Roswell 103215-BTF-PC Installation guide

Roswell
Brand
Roswell
Model
103215-BTF-PC
Category
Sanitary ware
Type
Installation guide
Screwdriver Channel Locks
Adjustable Wrench
RECOMMENDED TOOLS
Attention:
for easy installation, you will need:
1.To read all the installation instruction completely before
beginning.
2.To read all the warning, attention and maitenance
information.
Allen key
WARNING:
Please keep the
tool for future
use!
Goggles
The tools might be applied to the following places:
Teflon tape
Step 4 Cleaning and care
Daily cleaning and care are required in order to keep the product shining and
properly working.
1
2
3
4
Clean it with water and dry it with soft cloth.
Clean the product with gentle liquid or glass cleaner.
Don't use acid cleaner.
Don't clean with abrasive material, abrasive paper or knife.
Step 5 Parts list
Hammer
SINGLE HANDLE SHOWER SET, CHROME
The product is CUPC and ADA certified.
Original certification model code: BZ20U75-1392
103215-BTF-PC
PART NAMENO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
O-ring
Spout
Connecter
O-ring
Spout Connector
O-ring
Screw
Body
Cartridge
Screw
Lock Nut
Wearing Ring
O-ring
Cartridge Cover
Handle
Screw
Handle Cover
Valve
Handle Adapter
Shower Holder
O-ring
Body Connecter
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
Check Valve
Cartridge
O-ring
Handle
Aerator
Button
Wearing Ring
Shower Hose Connector
Hose Connector Core
Screw
O-ring
O-ring
Connector Nut
Connector
Screw
Socket Wrench
Sleeve
Screw
Allen Key
Allen Key
Allen Key
Fixed Seat
O-ring
Plug
Fixed Plate
Screw
Connect Plate
Nut
O-ring
Plate
Straight Tube
Inlet Pipe
54
53
52
51
50
49
48
47
46
45
44
43
42
41
40
39
38
Aerator Wrench
55
1
2
1
Step 2 Checking and testing
Step 1 Faucet installation
1
2
Step 3 Maintenance
B.If faucet leaks from the handle or drips from spout, please replace cartridge following the following steps:
3
4
5
80MM
1
Hot water
Cold water
Drill one hole of 130mmX130mm max and
drill 3 holes with 80mm diameter as shown.
Align the base① with the holes exactly as
shown.
Insert the expansion anchors① into the holes
on the base② with a hammer,tighten with
adjustable wrench.
1
2
2
Check all connections at arrows for leaks,
re-tighten it if necessary.
BUT DON'T OVERTIGHTEN
Remove aerator by coin and open the
hot and cold water supplies. Check for
leaks. Turn on faucet handle for one
minute to flush debris from faucet.
1
A.If there is splash or low flow rate,please remove the aerator with by coin and clean the debris.
1 2 3
Hot water
Cold water
Connect hot and cold supply lines and test by
opening water lines.
If there are no leaks, remove the 3 screws (1)
with the Allen key (2), then remove plate (3)
and nuts (4) as shown.
1
2
3
4
6
7
Connect hot water flexible hose(1) and cold
water flexible hose(1) to the base (2) correctly
as shown.
1
2
Insert 3 screws (1) into holes on the plate(2),
tighten with allen key(3).
1
2
3
Disassemble the screw② with
allenkey①, take out the handle③,
then remove the trim cap④.
1
2
3
4
Unscrew the cartridge nut① with
adjustable wrench, then take out
the old cartridge②.
Place a new cartridge in the cartridge
seat, then screw the cartridge lock nut
and assemble the handle by securing
the screws.Repeat the above steps for
the other cartridge if necessary.
  • Page 1 1
  • Page 2 2

Roswell 103215-BTF-PC Installation guide

Roswell
Brand
Roswell
Model
103215-BTF-PC
Category
Sanitary ware
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents