2. Active Ventilation Products
  3. RSV-2-WT(36)
RSV-2-WT(36)

Active Ventilation Products RSV-2-WT(36), RSV-2-WT(6), RSV-4, RSV-4-WT(36), RSV-4-WT(6) Installation guide

  • I have analyzed the provided installation instructions for the Soffit Vent RSV-4. This document details the steps for proper installation, including cutting the hole, inserting the vent, and securing it with screws. I'm ready to answer any questions you may have about the installation process or the product itself.
  • What size hole should be cut for installation?
    How many screws are needed to install the mounting plate?
    What kind of screws are recommended?
4"
78"
5"
Active Ventilation Products, Inc.
Website: roofvents.com Email: [email protected]
Installation Instructions 8/30/2022
Round Soffit Vent Model: RSV-4 Diameter: 4"
1. Cut a 4" hole into the soffit using a hole saw.
2. Insert the vent into the hole in the soffit.
3. Attach the mounting plate onto the soffit using 4 screws
to secure the soffit vent in place.
* Make sure the opening of the louvers are facing the house
** Recommended Screw: #8 x 1" Sheet Metal Screw
(Screws not included)
Round Soffit Vent Installation Instructions
Round Soffit Vent Flashing Detail
Angled View
Side View Mounting Plate
Screw
Soffit
Soffit Vent
Wall
Roof Rafter
- Net Free Area (NFA) = 3.50 sq in
/