2. PREMIER 1
  3. 540055
540055

PREMIER 1 540055 User manual

  • Hello! I'm your document assistant. I've reviewed the user manual for Premier1Supplies Galvanized Cone Feeders, models 540055, 540056, and 540067. The document provides clear instructions on assembling the feeder, including attaching the hinge and securing the cone to the base. I'm ready to answer any questions you may have about setting up your feeder.
  • How do I attach the hinge to the trough?
    How do I position the cone onto the base?
    How do I secure the cone to the base?
© Copyright 2022, Premier1Supplies. All rights reserved.
Galvanized Cone Feeders
Attaching the hinge
1. Insert hinge into slot
at base of trough.
2. Insert screw through
hinge into trough.
3. Secure hinge and
screw via wingnut.
Attaching cone to base
4. Position cone base
into two of the
adjustment hinges.
Lip of the cone
should fit into
their cutouts.
5. Twist the cone until
the seam lines up
with the empty
hinge. Press into the
base of the cone with
your thumbs, while
pushing on the side
of the trough with
your fingers. The
seam will flex
inward to catch
under the hinge.
6. Adjust the rest of the
feeder base to the
desired height.
#540055, 540056, 540067
800-282-6631 | www.premier1supplies.com
1. 2. 3.
seam
adjustment hinge
(3 total)
lip
4. 5. 6.
Bottom side
of base
/