Scott Living 1457MR-24-800 Installation guide

Type
Installation guide
Questions, problems, missing parts?
Before returning to your retailer,
call our customer service department at
1-855-571-1044,
9 a.m. - 5 p.m., ES T, Monday - Friday.
www.greentouchhome.com
Français p. 9
Español p. 17
Date Purchased _______________________
24-IN Lighted Mirror
MODEL # 1457MR-24-800
ASSEMBLY, CARE & USE INSTRUCTIONS
1
PACKAGE CONTENTS
2
PART DESCRIPTION QUANTITY
A Mirror 1
B Main Body 1
A
B
HARDWARE CONTENTS (NOT SHOWN ACTUAL SIZE)
AA BB
DD
PART DESCRIPTION QUANTITY
AA Wall Mount Screw 4
BB Drywall Anchor 4
DD Screw 1
3
PRODUCT SPECIFICATION
Power Input: 120VAC / 60 Hz
Power Rating: Max. 20W
LED Light Color: Natural White
24in
30in
30in
24in
1-1/2in
16-57/64in
13-7/16in
16-11/16in
12-33/64in
8-11/32in
4-11/64in
23-59/64in
55/64in
55/64in
SAFETY INFORMATION
IMPORTANT SAFETY INSTRUCTIONS
4
When using an electrical furnishing, basic precautions should always be followed, including the following:
Read all instructions before using this mirror.
DANGER – To reduce the risk of electric shock:
1. Always unplug the power cord before cleaning around the electrical components.
WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons:
1. Unplug from outlet before putting on or taking off parts.
2. The appliance is not to be used by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction. Children should be supervised to ensure that they do not play with the appliance.
3. Use this furnishing only for its intended use as described in these instructions. Do not use
attachments/accessories not recommended by the manufacturer.
4. Never operate this furnishing if it has a damaged cord or plug, if it is not working properly, if it has
been dropped or damaged, or dropped into water. Return the furnishing to a service center for
examination and repair.
5. Never drop or insert any object into any opening.
6. For household and dry locations use only.
7. Do not use outdoors.
8. Never operate the furnishing with the air openings blocked. Keep the air openings free of lint, hair, and
the like.
9. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
This equipment has been tested and found to comply with the limits for Class B digital devices,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. The equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio or television reception, which can be determined by turning the equipment
off and on. The user is encouraged to try and correct the interference by one or more of the following
measures:
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.
Modifications not approved by the party responsible for compliance could void user’s authority to
operate the equipment.
Reorient or relocate the receiving antenna
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
PREPARATION
MOUNTING OPTIONS
10. To disconnect, turn all controls to the off position, then remove plug from outlet.
11. WARNING: Risk of Electric Shock – Connect this furnishing to a properly grounded outlet only. See
Grounding Instructions.
12. Keep the cord away from heated surfaces.
SAVE THESE INSTRUCTIONS
SAFETY INFORMATION
5
GROUNDING INSTRUCTIONS
This product is for use on 120 volts. The cord has a plug as shown below. See illustration for grounding
instruction. An adapter as shown at (C) is available for connecting three-blade grounding type plugs to
two slot receptacles. The green grounding lug extending from the adapter must be connected to a
permanent ground such as a properly grounded outlet box. The adapter should not be used if a three-slot
grounded receptacle is available.
WARNING: Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Secure main body (B) to wall
using screws (AA)(included) at
marked stud locations.
Screw wall anchors (BB)(included) flush
into desired wall location. Secure main
body (B) onto wall using provided screws
(AA)(included) into wall anchors (BB).
Drill holes at marked locations,
then insert wall anchors (not
included) into holes. Secure
the main body (B) to wall using
fasteners (not included).
Estimated
Assembly Time:
20 Minutes
Helpful Tools
(not included):
Tape Measure
Level
Tools Required for
Installation (not included):
Phillips Screwdriver
STUD WALL: DRYWALL: CONCRETE WALL:
(CONT’D)
A B C
Grounding Pin
Grounding Means
Metal
Screw
Cover of
Grounding
Box
Adapter
ASSEMBLY INSTRUCTIONS
Using the dimension drawings on page 3, determine the
desired location for the mirror. Take into account you
should have a 3 inch minimum clearance between the
bottom of the mirror and the top of the faucet/vanity.
Use the main body (B) to mark the screw locations on
the wall.
Note: 1. Make sure it is level.
2. The installation location has to have power
outlet inside of main body (B) as shown
1.
Secure the main body (B) to the wall using screws (AA)
or the hardware best suited for your wall type. Refer to
Mounting Options on page 5. Be careful to not drill into
hidden electrical or plumbing lines inside the wall when
mounting main body (B) to wall.
2.
6
With the help of another adult, hold mirror (A) away
from the main body (B), connect the DC plug(1), then
plug the power cord into the wall outlet (2). Secure
power cord to avoid contact with sharp objects.
3.
1
B
3
A
B
2
2
B
AA
AA
AA
AA
AA
BB
Hardware Used
Wall Mount Screw
Drywall Anchor
x 4
x 4
AA
BB
1
ASSEMBLY INSTRUCTIONS
Align the hook on the back of the mirror (A) with the
receiving bracket on the main body (B). Carefully lower
the hook into the receiving bracket.
WARNING: Make sure it feels fully seated and secure
before releasing the mirror (A).
Back Light
The touch switch on the front of the mirror is to turn the
back light ON/OFF.
When the back light is powered ON the button color will
glow Blue; when it is in standby mode it will glow Red.
Adjust Brightness of the Back Light
When the back light is powered ON, press and hold the
power button for approximately 3 seconds. The
brightness will scroll up then back down. Take your
finger off the touch button to leave the brightness at the
setting you choose. This brightness setting will be
retained in memory. To adjust the brightness repeat the
above steps.
4.
7
Install the screws (DD) on bottom sides as shown.5.
5
A
OPERATING INSTRUCTIONS
Touch Switch
(CONT’D)
Hardware Used
Screw
x 1
DD
DD
4
A
B
The glass can be cleaned using standard household glass cleaning agents.
Any other servicing should be performed by an authorized service representative.
The manufacturer warrants this item against defects in materials and workmanship for a period of one
(1) year from the date of original retail purchase. This warranty applies only to the original purchaser.
This warranty does not apply to any damage on the product by accident, misuse, or modified,
improper installation or by affixing accessories not produced by the manufacturer. The manufacturer
is not accountable whatsoever for product installation during the warranty period. There is no further
expressed warranty. The manufacturer shall not be legally responsible for incidental, consequential
or special damages arising at or in connection with product use or performance except as may
otherwise be accorded by law. The manufacturer disclaims any and all implied warranties.
CARE AND MAINTENANCE
WARRANTY
8
For replacement parts, call our customer service department at 1-855-571-1044, 9 a.m. - 5 p.m., EST,
Monday - Friday.
REPLACEMENT PARTS
AA CC DDBB
PART DESCRIPTION PART #
AA Wall Mount Screw MWA-2.5x3.1-SET2
MWA-2.5x3.1-SET2BB Drywall Anchor
PU-4X25-SSDD Screw
CC LED Driver ADE20-12VLS
A
B
CONTENU DE L’EMBALLAGE
10
PIÈCE DESCRIPTION QUANTITÉ
A Miroir 1
B Corps principal 1
CONTENU MATÉRIEL (NON REPRÉSENTÉ EN TAILLE RÉELLE)
PIÈCE DESCRIPTION QUANTITÉ
AA Vis de support mural 4
BB Ancrage à placoplâtre 4
DD Vis 1
AA BB
DD
A
B
CONTENIDO DEL PAQUETE
18
PIEZA DESCRIPCIÓN CANTIDAD
A Espejo 1
B Estructura principal 1
CONTENIDO DE HARDWARE (NO SE MUESTRAN EN TAMAÑO REAL)
PIEZA DESCRIPCIÓN CANTIDAD
AA Tornillo de montaje en pared 4
BB Taco para tablaroca 4
DD Tornillo 1
AA BB
DD
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24

Scott Living 1457MR-24-800 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI