JOBO CARcam 1080P GPS User manual

Category
Drive recorders
Type
User manual
1
GB
www
.jobo.com
Instruction Manual
Congratulations to buying this sophisticated product! The JOBO
CARcam encorporates modern technology and user-friendly
design to enhance safety in traffic and enjoyment of driving. The
JOBO CARcam records movies in Full-HD-Quality with 1080 P.
When the CARcam is connected with the 12V Cigarette lighter it
automatically starts recording when the engine is powered on
and stops recording when the motor is turned off. Cars with
permanent power supply in the cigarette lighter require to
detach the cable to turn off recording.
The Camera allows to make loop-recording. You can set the
camera to take 3, 5, 10 minutes video clips. As soon as the
(optional) micro-SD card is full, the oldest video sequence is
automatically over-written.
The built-in Gravity-Sensor detects shock and protects video files
against being over-written. (Black-Box Function).
The video quality of 1080 P in H.264 codec allows for a most
economical use of memory capacity whilst offering enough
details to read a license plate from approximately 10 to 15 yards
distance.
JOBO is a 90 years old photo company and we wish you relaxed
and safe driving with the JOBO Carcam.
2
GB
www
.jobo.com
1 AV-Out port
2 charging port 5V (for car charger)
3 POWER key
4 RECORD / OK key
5 MENU key
6 MODE key
7 DOWN
8 UP
9 Microphone
10-11-12 STATUS indication:
blue = working.
blue (on/off): recording in progress
red: charging
13 Display
14 Speaker holes
15 RESET hole
16 Lens
17 Slot for micro-SD card
18 HD-Out
3
GB
www
.jobo.com
Technical Information
Full-HD-Video (1080P)
GPS function to determine speed and position
Optimum data compression in H.264 format
Loop recording for endless operation if connected by car charger (3-5-10 min.)
Auto START: Camera automatically starts recording when car engine is ignited!
motion detector: video recording automatically starts in case of motion within viewing angle of camera lens (120°
viewing angle)
G-sensor (Off/high/middle/low): locks latest recording loop against over-writing in case of abrupt stop (e.g. in case of
accident/black box):
2.5” Colour-LCDisplay
menu settings: contrast, white-balance, sharpness, effects: vivid, monochrome, negative, sepia, art
Photo resolution: 1.3 MP
Compatible with micro SD-card up to 32GB
HD-connector
Operating Temperature: 0-45°
color: black
Scope of delivery
JOBO Car Cam Full HD 1080
Suction Mount for windshield
3M glue pad for mount on windshield
car charger
Safety Instructions
Please make all adjustments while NOT driving. We recommend to make adjustments with car engine powered off
– and NEVER when driving.
Product Care
This camera is designed for in-car operation Please keep it free from dirt and water. Do not expose to extreme
temperatures or rapid temperature change. In spite of the robust design this camera is a high-tech-product. Please
handle with care.
Initial Operation
Before first operation please connect the camera with power from the car charger. For operation it is mandatory
to insert an (optional) micro SD card in to the CARcam (17).
Depending on the camera setting the camera will instantly start video recording. If you wish to stop recording –
please press the R/OK Key (4) to end recording.
The camera is optimized for taking videos. In case of need the camera can be set to photo mode (6) to allow still
image recording with 1.3 MP quality.
4
GB
www
.jobo.com
VIDEO settings: (Video camera symbol)
Please press the MENU key (5), to open the menu options.
With the DOWN key (7) and UP key (8) you can easily navigate through the menu options. Please press the OK-key
(4) to confirm a menu option.
The most important settings are described under 1, 2, 5, 8 below:
1. Resolution: You can choose 1080 P resolution with 25 or 30 fps. This is the optimum choice. To economize
memory space you can also choose the lower resolution of VGA. We recommend to always use the 1080 P setting.
Resolution
1080HD 1920x1080
720P 1280x720
WVGA 848x480
VGA 640x480
2. Cyclic record (loop recording)
This important setting allows the camera to make loop recordings. You can set the camera to make 3, 5, or 10
minute video clips. Whenever the (optional) micro SD card is full, the oldest recording loop will be over-written.
Loop recording can also be switched off.
In the normal On Screen Display (OSD) the loop recording is symbolized by a pictogram. The chosen video
sequence length is also indicated underneath the pictogram.
Lupe recording
Off
3 Minutes
5 Minutes
10 Minutes
3.
HDR
Off
On
4. Exposure: Here you can set the camera to over expose with 1/3 or 2/3 aperture in case of strong facing light or
underexpose correspondingly depending on the lighting conditions. Usually the default setting of +0/0 will lead to
good results.
Exposure
till +2.0
+2/3
+1/3
+0.0
-1/3
-2/3
till -2.0
5. Motion detection: If this feature is activated, the camera will instantly start recording when turned on as soon as a
movement is detected within the viewing angle of the CARcam. After 10 seconds without motion within viewing angle the
camera recording is switched off again. As soon as a new movement is detected the recording automatically restarts.
5
GB
www
.jobo.com
This allows for use of surveillance purposes as long as long as the camera is connected to the power supply. An AC
adapter you can order from your dealer.
When the motion detector is activated the pictogram of a runner is shown in the OSD.
6. Recording / Microphone:
The sound recording can be activated or deactivated. If sound recording is activated the pictogram of a
microphone is shown in the OSD.
7. Date Stamp
This function allows you to display the date and time on the display and the video.
Date Stamp
Off
On
8. G-Sensor (Gravity Sensor)
This is a very important feature, developed for dash cameras.
The built-in Gravity sensor senses any impact and will protect the corresponding video file against being over-
written. This will avoid important recordings from being lost (“Black-Box-Function”). We recommend to activate
this function, especially when making cyclic recordings (loop recordings). If the G-Sensor is activated this is
indicated by a pictogram of a car with illustrated vibration.
9. GPS- Global positioning sensor
This setting allows you to turn off or on the GPS receiver. It has to be turned on to display your current speed in
the videos.
GPS
Off
On
10.
Plate Number
ABC…
The text which is entered here will get displayed in the video when the date stamp is activated.
With the button 7 you can toggle between letters and numbers.
With the button 4 you move to the next space.
Main Settings (symbol of a wrench)
1. Date / Time.
Before initial operation we recommend you to set correct time and date. The time and date set here can be
recorded in the video and shown in play-back. If the GPS receiver is turned on, then the clock will get set
automatically. Check if the time zone is set correctly. (10)
2. Auto Power off:
With this setting you can activate complete auto-power off of the camera after 2, 5, or 10 minutes of making no
camera settings. If this setting is activate the camera will completely power off. We do not recommend you to
activate this option.
3. Beep Sound:
The beep sound during menu operation can be activated or deactivated
4. Language:
You can choose any of the following languages: English, German, French, Spanish, Italian, Portuguese, Chinese,
Japanese, and Russian.
5. TV-Mode:
You can choose between the European PAL-Standard or the American NTSC setting.
6
GB
www
.jobo.com
6. Hz / Frequency:
Here you can choose between the European 50 Hz or the American USA 60 Hz video frequency. Depending on this
setting the camera will make recordings either with 25 or with 30 frames per second (fps).
7. Format:
This feature allows you to (re-)format the micro-SD card inserted into the camera. We do recommend you to
reformat any new micro-SD card. Please make sure to use micro-SD cards of Class 6 standard or higher.
8.
This function allows you to activate auto-power off of the display after 30sec, 1, or 2 minutes of making no camera
settings. If this setting is activate the camera will not power off. Only the display will be blank while the camera
will still be operating. We recommend keeping this function deactivated.
Screen Saver
Off
30 sec
1 min
2 min
9.
This function allows you to activate auto-power off of the complete Camera after 5, 10, or 30 sec once the power
supply is turned off.
Delay shutdown
Off
5 sec
10 sec
30 sec
10. Time zone. Here you can set your time zone in which you are. (In Germany it is GMT+1:00 for the normal time
and for the summer time it is GMT+2:00)
Auto Update
Time
GMT -X:00
GMT+X:00
11. Default Setting:
This function allows you to reset the camera to factory settings. All manual menu settings will get lost when the
camera is reset to factory settings.
12. Date Stamp:
This feature was developed specifically for dash cams. If activated the video will record the date and time of the
recording and show it as a time-stamp during play-back. This allows for automatic date and time documentation as
long as date and time have been correctly set before making recordings (see above point 1).
13. Version:
This menu point shows the currently installed firm ware version.
Photofeatures:
As mentioned at the start this camera is optimized for video recording. The photo function allows for similar menu
settings as the video function. Due to the optimization on video performance the photo resolution is limited to the
native sensor size of 1.3 MP. If a resolution of 3 MP or 5 MP is chosen this is an interpolated resolution only and
will not significantly enhance the actual photo resolution.
7
GB
www
.jobo.com
JOBO International GmbH,
Kölner Str. 58a, D-51645 Gummersbach.
www.jobo.com
Technical Changes can be made at any time without prior notice - 2014 / 04
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

JOBO CARcam 1080P GPS User manual

Category
Drive recorders
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI