Toro ProCore 864 Aerator User manual

Type
User manual
FormNo.3437-560RevA
ProCore
®
864and1298Aerators
ModelNo.09715—SerialNo.403410001andUp
ModelNo.09716—SerialNo.403410001andUp
Registeratwww.Toro.com.
OriginalInstructions(EN)
*3437-560*A
ThisproductcomplieswithallrelevantEuropean
directives;fordetails,pleaseseetheseparateproduct
specicDeclarationofConformity(DOC)sheet.
WARNING
CALIFORNIA
Proposition65Warning
Useofthisproductmaycauseexposure
tochemicalsknowntotheStateof
Californiatocausecancer,birthdefects,
orotherreproductiveharm.
Introduction
Thismachineisintendedtobeusedbyprofessional,
hiredoperatorsincommercialapplications.It
isdesignedprimarilyforworkinglargeareason
well-maintainedlawnsinparks,golfcourses,sports
elds,andoncommercialgrounds.Usingthisproduct
forpurposesotherthanitsintendedusecouldprove
dangeroustoyouandbystanders.
Readthisinformationcarefullytolearnhowtooperate
andmaintainyourproductproperlyandtoavoid
injuryandproductdamage.Youareresponsiblefor
operatingtheproductproperlyandsafely.
Visitwww.T oro.comformoreinformation,including
safetytips,trainingmaterials,accessoryinformation,
helpndingadealer,ortoregisteryourproduct.
Wheneveryouneedservice,genuineT oroparts,or
additionalinformation,contactanAuthorizedService
DealerorT oroCustomerServiceandhavethemodel
andserialnumbersofyourproductready.Figure1
andFigure2identifythelocationofthemodeland
serialnumbersontheproduct.Writethenumbersin
thespaceprovided.
Important:Withyourmobiledevice,youcan
scantheQRcodeontheserialnumberplate(if
equipped)toaccesswarranty,parts,andother
productinformation.
g262223
Figure1
Model09716
1.Modelandserialnumberlocation
g262224
Figure2
Model09715
1.Modelandserialnumberlocation
ModelNo.
SerialNo.
Thismanualidentiespotentialhazardsandhas
safetymessagesidentiedbythesafetyalertsymbol
(Figure3),whichsignalsahazardthatmaycause
seriousinjuryordeathifyoudonotfollowthe
recommendedprecautions.
©2019—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
2
Contactusatwww.Toro.com.
PrintedintheUSA
AllRightsReserved
g000502
Figure3
Safety-alertsymbol
Thismanualuses2wordstohighlightinformation.
Importantcallsattentiontospecialmechanical
informationandNoteemphasizesgeneralinformation
worthyofspecialattention.
Contents
Safety.......................................................................4
GeneralSafety...................................................4
SafetyandInstructionalDecals..........................4
Setup........................................................................8
1InspectingtheMachine....................................9
2ConnectingtheLowerLinkArms......................9
3ConnectingtheUpperLink.............................10
4ConnectingthePTODriveshaft.......................11
5AdjustingtheSwayLinks...............................12
6LevelingtheMachineSide-to-Side.................13
7AdjustingtheRollerScraper...........................13
8InstallingtheTineHeadsandthe
Tines.............................................................14
9InstallingtheTurfGuards...............................14
10SecuringtheHoodLatches(CE
only)..............................................................14
11ApplyingtheEntanglementDecal.................15
12RemovingtheStorageStands.....................16
ProductOverview...................................................17
Controls...........................................................17
Specications..................................................17
Attachments/Accessories.................................17
BeforeOperation.................................................21
BeforeOperationSafety...................................21
OutcrossTractionUnitControls........................21
AdjustingtheAerationDepth............................21
UnderstandingtheTractionUnit
Controls........................................................22
UnderstandingthePrinciplesof
Operation......................................................22
PracticingtheOperatingProcedures................22
PreparingtoAerate..........................................23
DuringOperation.................................................23
DuringOperationSafety...................................23
OperatingtheMachine.....................................24
AdjustingtheHoleSpacing...............................25
AeratingHardGround.......................................26
UsingNeedleTines..........................................26
AvoidingRootZoneLifting................................26
AdjustingtheRotalinkAssembly.......................26
OperatingTips.................................................27
AfterOperation....................................................27
AfterOperationSafety......................................27
TransportingtheMachine.................................27
CleaningtheMachineafterUse........................27
Maintenance...........................................................28
RecommendedMaintenanceSchedule(s)...........28
MaintenanceSafety..........................................28
JackingtheMachine.........................................29
GreasingtheBearingsandBushings................29
CheckingtheGearboxLubrication....................30
ChangingtheGearboxLubrication...................31
CheckingtheCoringHeadFastener
Torque...........................................................31
InspectingtheBelts..........................................31
AdjustingtheBeltTension.................................31
ReplacingtheDriveBelt...................................32
AdjustingtheSideShield..................................34
ReplacingtheTurfGuards................................34
CoringHeadTiming..........................................34
RemovingtheMachinefromtheTraction
Unit...............................................................35
Storage...................................................................36
StorageSafety..................................................36
StoringtheMachine..........................................36
3
Safety
GeneralSafety
Thisproductiscapableofamputatinghandsand
feetandofthrowingobjects.Alwaysfollowallsafety
instructionstoavoidseriouspersonalinjury.
Usingthisproductforpurposesotherthanitsintended
usecouldprovedangeroustoyouandbystanders.
Readandunderstandthecontentsofthis
Operator’sManualbeforeusingthemachine.
Donotputyourhandsorfeetnearmoving
componentsofthemachine.
Donotoperatethemachinewithoutallguards
andothersafetyprotectivedevicesinplaceand
functioningproperlyonthemachine.
Keepclearofanydischargeopening.Keep
bystandersandpetsawayfromthemachine.
Keepbystandersandchildrenoutoftheoperating
area.Neverallowchildrentooperatethemachine.
Alwaysshutofftheengineofthetractionunit,
removethekey(ifequipped),waitforallmoving
partstostop,andallowthemachinetocool
beforeadjusting,servicing,cleaning,orstoring
themachine.
Improperlyusingormaintainingthismachinecan
resultininjury.Toreducethepotentialforinjury,
complywiththesesafetyinstructionsandalways
payattentiontothesafety-alertsymbol
,which
meansCaution,Warning,orDanger—personalsafety
instruction.Failuretocomplywiththeseinstructions
mayresultinpersonalinjuryordeath.
SafetyandInstructionalDecals
Safetydecalsandinstructionsareeasilyvisibletotheoperatorandarelocatednearanyarea
ofpotentialdanger.Replaceanydecalthatisdamagedormissing.
decal93-6696
93–6696
1.Storedenergyhazard—readtheOperator'sManual.
decal110-4665
110-4665
1.ReadtheOperator'sManual.
decal110-4666
110-4666
1.Installthepostsinthe
standtotheholesinthe
frame.
2.Usepinstosecurethe
frametothestand.
4
decal110-4678
110-4678
1.Coringdepth
decal110-4667
110-4667
1.Springlength
2.Storedenergyhazard—readtheOperator'sManual.
3.Entanglementhazard,belt—stayawayfrommovingparts.
decal110-4668
110-4668
1.Entanglementhazard,shaft—stayawayfrommovingparts.
2.PTOspeedandinputdirection.
3.Usecliptosecurelashcablewhennotinuse.Uselash
cabletosupportthepowertake-offwhenthemachineis
disconnectedfromtractor.
decal110-4670
110-4670
1.Warning—readtheOperator'sManual.
5.Entanglementhazard,belt—keepallguardsinplace.
2.Warning—removetheignitionkeyandreadtheinstructions
beforeservicingorperformingmaintenance.
6.Crushinghazardofhandorfoot—keepbystandersawayfrom
themachine.
3.Warning—receivetrainingbeforeoperatingthemachine.7.Crushinghazardofhandandbody—supportmachineon
standwhennotinuse.
4.Entanglementhazard,belt—stayawayfrommovingparts.
8.Fallinghazard—donotcarrypassengers.
5
decal92-1581
92–1581
decal110-4677
110-4677
1.Turnclockwiseto
decreaseaerationdepth.
2.Turncounterclockwiseto
increaseaerationdepth.
decal110-4664
110-4664
1.ReadtheOperator's
Manual.
3.Boltsize
2.Wrenchsize4.Torque
decal92-1582
92–1582
decal106-8856
106-8856
1.ReadtheOperator'sManual.
6
decal133-8061
133-8061
decal138-9038
138-9038
1.Entanglementhazard—readtheOperator’sManual;stay
awayfrommovingparts;keepallguardsandshieldsin
place.
7
Setup
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
1
Nopartsrequired
Inspectthemachine.
2
Lynchpin2
Connectthelowerlinkarms.
Linkpin1
3
Lynchpin1
Connecttheupperlink.
Bolt(1/2x3inches)
1
Nut(1/2inch)
1
4
Shortdriveshaft,PartNo.115-2839
(maybeneeded;soldseparately)
ConnectthePTOdriveshaft.
5
Nopartsrequired
Adjusttheswaylinks.
6
Nopartsrequired
Levelthemachineside-to-side.
7
Nopartsrequired
Adjusttherollerscraper.
8
Nopartsrequired
Installthetineheadsandthetines.
9
Turfguards(notincluded)
Installtheturfguards.
10
CEComplianceKit,PartNo.110-4693
(notincluded)
1
Securethehoodlatches(requiredfor
CEonly).
11
CEentanglementdecal
4
Applytheentanglementdecal—CE
mowers
Lynchpin(ProCore864)
4
12
Lynchpin(ProCore1298)
8
Removethestoragestands.
8
1
InspectingtheMachine
NoPartsRequired
Procedure
ProCore864
Usethefollowinglistasareference:
Usea30PTOhorsepowerminimumwhen
aeratinginlighttonormalsoilconditions(sandyto
sandy/loamsoilswithaveragecompaction).
Usea35PTOhorsepowerminimumwhen
aeratinginnormaltoheavysoilconditions(heavy
loam,clay,androckysoilswithaboveaverage
compaction).
ThetractionunitmusthaveacategoryIor
II3-pointhitchwithaminimumimplementlift
capacityof714kg(1,575lb).
ThetractionunitmusthaveaPTOoutput-shaft
speedof540rpm.
Adequatefront-endweight(ballast)tooffsetthe
weightofthemachine.
Checkthetireairpressureofthetractionunit.
Adjustthetireairpressureasneeded.
Important:Donotexceedthemaximum
orminimumtireinationpressuresas
recommendedbytiremanufacturer.
ProCore1298
Usethefollowinglistasareference:
Usea45PTOhorsepowerminimumwhen
aeratinginlighttonormalsoilconditions(sandyto
sandy/loamsoilswithaveragecompaction).
50PTOhorsepowerminimumwhenaeratingin
normaltoheavysoilconditions(heavyloam,clay,
androckysoilswithaboveaveragecompaction).
ThetractionunitmusthaveacategoryII3point
hitchwithaminimumimplementliftcapacityof
1043kg(2,300lb)implement.
ThetractionunitmusthaveaPTOoutput-shaft
speedof540rpm.
Adequatefront-endweight(ballast)tooffsetthe
weightofthemachine.
Checkthetireairpressureofthetractionunit.
Adjustthetireairpressureasneeded.
Important:Donotexceedthemaximum
orminimumtireinationpressuresas
recommendedbytiremanufacturer.
g007332
Figure4
3-PointHitchandPTOComponents
1.Lowerlinkarm
3.PTOdriveshaft
2.Upperlinkarm
4.Swaylink
BallastRequirements
WARNING
Mountingthemachinetotherearofthe
tractionunitdecreasestheweightonitsfront
axle.
Failuretoaddrequiredballastmayresultin
anaccidentandsevereinjuryordeath.
Toensureadequatesteeringcontroland
stabilityyoumayneedtoaddballasttothe
frontofthetractionunit.
Refertothetractionunitoperator'smanual
forballastrequirements.
2
ConnectingtheLowerLink
Arms
Partsneededforthisprocedure:
2Lynchpin
Procedure
1.Ensurethatthemachineispositionedonalevel
surfaceforinstallation.
2.EnsurethatthePTOisdisengaged.
9
3.Backthetractionunitsquarelyuptothemachine
untilthelowerlinkarmsarealignedwiththe
hitchpins.
4.Engagetheparkingbrake,shutofftheengine,
andremovethekeyfromtheignition.Waitfor
theengineandallmovingpartstostopbefore
leavingtheoperator'sseat.
Note:Formaximumgroundclearance,install
thehitchpinsinthelowermountingholesof
thehitchplateforthemachine(Figure5).To
determinewhentousetheuppermounting
holes,refertosetupprocedure4Connectingthe
PTODriveshaft(page11).
g028741
Figure5
1.Tophole(hitch
plate—machine)
2.Bottomhole(hitch
plate—machine)
5.Inserttherightandleftlowerlinkarmsontothe
hitchpins(Figure6).
g007292
Figure6
1.Lowerlink2.Lynchpin
6.Securethelowerlinkarmstothehitchpinswith
thelynchpins(Figure6).
3
ConnectingtheUpperLink
Partsneededforthisprocedure:
1Linkpin
1Lynchpin
Procedure
Note:Forbestaerationholequality,alignthefront
ofthemachineverticalwhileoperatingit(Figure7).
Adjusttheupperlinktocontrolthisangle.Referto
OperatingTips(page27)foradditionalinformation.
g007293
Figure7
1.Connecttheupperlinktothelowerholeinthe
bracketandsecureitwiththelinkpinandthe
lynchpin(Figure8).
g007294
Figure8
1.Upperlink3.Lynchpin
2.Linkpin4.Locknut
10
2.Greasethethreadedsteelupperlinktubes.
3.Rotatetheupperlinktotightenthelink.Adjust
ituntiltheframeatthefrontofthemachineis
vertical(Figure8).
4.Tightenthelocknuttosecuretheupperlinkinto
position.
4
ConnectingthePTO
Driveshaft
Partsneededforthisprocedure:
1
Bolt(1/2x3inches)
1
Nut(1/2inch)
Shortdriveshaft,PartNo.115-2839(maybeneeded;
soldseparately)
DeterminingtheTrailingArm
LengthandPTODriveshaft
Important:RefertothePTOdriveshaftowners
manualforadditionaloperatingandsafety
information.
1.Placeastraightedgeacrosstheendsofthe
trailingarmstohelpyoudeterminethedistance
betweenthemandtheendofthePTOoutput
shaft(Figure9).
g028690
Figure9
1.“M”dimension3.PTOoutputshaft(traction
unit)
2.Lowertrailingarms
2.Measurethedistancebetweentheendofthe
PTOoutputshaftandtheattachmentpointof
thelowertrailingarms(Figure9).Recordyour
measurementhere:
Important:ContactyourauthorizedToro
distributorifyouneedanyassistancewhen
performingthismeasurementandifyou
needtoorderanoptionalshorterPTO
driveshaftassembly.
3.Determinewhetheryouneedastandardlength
PTOdriveshaftorashortPTOdriveshaftfrom
thepositionofthePTOoutputshaftonthe
tractionunit,relativetothepositionofthelower
trailingarms.Thisdistanceisdesignatedas“M”
dimension.
ThestandardPTOdriveshaftincluded
withyourmachinetsatractionunit“M”
dimensionassmallas48.89cm(19.25
inches).
Ifthe“M”dimensionissmaller,weofferan
optionalshortPTOdriveshaftassembly,
whichtsatractionunit“M”dimensionas
smallas39.37cm(15.50inches);referto
thePartsCatalogforyourmachine.
Important:Ifnecessary,installthe
shortdriveshaft,PartNo.115-2839(sold
separately).Inmostcases,theshort
driveshaftisnotneeded.
4.Ifyourtractionunitisequippedwithadjustable
trailingarms,changethelengthoftrailingarms
untilthe“M”dimensionmeasures:
Refertotheoperator'smanualforyourtraction
unit.
48.89cm(19.25inches)orlongerforthe
standardPTOshaft
39.37cm(15.50inches)orlongerforthe
optionalshortPTOshaft
InstallingthePTODriveshaft
CAUTION
OperatingthemachinewithoutthePTO
guardsandshieldsmaycauseinjuryordeath.
KeepallPTOguardsandshieldsinplace.
OnCEmodels,connectthechainsbetween
thePTOdriveshaftguardsandthelink
arms.
1.OntheProCore864only,removethelowerPTO
shield(Figure10).
11
g007295
Figure10
ProCore864
1.LowerPTOshield3.Screw
2.Clipnut
2.AssemblethePTOdriveshafttothegearbox
inputshaftofthemachine(Figure11)withabolt
(1/2x3.00inches)andanut(1/2inch).
g007296
Figure11
1.Gearboxinputshaft
4.Bolt
2.Nut
5.PTOdriveshaft
3.PTOshaftcoupler
3.AssemblethePTOdriveshafttothePTOoutput
shaftofthetractionunit.
g007328
Figure12
1.PTOoutputshaft(traction
unit)
3.PTOdriveshaft
2.PTOshaftcoupler
4.SlidethePTOdriveshaftforwardasfarasthe
PTOoutputshaftallows.
5.PullbackonthelockingcollarofthePTOshaft
couplertosecurethePTOdriveshaft.Slidethe
PTOdriveshaftbackandforthtoensurethatit
islockedsecurely.
6.OnCEmodelsonly,connectthesafetychains
fromthedriveshaftguardstotheweldedclipson
thelinkarms.Makesurethatthechainsremain
slackwhenthemachineisraisedorlowered.
7.OntheProCore864,installthelowerPTOshield
tothemachine.
8.Verifythatthetelescopingtubehasaminimum
of76mm(3inches)overlapwhenthemachine
israisedtothemaximumheight.
Tochecktheoverlap,measurethedistance
betweentheendshields,asshowninFigure
13.Thisdimensionmustnotexceed406mm
(16inches).Ifso,movethelowerliftpinstothe
uppersetofholesbeforeoperatingthemachine.
g007297
Figure13
1.406mm(16inches)
12
5
AdjustingtheSwayLinks
NoPartsRequired
Procedure
TheProCore864isdesignedtobeoffsetfromthe
tractionunitcenterline.Thegearboxinputshaft
isoffset40mm(1.57inches)totheleftofcenter
andthemachineisoffset145mm(5.70inches)to
therightofthecenterline.Adjusttheswaylinks
asneeded.
TheProCore1298isdesignedtobecenteredwith
thetractionunitcenterline.Adjusttheswaylinks
asneeded.
Adjusttheswaylinksonthelowerdraftarmsofthe3
pointhitchtoresistside-to-sideswaytoamaximum
of25mm(1inch)ateachside(Figure14).
g007333
Figure14
1.Swaylink(lowerdraftarm)
Adjustthelowerlinksinboarduntiltheycontactthe
machinemountingplates.Thisreducesstresson
thepins.Ifthetractionunithasswaychainsinstead
ofswaylinks,installwashersbetweenthelowerlink
armandlynchpintoreducetheoverhungloadonthe
liftpins.
Note:Refertothetractionunitoperator'smanualfor
additionalinstallationandadjustmentprocedures.
6
LevelingtheMachine
Side-to-Side
NoPartsRequired
Procedure
1.Parkthetractionunitandthemachineona
level,rmsurface.
2.Placealevelontopoftheframeofthemachine
tocheckitforlevelside-to-side(Figure15).
g007329
Figure15
1.Level
3.Ifprovided,turntheadjustablelinkbodytoraise
orlowerthelinkarmuntilthemachineisleveled
side-to-side.
Note:Refertothetractionunitoperator's
manualforadditionaladjustmentprocedures.
7
AdjustingtheRoller
Scraper
NoPartsRequired
Procedure
Adjusttherollerscrapersothatthereisagapof
approximatelya1to2mm(0.06to0.09inch)between
thescraperandtheroller.
1.Loosenthefastenerssecuringeachendof
scrapertorollerscrapertab(Figure16).
13
g007330
Figure16
1.Rollerscraper2.Nut
2.Slidetherollerscraperinoroutuntiltherequired
positionisattained,andtightenthefasteners.
3.OntheProCore864only,youcanadjustthe
stopboltonthecentersupporttoattainthe
propergap.
8
InstallingtheTineHeads
andtheTines
NoPartsRequired
Procedure
Awideselectionoftinesandtineheadsareavailable
forthemachine.Choosethetinetype,size,and
spacingsrequiredforthejob.Installthetineheadand
tinespertheInstallationInstructionssuppliedwith
eachtinekit;refertoProCore864tineconguration
tableandProCore1298tinecongurationtablein
Attachments/Accessories(page17).
Important:Neveroperatethemachinewithout
thetineheadsinstalled.Thearmsmaymove
excessivelyanddamagetheframeofthemachine.
9
InstallingtheTurfGuards
Partsneededforthisprocedure:
Turfguards(notincluded)
Procedure
Awideselectionofturfguardsisavailableforthe
machine.Usetheappropriateturfguardsforthe
selectedtineheads.
1.Loosenthenutssecuringtheturfguardclamps
totheturfguardtoolbar(Figure17).
g007331
Figure17
1.Turfguard2.Turfguardclamp
2.Slidetheappropriateturfguardundertheturf
guardclamp.
3.Adjusttheturfguards,lefttoright,tomaintain
equaldistancetothetineswithineachslot.
4.Tightenthenutssecuringtheturfguard.
5.Mounttheremainingturfguardsandsecurethe
turfguardclamps.
Important:Fromtherearofthemachine,
checkthatthetineslineupwiththecenterof
thegapsintheturfguards.
14
10
SecuringtheHoodLatches
(CEonly)
Partsneededforthisprocedure:
1
CEComplianceKit,PartNo.110-4693(notincluded)
Procedure
Note:TheCECompletionKit,PartNo.110-4693is
requiredtocompletethisstep.
1.OntheProCore864model,installalockbracket
overtheleftandrightrearlowerhoodandupper
hoodlatcheswithatapbolt(4total);referto
Figure18.
g007299
Figure18
1.Tapbolt3.Internallockwasher
2.Lockbracket4.Rearcover
2.OntheProCore1298model,installalock
bracketoveralltherearlowerhoodlatchesand
theoutsideupperhoodlatchonboththeright
andtheleftrearcoverswithatapbolt(3per
coringhead,6total);refertoFigure18).
3.Usingapliersoradjustablewrench,thread
aninternallockwasherontoeachbolt(1to2
threads)tosecurethelatch(Figure18).
11
ApplyingtheEntanglement
Decal
CEMowers
Partsneededforthisprocedure:
4
CEentanglementdecal
Procedure
Important:ThisprocedureisrequiredforallCE
countriesandanywhereEnglishisnotcommonly
spoken.
1.Rotatetheshaftguardtoaccesstheexisting
entanglementdecal(Figure19).
g273731
Figure19
1.Existingentanglement
decal
2.CEentanglementdecal
2.Cleantheexistingentanglementdecalandthe
guardareasurroundingthedecal.
3.RemovethebackingfromtheCEentanglement
decal.
15
4.PlacetheCEentanglementdecaloverthe
existingentanglementdecal(Figure19).
12
RemovingtheStorage
Stands
Partsneededforthisprocedure:
4
Lynchpin(ProCore864)
8
Lynchpin(ProCore1298)
Procedure
1.Raisethemachine7.6to15.2cm(3to6inches)
offtheground.
2.Removethenutsandthelockwasherssecuring
thestoragestandstothemachine(Figure20).
g007303
Figure20
1.Storagestand
3.Nut
2.Lockwasher
3.Removethestoragestands.
4.Insertthelynchpins(includedinlooseparts)
intothestandpinsforstorage(Figure20).
Note:Usethestoragestandswheneveryou
removethemachinefromthetractionunit.
16
ProductOverview
Controls
DepthAdjuster
Rotatethedepthadjusterinputshaftclockwiseto
reducetheaerationdepthorcounterclockwiseto
increasetheaerationdepth(Figure21).
g007304
Figure21
1.Depthadjusterinputshaft
3.Depthindicatordecal
2.Lockingplate4.Depthalignmentmark
Note:17revolutionsofthedepthadjusterequal
approximately6.4mm(1/4inch)depthchange.
Specications
Note:Specicationsanddesignaresubjectto
changewithoutnotice.
ProCore864Aerator
WorkingWidth
163cm(64inches)
OverallWidth170cm(67inches)
OverallLength89cm(35inches)
OverallHeight98cm(38.5inches)
Weight
714kg(1,575lb)
ProCore1298Aerator
WorkingWidth
249cm(98inches)
OverallWidth257cm(101inches)
OverallLength89cm(35inches)
OverallHeight98cm(38.5inches)
Weight
1043kg(2,300lb)
Attachments/Accessories
AselectionofT oroapprovedattachmentsand
accessoriesisavailableforusewiththemachine
toenhanceandexpanditscapabilities.Contact
yourAuthorizedServiceDealerorauthorizedToro
distributororgotowww.T oro.comforalistofall
approvedattachmentsandaccessories.
Toensureoptimumperformanceandcontinuedsafety
certicationofthemachine,useonlygenuineT oro
replacementpartsandaccessories.Replacement
partsandaccessoriesmadebyothermanufacturers
couldbedangerous,andsuchusecouldvoidthe
productwarranty.
17
ProCore864TineCongurationTable1of3
TineKitDescriptionNeedleTine
QuadTine(2x5)QuadTine(1x6)
ModelNo.097390973609737
KitQty.
444
TinesRequired408048
LateralSpacing40mm(1.6inches)0mm(1.6inches)33mm(1.3inches)
Mount5mmand8mm
10mm(3/8inch)diameter10mm(3/8inch)diameter
TurfGuardPartNo.
120-1047120–1061120-1062120-1050120–1061120-1062120-1050120-1063120-1064
RequiredQty.
211211211
TineOptions
5mmand8mmNeedles
TitanandTitanQuad;Titanand
TitanMaxCross;TitanSolid
Round
TitanandTitanQuad;Titanand
TitanMaxCross;TitanSolidRound
ProCore864TineCongurationTable2of3
TineKitDescription3-Tine4-Tine3-TineHD
ModelNo.097940979609797
KitQty.
444
TinesRequired243224
LateralSpacing66mm(2.6inches)51mm(2.0inches)66mm(2.6inches)
Mount
19mm(3/4inch)diameter19mm(3/4inch)diameter22mm(7/8inch)diameter
TurfGuardPartNo.
120-1044120-1057120-1062120-1045120-1059120-1060120-1044120-1057120-1058
RequiredQty.
211212211
TitanHollowandMaxHollow;Titan
SideEjectandMaxSideEject
TitanHollowandMaxHollow;
TitanSideEjectandMaxSide
Eject
TitanHollowandMaxHollow;Titan
SideEjectandMaxSideEject
TineOptions
TitanCrossandMaxCross*;Titan
Slicing;TitanFairwayandHD
FairwayTitanSplit;TitanSolid
Round
TitanCrossandMaxCross*;Titan
Slicing;TitanFairwayandHD
FairwayTitanSplit;TitanSolid
Round
TitanCrossandMaxCross*;Titan
Slicing;TitanFairwayandHD
FairwayTitanSplit;TitanSolid
Round
18
ProCore864TineCongurationTable3of3
TineKitDescription
QuickChange(3-Tine)QuickChange(4-Tine)
ModelNo.0971109719
KitQty.
44
TinesRequired2432
LateralSpacing66mm(2.6inches)51mm(2.0inches)
MountNotApplicableNotApplicable
SleeveDescription19mm(3/4inch)122mm(7/8inch)19mm(3/4inch)22mm(7/8inch)
PartNo.108-6837108-6838108-6837108-6838
RequiredQty.
24243232
ToolKitPartNo.(1
required)
114-0890-01114-0890-01
TurfGuardPartNo.
120-1044120-1057120-1058120-1045120–1059120-1060
RequiredQty.
211211
TitanHollowandMaxHollow;TitanSideEject
andMaxSideEject
TitanHollowandMaxHollow;TitanSideEjectandMax
SideEject
TineOptions
TitanCrossandMaxCross*;TitanSlicing;
TitanFairwayandHDFairwayTitanSplit;
TitanSolidRound
TitanCrossandMaxCross*;TitanSlicing;TitanFairway
andHDFairwayTitanSplit;TitanSolidRound
ProCore1298TineCongurationTable1of2
TineKitDescriptionNeedleTine
QuadTine(2x5)QuadTine(1x6)
3-Tine
ModelNo.09739097360973709794
KitQty.
6666
TinesRequired601207236
LateralSpacing40mm(1.6inches)0mm(1.6inches)33mm(1.3inches)66mm(2.6inches)
Mount5mmand8mm
10mm(3/8inch)
diameter
10mm(3/8inch)
diameter
19mm(3/4inch)
diameter
TurfGuardPartNo.
120-1047120-1052120-1047120-1052120-1050120-1053120-1044120-1051
RequiredQty.
42424242
TitanHollowandMax
Hollow;TitanSideEject
andMaxSideEject
TineOptions
5mmand8mmNeedles
TitanandTitanQuad;
TitanandTitanMax
Cross;TitanSolid
Round
TitanandTitanQuad;
TitanandTitanMax
Cross;TitanSolidRound
TitanCrossandMax
Cross*;TitanSlicing;
TitanFairwayandHD
FairwayTitanSplit;Titan
SolidRound
19
ProCore1298TineCongurationTable2of2
TineKitDescription4-Tine3-TineHD
QuickChange(3-Tine)QuickChange(4-Tine)
ModelNo.09796097970971109719
KitQty.
6666
TinesRequired48363648
LateralSpacing51mm(2.0inches)66mm(2.6inches)66mm(2.6inches)51mm(2.0inches)
Mount
19mm(3/4inch)
diameter
22mm(7/8inch)
diameter
NotApplicableNotApplicable
SleeveDescription19mm(3/4
inch)
22mm
(7/8inch)
19mm
(3/4inch)
22mm(7/8
inch)
PartNo.108-6837108-6838108-6837108-6838
RequiredQty.
NotApplicableNotApplicable
36364848
ToolKitPartNo.(1
required)
NotApplicableNotApplicable114-0890-01114-0890-01
TurfGuardPartNo.
120-1045120-1046120-1044120-1051120-1044120-1051120-1045120-1046
Qty.(required)
42424242
TitanHollowandMax
Hollow;TitanSideEject
andMaxSideEject
TitanHollowandMax
Hollow;TitanSideEject
andMaxSideEject
TitanHollowandMax
Hollow;TitanSideEject
andMaxSideEject
TitanHollowandMax
Hollow;TitanSideEject
andMaxSideEject
TineOptions
TitanCrossandMax
Cross*;TitanSlicing;
TitanFairwayandHD
FairwayTitanSplit;Titan
SolidRound
TitanCrossandMax
Cross*;TitanSlicing;
TitanFairwayandHD
FairwayTitanSplit;Titan
SolidRound
TitanCrossandMax
Cross*;TitanSlicing;
TitanFairwayandHD
FairwayTitanSplit;Titan
SolidRound
TitanCrossandMax
Cross*;TitanSlicing;
TitanFairwayandHD
FairwayTitanSplit;Titan
SolidRound
20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40

Toro ProCore 864 Aerator User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI