Acclaim Lighting IN41325PN Operating instructions

Brand: Acclaim Lighting

Model: IN41325PN

Type: Operating instructions

This manual is also suitable for

IN41325ORB

Acclaim Lighting IN41325PN is a lighting fixture designed for indoor use. It can be mounted to an outlet box and requires a 120-volt power source. The fixture includes a mounting bar, backplate, socket, glass shade, spacer, socket ring, socket wrench, and mounting screws. It is recommended to use a maximum of 60-watt bulbs (not included) in the fixture. The IN41325PN is a stylish and functional lighting solution for any room in your home.

WARNING: Risk of Fire. Consult a qualified electrician to ensure correct branch circuit

conductor.

Turn off the main power at the circuit breaker before installing the fixture in order to prevent

possible shock.

All electrical connections must be in accordance with local and National Electrical Code

(N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections obtain

the services of a qualified electrician.

Remove the fixture and the mounting package from the box and make sure that no parts are

missing by referencing the illustration.

1. OUTLET BOX

2. WHITE WIRE

3. BLACK WIRE

4. GROUND WIRE

5. MACHINE SCREW

6. WIRE CONNECTOR

7. MOUNTING BAR

8. GROUND SCREW

9. HEX NUT

10. MOUNTING

SCREW

11. BACKPLATE

12. BALL NUT

13. SOCKET

14. GLASS

15. SPACER

16. SOCKET RING

17. SOCKET WRENCH

IN41325

INSTALLATION INSTRUCTIONS

Please read carefully and save these instructions, as you may need them at a later date.

CAUTION

GENERAL

ASSEMBLY AND INSTALLATION

1. Thread two machine screws (5) to the mounting bar (7) and secure with the hex nut (9).

2. Secure the mounting bar (7) to the outlet box (1) with mounting screw (10).

3. Pull out the outlet wire and ground wire from the outlet box (1). Make wire connections.

--Ribbed wire (w/o marking) or white wire from light to White wire (2) from power source.

--Smooth wire (w/o marking) or black wire from light to Black wire (3) from power source.

--Attach the ground wire (4) to mounting bar (7) with a ground screw (8).

4. Attach the backplate (11) to the outlet box (1), secure with the ball nut (12).

5. Remove the socket ring (16) from the socket (13), then place the glass (15) and

spacer (15) over the socket (13). Replace the socket ring (16) and secure in place using socket

wrench (17).

6. Install bulbs: (bulbs not include)

(Don’t exceed the maximum capacity recommended on the sockets).

INSTALLATION IS NOW COMPLETED

1500 Cherokee Parkway, Suite 100, Acworth, GA 30102

Phone: (866) 845-5451 • Fax: (866) 816-6165

E: service@acclaim-lighting.com • www.acclaim-lighting.com

Acclaim Lighting IN41325PN Operating instructions

Brand: Acclaim Lighting

Model: IN41325PN

Type: Operating instructions

This manual is also suitable for

IN41325ORB

Download PDF

report

Acclaim Lighting IN41325PN Operating instructions

This manual is also suitable for

Acclaim Lighting IN41325PN Operating instructions

Related papers

Other documents