Zengest Full Extension Less Noise Ball Bearing Drawer Slides, 10 Inches, 1-Pair User guide

Type
User guide

Zengest Full Extension Less Noise Ball Bearing Drawer Slides, 10 Inches, 1-Pair are designed to provide smooth and quiet operation for your drawers. They feature a full extension design, allowing you to access the entire drawer without any obstruction. The ball bearings ensure a smooth and effortless glide, while the less noise design minimizes any unwanted sounds. These drawer slides are perfect for a variety of applications, including kitchens, bathrooms, and offices. With their durable construction and easy installation, they are sure to provide years of trouble-free use.

Zengest Full Extension Less Noise Ball Bearing Drawer Slides, 10 Inches, 1-Pair are designed to provide smooth and quiet operation for your drawers. They feature a full extension design, allowing you to access the entire drawer without any obstruction. The ball bearings ensure a smooth and effortless glide, while the less noise design minimizes any unwanted sounds. These drawer slides are perfect for a variety of applications, including kitchens, bathrooms, and offices. With their durable construction and easy installation, they are sure to provide years of trouble-free use.

Drawer slide installation instructions
By ZENGEST
Tool:
A Phillips screwdriver
Method / Step:
1. The installation of the drawer slide is very simple, but some
details need to be taken care of, otherwise the drawer installed
later cannot be used normally. The drawer slide can be divided
into three parts: the outer rail, the middle rail, and the inner rail. As
shown below
2 When installing the drawer slide rail, the inner rail needs to be
removed from the main body of the drawer slide rail. The method
of disassembly is also very simple. There is a spring clip on the
back of the drawer slide rail. Just press it up slightly to press it.
The inner rail is removed. As shown below
3 Note that the middle and outer rails are not removable and
cannot be forcibly removed. As shown below
4 Install the outer rail and middle rail sections of the split chute first
on both sides of the drawer box, and then install the inner rail on
the side panel of the drawer. As shown below
5 When installing the slideway, it is recommended to assemble the
drawer as a whole. There are two holes on the track to adjust the
up and down and front and back distance of the drawer. At the
same time, ensure that the left and right slide rails are in the same
horizontal position.
6 Then install the inner and outer rails and screw the inner rail to
the drawer cabinet in the measured position (note that the inner
rail and the fixed middle rail and outer rail have the same position)
7 tighten the holes corresponding to the two screws separately
8 The other side is also in the same way, but pay attention to keep
the inner rails on both sides horizontally parallel
9 Note that if the middle and outer rails of the previous step are not
level, the card may not be pushed at this time. At this time, either
check the position of the outer rail or adjust the position of the
inner rail to the outer rail.
10 After the installation, pull the drawer and try it. If there is any
problem, you need to re-adjust it. If the drawer is smooth, you can
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Zengest Full Extension Less Noise Ball Bearing Drawer Slides, 10 Inches, 1-Pair User guide

Type
User guide

Zengest Full Extension Less Noise Ball Bearing Drawer Slides, 10 Inches, 1-Pair are designed to provide smooth and quiet operation for your drawers. They feature a full extension design, allowing you to access the entire drawer without any obstruction. The ball bearings ensure a smooth and effortless glide, while the less noise design minimizes any unwanted sounds. These drawer slides are perfect for a variety of applications, including kitchens, bathrooms, and offices. With their durable construction and easy installation, they are sure to provide years of trouble-free use.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI