2. Angelo Decor
  3. AD95816

Angelo Decor AD95816 Operating instructions

  • Hello! I've reviewed the user manual for the Angelo Décor Fountain CobaAD95816en. This document includes instructions on setting up the fountain, connecting the light, attaching the pump, and correctly placing the transformer. It also provides important information about water levels and proper storage for winter. I'm here to answer any questions you have about your fountain.
  • Where can I find assistance if I encounter issues?
    Should the transformer be fully submerged in water?
    How full should I fill the bowl with water?
Thank you for buying an Angelo Décor Fountain!
We hope you will find these instructions helpful in setting up your fountain.
If you have any issues with this item, please DO NOT return the unit to place of purchase.
Please visit our web site, www.angelodecor.com, for assistance and warranty information.
First unpack carton carefully, arranging parts safely in your working area.
Locate the light and tubing
shown above. Pass the tubing and light cord through the
opening at the top. Connect the light cord
to the pump as shown.
Pump is set to full.
Reduce flow if lower
splash is desired.
Now simply fill with clean water and plug into a grounded GFCI outlet
We recommend keeping bowl 3/4 full of water to avoid pump burnout.
Product must be properly stored for winter.
Attach the tubing to the pump. Attach the cord to the transformer. Ensure it is
tight. Place the transformer in a safe area, preferably under cover. While this
unit is rated for outdoor use, it should not be fully submersed in the water.
Install the pump access door. the cord should pass
through as shown above right.
Final Assembly should
look like this
/