2. Atlas
  3. AT306006842
AT306006842

Atlas AT306006842 User manual

  • Hello, I'm your chat assistant. I've reviewed the user manual for the Cabinet Mounted Household Energy Storage Series. This document provides step-by-step instructions for the installation process, including system wiring, battery placement, and power module assembly. I'm ready to assist you with any questions you may have about setting up your device.
  • How do I secure the battery to the rack?
    What is the order of installation?
    How do I connect the key switch?
Cabinet installation operation manual
1.System wiring diagram
2.The installation guide
DC contac tor
P+ Busbar P- Busbar
FUSE
wireles s kit
Battery
MCB
The fan pos ition
2.1 Lock the tray to the rack of the cabinet from bottom to top. When installing multiple
batteries, the installation tray ensures accurate installation of each battery. (Leave
some gaps between each battery layer to facilitate heat dissipation)
2.2 Place the battery on the tray with a forklift or other tools.
2.3 Tighten the nut to the empty position of the battery installation port.
2.4 Fasten the battery with screws. (It doesn't matter if the holes in the battery aren't
damaged. The main function of the screw here is to avoid displacement of the chassis.
At least ensure that there is one screw on the left and one screw on the right)
2.5 Install the power module.
2.6 After installation Assemble the power cables according to the wiring diagram.
(MCB is disconnected)
2.7 Install the RS485 parallel communication cable.
2.8 Compile the physical address according to the DIP switch in the Cabinet Mounted
Household Energy Storage Series User Manual.
on the DC contactor and the negative bus bar.
2.11 Install the positive and negative poles of the fan onto the positive and negative bus
bars.
http://www.atlaspowersolutions.com
1-435-233-6115
2.10 Connect the positive and negative wires of the key switch to the positive signal pole
2.9 Install the Key Switches on the Cabinet Door.
/