2. Sygonix
  3. 2612391
2612391

Sygonix 2612391 Operating instructions

  • Hello! I have analyzed the provided dismantling instructions for the LED strip 2612391, and I am ready to assist you with any questions related to disassembling this device. The document provides a step-by-step process including removing screws, detaching panels, desoldering components, and removing the light source.
  • What is the first step in dismantling the LED strip?
    What should I do after removing the housing cover screws?
    What is the next step after detaching the front panel?
    How many screws need to be removed from the light source board?
    What is the final step in dismantling the LED strip?
1
Dismantling Instructions
Flexible LED strip
Item no: 2612391
1 Dismantling recommendations
■Disconnect from power supply.
■Ask help from a professional if needed.
2 Dismantling instructions
Step 1
Remove 6pcs screws from the housing cover.
Step 2
Remove the front panel.
Step 3
Desolder the cables and light source board.
Step 4
Remove 4pcs screws from the light source board.
Step 5
Remove light source.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2612391_V1_1022_hs_en 694714635 I1/O1 en
/