Quoizel APL1716MBK Installation guide

Type
Installation guide
-of-14
Please read and understand this entire manual before attempting to assemble, install or operate the product.
WARNING
RISK OF ELECTRIC SHOCK - Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
RISK OF FIRE - Use bulbs specified by the markings and/or labels on the fixture.
CAUTION
For your safety, read instructions completely before beginning installation.
If in doubt about electrical installation, consult a licensed electrician.
Turn off electricity to fixture before replacing the bulb(s).
TOOLS REQUIRED
CARE AND MAINTENANCE
SAFETY INFORMATION
PACKAGE CONTENTS
MOUNTING HARDWARE
Ceiling Canopy
with Rod
x 1
Swivel
x 1
12"L Rod
x 2
6"L Rod
x 2
Crossbar Assembly
x 1
Outlet Box Screw
x 2
Wire Connector
x 3
Fixture Body
x 1
Stem
x1
A
AA BB CC
B
C
D
E
J
INSTALLATION GUIDE
FOR APL1716MBK and APL2816MBK
Released Date: 202 -3 01-12
Rubber Washer
x2
G
Hex Nut
x 1
H
Finial
x 1
I
Flat Washer
x2
F
Diffuser
x 1
K
Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage
the finish.
If you need further assistance call Quoizel Customer Care at 1-800-645-3184 (9:00am - 5:00pm EST), or visit us on-line at
www.quoizel.com.
-of-24
3
Install Crossbar Assembly
4
Wiring
5
Install Ceiling Canopy to Crossbar Assembly
Your installation is now complete! Restore electricity and save this sheet for future reference.
12
Install Diffuser
* Set aside the swivel, (2) 6"L Rods and (2) 12"L Rods since they are not required for the semi-flush installation.
INSTALLATION
OPTION : SEMI-FLUSH: APL1716MBK1
Ceiling Canopy with Rod to
Fixture Body
Install Bulbs
6
Install correct bulbs referring totwo
fixture markings and/or labels for
maximum wattage.
Recommended Bulb type (not
included):
White wire from supply White from fixture
Black (or red) wire from supply Black from fixture
Ground wire from supply
Ground wire
from fixture
Green ground screw
Flat Washer
Rubber Washer
Rubber Washer
Flat Washer
BULB BASE TYPE
Medium (E26)
BULB TYPE
TYPE A
100W
MAX
-of-34
3
Separate Rod from Ceiling
Canopy
4
Install Swivel to Ceiling
Canopy
6
Install Crossbar Assembly
12
Install Rods
Optional Rods:
8 Feet Ceiling:
(2) 12"L Rods.
9 Feet Ceiling:
(2) 6"L Rods + (2) 12"L Rods.
INSTALLATION
OPTION : PENDANT:2 APL2816MBK
Install Ceiling Canopy to Upper
Rod
5
Install Diffuser
Flat Washer
Rubber Washer
Rubber Washer
Flat Washer
Wiring
7
White wire from supply White from fixture
Black (or red) wire from supply Black from fixture
Ground wire from supply
Ground wire
from fixture
Green ground screw
Set aside the rod
since it is not
required for this
installation.
-of-44
Your installation is now complete! Restore electricity and save this sheet for future reference.
INSTALLATION
Install Ceiling Canopy to Crossbar Assembly
For angled ceilings,
swivel opening towards wall.
8
90Degree Swivel
Install Bulbs
Install two correct bulbs referring to
fixture markings and/or labels for
maximum wattage.
Recommended Bulb type (not
included):
9
BULB BASE TYPE
Medium (E26)
BULB TYPE
TYPE A
100W
MAX
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Quoizel APL1716MBK Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI