Arkon GN111 User manual

Category
Holders
Type
User manual

Arkon GN111 is a sun visor mount designed to securely hold your Garmin GPS device. It features a dual T to 17mm ball adapter plate, allowing for easy adjustment and viewing angles. The mount can be attached to the passenger side sun visor for optimal visibility and minimal obstruction of the driver's view. It is compatible with various Garmin Nüvi and StreetPilot models, providing a stable platform for your GPS device.

Arkon GN111 is a sun visor mount designed to securely hold your Garmin GPS device. It features a dual T to 17mm ball adapter plate, allowing for easy adjustment and viewing angles. The mount can be attached to the passenger side sun visor for optimal visibility and minimal obstruction of the driver's view. It is compatible with various Garmin Nüvi and StreetPilot models, providing a stable platform for your GPS device.

Package Contents:
(1) CM011-2 - Sun visor mount
(1) AP2T17MM - Dual T to 17mm ball adapter plate
Compatible with:
Garmin
• Nüvi - 200, 200w, 205, 205w, 250, 250w, 255, 255w, 260, 260w, 270, 300, 300T, 310, 310T, 350, 360, 360T,
370, 370T, 600, 610, 650, 660, 670, 680, 710, 750, 760, 760T, 770, 780, 850, 860, 880, and 5000 models
StreetPilot - c310, c510, c530, c550, and c580 models
!
Dual T to 17mm Ball Mount Installation for Garmin
Step 1. Slide the dual T slots on ball adapter plate on to the dual T
tabs on the sun visor mount.
Step 1. Attach the device cradle to the pedestal by inserting the
17mm ball into the Garmin cradle cavity (Not included
- sold separately). Finish by connecting the car charger
cords from the 12V lighter socket up to your device. (Not
included - sold separately)
17mm Ball Device and Pedestal Adjustment for Garmin
Garmin brand name and Nüvi and StreetPilot
product names are trademarks or registered
trademarks of Garmin International. Arkon
Resources, Inc. is not a liated with Garmin Intl.
AP2T17MM
Adapter Plate
For Garmin
Patents Pending
Note: Arkon strongly recommends using the
visor mount on the passenger side sun visor.
Using this mount on the driver’s side visor will
reduce the driver’s view of the road.
Do not place device car charger cords in or near
an air bag deployment zone.
!
Safety Precautions
Follow all manufacturer safety guidelines for operating your device.
Failure to practice safe usage of GPS device while driving may result
in damage, injury, or death.
Arkon is not responsible for any damages caused to your car, your
device, or yourself due to the installation or use of this pedestal mount.
G N111
|
Sun Visor Mount for Garmin GPS Devices
The Mobile Mounting Specialists
www.arkon.com
Arcadia, CA 91006 USA
Designed in USA
|
Made in China
© Copyright 2008 Arkon Resources, Inc.
Consumer Hotline:
(USA) (800) 841-0884
(INT’L) (626) 254-9005
Mon-Fri. 9am-5pm, PST
Sun Visor Mounting
Lower the passenger side sun visor and place the clip
mount over the top of the visor. Slide the mount left or
right to adjust the location on the visor.
Step 1.
®
CM011-2
Sun Visor Mount
Power
cable
  • Page 1 1

Arkon GN111 User manual

Category
Holders
Type
User manual

Arkon GN111 is a sun visor mount designed to securely hold your Garmin GPS device. It features a dual T to 17mm ball adapter plate, allowing for easy adjustment and viewing angles. The mount can be attached to the passenger side sun visor for optimal visibility and minimal obstruction of the driver's view. It is compatible with various Garmin Nüvi and StreetPilot models, providing a stable platform for your GPS device.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI