Artesyn iVPX7225 RTM Quick start guide

Artesyn
Brand
Artesyn
Model
iVPX7225 RTM
Category
Network equipment chassis
Type
Quick start guide

Artesyn iVPX7225 RTM is a transition module that provides a means of interfacing legacy PMC/XMC modules to VPX systems.

Designed for harsh environments, the iVPX7225 RTM supports a wide range of operating temperatures and power requirements, making it ideal for use in applications such as military, aerospace, and industrial automation.

The iVPX7225 RTM features:

  • Support for legacy PMC/XMC modules
  • VPX system interface
  • Rugged construction
  • Wide operating temperature range
  • Low power consumption

With its rugged construction and wide operating temperature range, the iVPX7225 RTM is ideal for use in harsh environments. Its low power consumption makes it ideal for use in applications where power is limited.

Artesyn iVPX7225 RTM is a transition module that provides a means of interfacing legacy PMC/XMC modules to VPX systems.

Designed for harsh environments, the iVPX7225 RTM supports a wide range of operating temperatures and power requirements, making it ideal for use in applications such as military, aerospace, and industrial automation.

The iVPX7225 RTM features:

  • Support for legacy PMC/XMC modules
  • VPX system interface
  • Rugged construction
  • Wide operating temperature range
  • Low power consumption

With its rugged construction and wide operating temperature range, the iVPX7225 RTM is ideal for use in harsh environments. Its low power consumption makes it ideal for use in applications where power is limited.

iVPX7225 RTM
Quick Start Guide
P/N:6806800S36B (April 2015)
Observe ESD-safe
measures
What’s in the box?
Install the RTM
When installing or servicing the
module or accessories, strictly
observe the safety precautions in
the Safety Notes Summary. Other-
wise, personal injury or property
damage may occur.
• Use either a properly grounded ESD wrist
strap or make sure that you are working
in an ESD-safe environment.
• Connect your ESD wrist strap to the ESD
connector at the front or the rear of the
system.
Make sure you receive all items of your
shipment:
• One iVPX7225 RTM
• One printed copy of Quick Start Guide
(this document)
• One printed copy Safety Notes Sum-
mary
• Any other optional items ordered.
1
2
4
1. Turn off all equipment power and
then disconnect the power cable
from the power source.
2. Remove the chassis cover as
instructed in the equipment user's
manual.
3. Remove the filler panel(s) from the
appropriate card slot(s) at the rear of
the chassis (if the chassis has a rear
card cage).
4. Slide the top and bottom edge of
the transition module into the rear
guide rails of the chassis.
5. Ensure that the lever of the injector/
ejector is in the outward position.
6. Slide the transition module into the
chassis until resistance is felt.
7. Move the injector/ejector lever in an
inward direction.
8. Verify that the transition module is
properly seated and secure it to the
chassis using the two screws located
at the edges of the face plate.
9. Connect the appropriate cables to
the transition module.
Prepare the installation
site
• For information on the environmen-
tal and power requirements, see the
iVPX7225 RTM Installation and Use
manual.
• Operating temperatures refer to the
temperature of the air circulating
around the blade and not to the
actual component temperature.
3
iVPX7225 RTM-Quick Start Guide
Artesyn Embedded Technologies
Marketing Communications
2900 S. Diablo Way, Suite 190
Tempe, Arizona 85282
Artesyn Embedded Technologies
Lilienthalstr. 17-19
85579 Neubiberg/Munich
Germany
Finding more information
For more information on the product, see
the iVPX7225 RTM Installation and Use and
other related documentation.
Go to www.artesyn.com/computing/sup-
port/product/technical-documenta-
tion.php for technical documentation.
Technical Assistance
For technical assistance, visit http://crcpor-
tal.artesyn.com/
  • Page 1 1
  • Page 2 2

Artesyn iVPX7225 RTM Quick start guide

Artesyn
Brand
Artesyn
Model
iVPX7225 RTM
Category
Network equipment chassis
Type
Quick start guide

Artesyn iVPX7225 RTM is a transition module that provides a means of interfacing legacy PMC/XMC modules to VPX systems.

Designed for harsh environments, the iVPX7225 RTM supports a wide range of operating temperatures and power requirements, making it ideal for use in applications such as military, aerospace, and industrial automation.

The iVPX7225 RTM features:

  • Support for legacy PMC/XMC modules
  • VPX system interface
  • Rugged construction
  • Wide operating temperature range
  • Low power consumption

With its rugged construction and wide operating temperature range, the iVPX7225 RTM is ideal for use in harsh environments. Its low power consumption makes it ideal for use in applications where power is limited.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents