Devices
Model
2252
Type
User manual

Enabling Devices 2252 is a bubble blower that can be activated by a capability switch, making it accessible for individuals with limited mobility. It features three Paw Patrol characters on the front, making it visually appealing for children. The bubble blower comes with 4 fl. oz. of premium bubble solution and requires 4 AA batteries to operate. It has a 1/8″ jack for use with external capability switches, allowing for hands-free operation. The bubble blower can be used with or without an external switch, and the ON/OFF switch is located on the top of the device.

Enabling Devices 2252 is a bubble blower that can be activated by a capability switch, making it accessible for individuals with limited mobility. It features three Paw Patrol characters on the front, making it visually appealing for children. The bubble blower comes with 4 fl. oz. of premium bubble solution and requires 4 AA batteries to operate. It has a 1/8″ jack for use with external capability switches, allowing for hands-free operation. The bubble blower can be used with or without an external switch, and the ON/OFF switch is located on the top of the device.

For Technical Support:
For Technical Support:For Technical Support:
For Technical Support:
Call our Technical Service Department
Monday through Friday, 9 a.m. to 5 p.m. (EST)
1-800-832-8697
customer_support@enablingdevices.com
Paw Patrol Bubble Blower #2252
USER’S GUIDE
50 Broadway
Hawthorne, NY 10532
Tel. 914.747.3070 / Fax 914.747.3480
Toll Free 800.832.8697
www.enablingdevices.com
www.enablingdevices.comwww.enablingdevices.com
www.enablingdevices.com
To the rescue!
To the rescue!To the rescue!
To the rescue!
Activate your capability switch and the moving wands blow continuous
bubbles for tons of bubble fun. Three of your Paw Patrol buddies are
featured on the front. Great for visual tracking and just plain fun.
Includes 4 fl. oz. of premium bubble solution. Size: 6"L x 5½"W x 7"H.
Requires 4 AA Batteries. Weight: ½ lb.
Operation:
Operation:Operation:
Operation:
1. Paw Patrol Bubble Blower requires 4 AA batteries (Not included) to
operate. Use alkaline batteries only (e.g. Duracell or Energizer
brand). Do not use rechargeable batteries or any other type of
batteries because they supply lower voltage and the unit will not
perform properly. Never mix old and new batteries together or
different brands or types together.
2. The battery compartment is located under bubble blower’s base.
Carefully turn the bubble blower over to reveal the battery
compartment cover. Using a Phillips head screwdriver unscrew the
cover screw and install 4 AA batteries, paying close attention to
proper (+) and (-) battery polarity.
3. Replace the battery compartment cover and secure with the
screw. Connect to any external capability switch (not included) via
the jack located on the side of the bubble blower. Paw Patrol
Bubble Blower is equipped with a 1/8″ jack for use with external
capability switches with a 1/8″ plug. Make sure you have a tight
connection. There should be no gaps.
4. Paw Patrol Bubble Blower can be used with or without an external
switch. The ON/OFF switch is located in the top of the bubble
blower. When using an external capability switch, the ON/OFF
switch needs to be set in the OFF position. Actuate your external
capability switch and the bubbles will start to flow! Once you
release your switch the bubbles will stop.
5. When finished playing with Paw Patrol bubble blower turn the
bubble blower OFF to prevent battery drain.
Troubleshooting:
Troubleshooting:Troubleshooting:
Troubleshooting:
Problem:
Problem: Problem:
Problem: Paw Patrol Bubble Blower
does not function correctly.
Action #1:
Action #1: Action #1:
Action #1: Check that all the batteries are installed, following proper
(+) & (-) polarity. Also check that all batteries are fresh.
Action #2:
Action #2: Action #2:
Action #2: Replace the batteries paying close attention to proper (+)
and (-) battery polarity.
Action # 3:
Action # 3:Action # 3:
Action # 3: Make sure you have enough Bubble solution in the
dipping troth. The Bubble solution should cover the Bubble Dippers
completely.
Action #4
Action #4Action #4
Action #4:
::
: Make sure that the connection between the external
capability switch and the jack is TIGHT. There should be NO gaps.
Action #5
Action #5Action #5
Action #5:
: :
: Try your switch with another switch operated toy/device in
an effort to rule out your switch as the source of the problems.
Care of Unit:
Care of Unit:Care of Unit:
Care of Unit:
If you will not be using Paw Patrol Bubble Blower for an extended
amount of time, we recommend removing the batteries.
Paw Patrol Bubble Blower can be wiped clean with any household
multi-purpose cleaner and disinfectant. We recommend Simple Green,
which is a non toxic biodegradable all-purpose cleaner.
Do not submerge
Do not submergeDo not submerge
Do not submerge the unit, as it will damage the contents and the
electrical components.
Do not use abr
Do not use abrDo not use abr
Do not use abrasive cleaners,
asive cleaners,asive cleaners,
asive cleaners, as they will scratch the surface of the
unit.
Rev
Rev Rev
Rev 4
44
4/
//
/12
1212
12/17
/17/17
/17
  • Page 1 1
  • Page 2 2

Enabling Devices 2252 User manual

Brand
Enabling Devices
Model
2252
Type
User manual

Enabling Devices 2252 is a bubble blower that can be activated by a capability switch, making it accessible for individuals with limited mobility. It features three Paw Patrol characters on the front, making it visually appealing for children. The bubble blower comes with 4 fl. oz. of premium bubble solution and requires 4 AA batteries to operate. It has a 1/8″ jack for use with external capability switches, allowing for hands-free operation. The bubble blower can be used with or without an external switch, and the ON/OFF switch is located on the top of the device.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents