Active Ventilation Products RSV-4-WT(36) Installation guide

78"

Active Ventilation Products, Inc.

Website: roofvents.com Email: [email protected]

Installation Instructions 8/30/2022

Round Soffit Vent Model: RSV-4 Diameter: 4"

1. Cut a 4" hole into the soffit using a hole saw.

2. Insert the vent into the hole in the soffit.

3. Attach the mounting plate onto the soffit using 4 screws

to secure the soffit vent in place.

* Make sure the opening of the louvers are facing the house

** Recommended Screw: #8 x 1" Sheet Metal Screw

(Screws not included)

Round Soffit Vent Installation Instructions

Round Soffit Vent Flashing Detail

Angled View

Side View Mounting Plate

Screw

Soffit

Soffit Vent

Wall

Roof Rafter

- Net Free Area (NFA) = 3.50 sq in

This manual is also suitable for

Download PDF