DT Research DT430SC Basic Operation Guide
- Category
- POS terminals
- Type
- Basic Operation Guide
DT Research DT430SC
DT Research DT430SC is a handheld POS terminal featuring a 4.3” outdoor-viewable display, packed in a compact, rugged, and lightweight body. It is IP54-rated for water and dust resistance, with an IP65 sealed front panel, making it suitable for both indoor and outdoor use, even in harsh environments.
Data Capture
- RFID reader: Supports ISO 15693, 14443A (B), and 18000-3 mode-1 protocols, with a reading range of within 30mm depending on the type of tags.
DT Research DT430SC
DT Research DT430SC is a handheld POS terminal featuring a 4.3” outdoor-viewable display, packed in a compact, rugged, and lightweight body. It is IP54-rated for water and dust resistance, with an IP65 sealed front panel, making it suitable for both indoor and outdoor use, even in harsh environments.
Data Capture
- RFID reader: Supports ISO 15693, 14443A (B), and 18000-3 mode-1 protocols, with a reading range of within 30mm depending on the type of tags.
DT430SC
ENGLISH
Handheld POS Terminal
BASIC OPERATION GUIDE
DT430SC
ENGLISH
4
signage dtri com
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131 hp://www.dtresearch.com
Copyright © 2012, DT Research, Inc.
All Rights Reserved. DT Research is a registered trademark of DT Research, Inc.
INTRODUCTION
Thank you for acquiring the DT430SC, part of the POS
Handheld line. The
DT430SC offers a 4.3
”
outdoor-
viewa
ble display, in a compact, rugged, and lightweight package. The DT430SC enables
effi
cient point-of-service applicaons, inventory management, and field services. IP54
rate
d for water and dust resistance with IP65 sealed front panel, the DT430SC performs
indoors
, outdoors, and in harsh environments.
The DT
430SC Point-of-Service Handheld provides the precise features needed to
st
reamline operaons and improve producvity, data accuracy, and service.
PACKAGE CONTENTS
O
1. ne
DT430SC
O
2. ne
b
ae
ry pack
Basic opera
on guide3.
Stylus lanya
rd and hand strap
4.
The actual package contents may vary depending on the configuraon acquired. *
PRECAUTIONS
Always exercise care when operang and handling the DT430SC.•
Do not disassemble any
poron of the DT430SC. It will void any product warranty on •
DT
430SC.
Do not use any
power adapter or charging cradle other than the one provided with the •
dev
ice or acquired from the manufacturer or its partners.
In the
unlikely event that abnormal noise, strange odor, or smoke is present, •
immed
iately power down the DT430SC and disconnect all power sources. Please
re
port the problem to your device provider immediately.
BOG081012DT430SCENG
DATA CAPTURE SPECIFICATIONS:
RFID
Frequency 13.56MHz
±
7KHz
Re
ading Range within 30mm depending on type of tags
Pro
tocol ISO 15693, 14443A (B) and 18000-3 mode-1
Barcode Scanner (1D)
Decoded Mode
Code128,
EAN-13, EAN-8, Code-39, UPC-A, UPC-E, Codabar,
Interleaved 2 of 5, ISBN/ ISSN, Code93. etc
Sca
n Rate Up to 300 scans/ sec
Sca
n Angle Horizontal: 42
°
Print
Contrast ≥ 30%
Barcode Scanner (2D)
Decode Mode
1D: EA
N/UPC, GS1 Databar, RSS, Code 39, Code 128, UCC/ EAN
128, ISBN, ISBT, Interleaved, Matrix, Industrial and Standard 2 of 5,
Codabar, Code 93/93i, Code 11, MSI, Plessey, Telepen, postal codes.
(Australian Post, BPO,Canada Post, Dutch Post, Japan Post, PostNet,
Sweden Post )
2D: Data Matrix, PDF417, Micro PDF 417, Codablock, Maxicode, QR,
Aztec, GS1 Composite codes, Direct Part Marking Reading mulcodes
and barcodes on mobile phone screens available.
Sca
n Rate 1D: 120 fps, 2D: 60 fps
Sca
n Angle Horizontal: 34.4
°
; Vercal: 22.2
°
Op
cal Resoluon 752 (H) x 480 (V) pixels
Print
Contrast Down to 30%
* Specificaons subject to change without noce.
DT430SC
ENGLISH
2
3
ENGLISH
ACCESSORIES:
Right
Top
Le
Boom
A
C
B
Programmable buons
Suspend/ Resume
Speaker
Powe
r buon
Bae
ry
Baery pack switch
RFID reader (oponal)
A
B
C
D
E
F
F
Enable/ disable so
key
board (Programmable)
Pro
grammable
Syste
m Ulity
Suspen
d/ Resume
Touch screen calibraon
D
E
F
G
Cradle connector
Scanner sensor (oponal)
Stylus
Scanner trigger buon
Scanner trigger buon
Audio jack
DC-in
USB 1.1 host
DT430SC
DT430SC I/O Ports
DT
430SC LED Status Indicators
1. Power Mode Status Indicator:
2. Wi-Fi Status Indicator:
Blue: Dev
ice is powered on•
Blinking Blue: Main baery charging•
Orange: Low baery mode•
Blinking Orange: Extremely low baery •
mode
Off: Device is powered off or in suspend •
mode
Blue: The dev
ice has been connected to a wireless AP•
Blinking blue: The device is connecng to a wireless AP•
Off: Wi-Fi is disabled•
1
2
Charging Cradle PN: ACC-400-01
Desktop cradle with rear pocket baery charger and data synchronizaon
with PC via USB port.
Input: 100 - 240V AC; output: 5V DC, 3A.
Baery PN: ACC-400-04
Hot-
swappable, rechargeable Li-Ion baery 3760mAh, 3.7V (14 Wa-hour).
Trigger Grip PN: ACC-400-05
For single handed operaon to trigger scanner or other funcons
conveniently.
4-bay Gang Charger PN: ACC-430-02
Wall mountable charger, capable of charging up to 4 handhelds
simultaneously.
AC-DC Adapter PN: ACC-400-03
Used to charge handheld baery, and pass through power for charging
cradle.
+
Hold press
Button Functions
SPECIFICATIONS
System
Processor
ARM 800 MHz
RAM
512MB
Sto
rage
4GB Flash
Opera
ng System
Micro
so® Windows® CE 6.0 or Windows® Mobile 6
Display
4.3
”
TFT-LCD with resisve touch; outdoor-viewable display
Display
Resoluon
272 x 480 (WQVG
A)
Net
work Interface
Built-
in IEEE 802.11a/b/g/n WLAN, Bluetooth 2.1 with EDR
Control Switch and Buons
1 powe
r buon; 4 front buons; 2 trigger buons
Indicato
r
1 powe
r-on LED indicator, 1 WLAN enable/ communicaon indicator
Speake
r/ Microphone Built-in speakers; 1 mono microphone
Input/Output Po
rts
1 headset
jack, 1 USB 1.1 host, 1 cradle interface (USB2.0 and charging), 1 DC-in jack
Power
AC/DC Adapter
Input: 100 – 240V AC
; Output: 5V DC, 3A
Ba
ckup Baery
180 mAh
Bae
ry Type
Li-io
n baery 3760 mAh, 3.7V
Mechanical
Enclosure
PC+ABS,
TPR
Stylus No
n-electronic p
Dimensions (H x W x D)
6.3 x 3.4 x 1.2 in/ 160 x 86 x 30 mm
Weight
0.9 lbs
/ 415 g
Environmental
Regulatory
FC
C Class B, CE, C-Tick, UL, CB, RoHS compliant
Wate
r and Dust Resistance System: IP54; Front Panel: IP65
Opera
ng Temperature Operaon: 0
°
C - 40
°
C; Storage: -20
°
C - 60
°
C
Humidity 0% - 90% non-co
ndensing
* Specificaons subject to change without noce.
-
1
-
2
DT Research DT430SC Basic Operation Guide
- Category
- POS terminals
- Type
- Basic Operation Guide
DT Research DT430SC
DT Research DT430SC is a handheld POS terminal featuring a 4.3” outdoor-viewable display, packed in a compact, rugged, and lightweight body. It is IP54-rated for water and dust resistance, with an IP65 sealed front panel, making it suitable for both indoor and outdoor use, even in harsh environments.
Data Capture
- RFID reader: Supports ISO 15693, 14443A (B), and 18000-3 mode-1 protocols, with a reading range of within 30mm depending on the type of tags.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
DT Research DT415 Specification
-
DT Research DT418SC-MD Specification
-
DT Research GC590 Basic Operation Guide
-
-
-
DT Research DT410 Specification
-
DT Research DT307SC User manual
-
-
DT Research DT390MD Specification
-
Other documents
-
CipherLab CP60 Reference guide
-
CipherLab CP55 Reference guide
-
CipherLab 9700 Reference guide
-
-
Psion Teklogix 7525C User manual
-
Psion Teklogix WORKABOUT PRO 7527S-G2 User manual
-
Handheld Nautiz X4 User manual
-
-
AML M7225 User manual
-
