Streamline MH2180-120 Installation guide

Brand: Streamline

Model: MH2180-120

Category: Sanitary ware

Type: Installation guide

Streamline MH2180-120

This single-handle freestanding tub and shower faucet offers both style and functionality to enhance your bathing experience. With its durable acrylic surface and resistance to acids and organic solvents, this faucet is built to last and withstand everyday use.

Key Features:

Acrylic surface for easy cleaning and lasting shine
Resistant to acids, alkalis, and organic solvents for added durability
Single-handle design for effortless temperature and flow control
Freestanding design for a modern and luxurious look

Possible Use Cases:

Upgrading your bathroom with a stylish and practical faucet

Streamline MH2180-120

Key Features:

Acrylic surface for easy cleaning and lasting shine
Resistant to acids, alkalis, and organic solvents for added durability
Single-handle design for effortless temperature and flow control
Freestanding design for a modern and luxurious look

Possible Use Cases:

Upgrading your bathroom with a stylish and practical faucet

Installation

Everyday cleaning

Please Note : Since manufacturing

of acrylic surface baths takes a great

deal of manual labor especially in

finishing, small irregularities in the

surface are inevitable and inherent to

the chosen product/material.

Shrinkage lines, air holes and casting

marks and blemishes on the

underside of the bath (where they

cannot be seen when the bath is

turned upright) do not adversely

affect performance and should not be

regarded as defects.

It is advised to clean an acrylic

surface bath regularly, to remove any

insoluble products. Warm soapy

water should be used and then the

bath should be wiped. Do not let

cleaners soak in.

Before fitting:remove packaging and

inspect the bath.We strongly

recommend to use a professional

and qualified plumber and installer.

Instructions must be adhered to as

we cannot accept responsibility for

incorrect installation or damage

during the process.

The surface bath has good

resistance properties to acids, but

should not come into contact with

alkalis or organic solvents, such as

caustic soda, some multi-surface

cleaners, bathroom cleaners,

bleaches, harsh solvents, burning

cigarettes, strong chemicals such as

dry-cleaning fluids, paint strippers,

acetone, citrus based chemicals, and

nail/varnish removers.

acrylic

It is advised to always run some cold

water before turning on the hot tap.

With hot water temperatures not

exceeding 65 Celsius.

Used drain meets the requirement of ASME

A112.18.2/CSA B125.2 *Always follow the

appropriate plumbing code

SINGLE HANDLE FREESTANDING

TUB&SHOWER FAUCET

Screwdriver Channel Locks

Adjustable Wrench

RECOMMENDED TOOLS

Attention:

for easy installation, you will need:

1.To read all the installation instruction completely before

beginning.

2.To read all the warning, attention and maitenance

information.

Allen key

WARNING:

Please keep the

tool for future

use!

Goggles

The tools might be applied to the following places:

Teflon tape

Step 4 Cleaning and care

Daily cleaning and care are required in order to keep the product shining and

properly working.

Clean it with water and dry it with soft cloth.

Clean the product with gentle liquid or glass cleaner.

Don't use acid cleaner.

Don't clean with abrasive material, abrasive paper or knife.

Step 5 Parts list

Hammer

8 9 10

11 12 13 14 15 16 17

51 52 53 54

H-120-TFMSHCH

Step 2 Checking and testing

Step 1 Faucet installation

Step 3 Maintenance

B.If faucet leaks from the handle or drips from spout, please replace cartridge following the following steps:

80MM

Hot water

Cold water

Drill one hole of 130mmX130mm max and

drill 3 holes with 80mm diameter as shown.

Align the base① with the holes exactly as

shown.

Insert the expansion anchors① into the holes

on the base② with a hammer,tighten with

adjustable wrench.

Check all connections at arrows for leaks,

re-tighten it if necessary.

BUT DON'T OVERTIGHTEN

Remove aerator by coin and open the

hot and cold water supplies. Check for

leaks. Turn on faucet handle for one

minute to flush debris from faucet.

A.If there is splash or low flow rate,please remove the aerator with by coin and clean the debris.

1 2 3

Hot water

Cold water

Connect hot and cold supply lines and test by

opening water lines.

If there are no leaks, remove the 3 screws (1)

with the Allen key (2), then remove plate (3)

and nuts (4) as shown.

Connect hot water flexible hose(1) and cold

water flexible hose(1) to the base (2) correctly

as shown.

Insert 3 screws (1) into holes on the plate(2),

tighten with allen key(3).

Disassemble the screw② with

allenkey①, take out the handle③,

then remove the trim cap④.

Unscrew the cartridge nut① with

adjustable wrench, then take out

the old cartridge②.

Place a new cartridge in the cartridge

seat, then screw the cartridge lock nut

and assemble the handle by securing

the screws.Repeat the above steps for

the other cartridge if necessary.

Streamline MH2180-120 Installation guide

Brand: Streamline

Model: MH2180-120

Category: Sanitary ware

Type: Installation guide

Streamline MH2180-120

Key Features:

Acrylic surface for easy cleaning and lasting shine
Resistant to acids, alkalis, and organic solvents for added durability
Single-handle design for effortless temperature and flow control
Freestanding design for a modern and luxurious look

Possible Use Cases:

Upgrading your bathroom with a stylish and practical faucet

Download PDF

report

Streamline MH2180-120 Installation guide

Streamline MH2180-120 Installation guide

Related papers

Other documents