Linear 9931T Installation guide

9931T
Linear
Brand
Linear
Model
9931T
Type
Installation guide

This manual is also suitable for

P/N 190-106406 REV B
LINEAR LLC USA & Canada (800)-421-1587 & (800)-392
-0123 www.linearcorp.com
MULTIPLE CHANNEL TRANSMITER
CODING INSTRUCTIONS
1. 8832-8833 TRANSMITTER:
1-2-3 Transmitter buttons match SWITCH #9 in the receiver.
Example: (9931 Receiver) If SWITCH #9 in the recei
ver is coded in the plus (+) position,
transmitter works from BUTTON 1 only. If SWITCH #9 is in the zero (0) position, the transmitter
works from BUTTON 2. If SWITCH #9 is in the negative (-) position, the transmitter works from
BUTTON 3.
2. When matching multiple channel transmitters to an #8832 or an #8833 receiver there is no #9 switch
in the receiver. SWITCH #9 is hard-wired internally. Therefore disregard SWITCH #9 code
settings for all multiple channel transmitters and
receivers.
3. “C” MODEL TRANSMITTERS: The A-B-C SWITCH on the front of the transmitter
matches
SWITCH #6 in the reciever. Example: If SWITCH #6
in the receiver is coded in the plus (+)
position, then the transmitter works from the “A” position only. If SWITCH #6 is in the zero (0)
position, the transmitter works from the “b” position. If SWITCH #6 is in the negative (-) position,
the transmitter works rom the “C” position.
4. To match a #9931 receiver with a model #8832, 8832C, 8833 or 8833C transmitter, set the receiver
switches as follows:
TRANSMITTER
MODELS
1 2 3
4
5
6
7
8 9
8832 CH-1
•
•
• • • • • • +
CH-2
• • • • • • • •
0
A1
•
•
• • • +
•
• +
A2
•
•
•
•
• +
•
•
0
8832C B1
• •
•
•
•
0
•
•
+
B2
• • • •
•
0
• •
0
C1
• • • • • − • • +
C2
•
•
• • • − • •
0
CH-1
• • • •
•
• • • +
8833 CH-2
• •
•
•
•
• • •
0
CH-3
• • • •
•
• • • −
A1
•
•
•
•
• +
•
• +
A2
•
•
•
•
• +
•
•
0
A3
• •
•
•
• +
•
• −
B1
• •
•
•
•
0
• • +
8833C B2
• • • • •
0
• •
0
B3
•
•
• • •
0
• • −
C1
•
•
•
•
• −
•
• +
C2
• •
•
•
• −
•
•
0
C3
• • • •
•
− • • −
MODEL 9931 RECEIVER
CODE SWITCHES
A.
POSITIONS MARKED WITH AN •
SHOULD
BE SET TO THE SAME RANDOM CUSTOMER
CODE FOR ALL RECEIVERS AND
TRANSMITTERS.
B. FOR THE MOST EFFICIENT OPERATION THESE
SWITCHES SHOULD NOT BE SET ALL “+“ OR
ALL “
−
“, BUT TO A RANDOM CODE SELECTED
BY THE CUSTOMER OR INSTALLER.
NOTES:
  • Page 1 1

Linear 9931T Installation guide

9931T
Linear
Brand
Linear
Model
9931T
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents