Barrel Roasting Oven
Installation and Operation Manual
An ongoing program of product improvement may require us to change
specifications without notice. WS-BRO, Revised September 2015
[email protected] or visit woodstone-corp.com
Wood Stone Corporation
1801 W. Bakerview Rd.
Bellingham, WA 98226 USA
Toll Free 800.988.8103
Tel 360.650.1111
Fax 360.650.1166
Side view
Plan view (with lid)
Front view
Plan view (without lid)
SPECIFICATIONS
REV:
LEGEND:
PART #:
WS-BRO
Barrel Roasting Oven
General Arrangement
5/1/2013
bena
0
DWN BY:
SHEET:
Bellingham, WA 360/650-1111 www.woodstone-corp.com
DIMENSIONS ARE IN INCHES
TOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°
UNLESS NOTED OTHERWISE
\\woodstone.net\dfs\CAD\0 Pn\WS Top Level\WS-BRO_General_Arrangement-1.dft
THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF WOOD STONE CORPORATION
ANY REPRODUCTION OR USE IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF WOOD STONE IS
PROHIBITED
AN ONGOING PROGRAM OF PRODUCT IMPROVEMENT
MAY REQUIRE US TO CHANGE SPECIFICATIONS
WITHOUT NOTICE.
DATE:
1 of 1
D
67 3/4"
1720mm
34 1/2"
870mm
17"
430mm
62 1/4"
1580mm
14 1/2"
370mm
28"
710mm
7 1/2"
190mm
22 1/2"
570mm
44 1/4"
1120mm
38"
970mm
77 1/4"
1960mm
33"
840mm
32 1/4"
820mm
O
25 3/4"
650mm
Opening
Lid Support May Be Rotated
To Any Final Configuration
Prior To Application Of Stucco
D
2" Drain (Drain Pipe Provided)
REV:
LEGEND:
PART #:
WS-BRO
Barrel Roasting Oven
General Arrangement
5/1/2013
bena
0
DWN BY:
SHEET:
Bellingham, WA 360/650-1111 www.woodstone-corp.com
DIMENSIONS ARE IN INCHES
TOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°
UNLESS NOTED OTHERWISE
\\woodstone.net\dfs\CAD\0 Pn\WS Top Level\WS-BRO_General_Arrangement-1.dft
THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF WOOD STONE CORPORATION
ANY REPRODUCTION OR USE IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF WOOD STONE IS
PROHIBITED
AN ONGOING PROGRAM OF PRODUCT IMPROVEMENT
MAY REQUIRE US TO CHANGE SPECIFICATIONS
WITHOUT NOTICE.
DATE:
1 of 1
D
67 3/4"
1720mm
34 1/2"
870mm
17"
430mm
62 1/4"
1580mm
14 1/2"
370mm
28"
710mm
7 1/2"
190mm
22 1/2"
570mm
44 1/4"
1120mm
38"
970mm
77 1/4"
1960mm
33"
840mm
32 1/4"
820mm
O
25 3/4"
650mm
Opening
Lid Support May Be Rotated
To Any Final Configuration
Prior To Application Of Stucco
D
2" Drain (Drain Pipe Provided)
REV:
LEGEND:
PART #:
WS-BRO
Barrel Roasting Oven
General Arrangement
5/1/2013
bena
0
DWN BY:
SHEET:
Bellingham, WA 360/650-1111 www.woodstone-corp.com
DIMENSIONS ARE IN INCHES
TOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°
UNLESS NOTED OTHERWISE
\\woodstone.net\dfs\CAD\0 Pn\WS Top Level\WS-BRO_General_Arrangement-1.dft
THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF WOOD STONE CORPORATION
ANY REPRODUCTION OR USE IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF WOOD STONE IS
PROHIBITED
AN ONGOING PROGRAM OF PRODUCT IMPROVEMENT
MAY REQUIRE US TO CHANGE SPECIFICATIONS
WITHOUT NOTICE.
DATE:
1 of 1
D
67 3/4"
1720mm
34 1/2"
870mm
17"
430mm
62 1/4"
1580mm
14 1/2"
370mm
28"
710mm
7 1/2"
190mm
22 1/2"
570mm
44 1/4"
1120mm
38"
970mm
77 1/4"
1960mm
33"
840mm
32 1/4"
820mm
O
25 3/4"
650mm
Opening
Lid Support May Be Rotated
To Any Final Configuration
Prior To Application Of Stucco
D
2" Drain (Drain Pipe Provided)
REV:
LEGEND:
PART #:
WS-BRO
Barrel Roasting Oven
General Arrangement
5/1/2013
bena
0
DWN BY:
SHEET:
Bellingham, WA 360/650-1111 www.woodstone-corp.com
DIMENSIONS ARE IN INCHES
TOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°
UNLESS NOTED OTHERWISE
\\woodstone.net\dfs\CAD\0 Pn\WS Top Level\WS-BRO_General_Arrangement-1.dft
THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF WOOD STONE CORPORATION
ANY REPRODUCTION OR USE IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF WOOD STONE IS
PROHIBITED
AN ONGOING PROGRAM OF PRODUCT IMPROVEMENT
MAY REQUIRE US TO CHANGE SPECIFICATIONS
WITHOUT NOTICE.
DATE:
1 of 1
D
67 3/4"
1720mm
34 1/2"
870mm
17"
430mm
62 1/4"
1580mm
14 1/2"
370mm
28"
710mm
7 1/2"
190mm
22 1/2"
570mm
44 1/4"
1120mm
38"
970mm
77 1/4"
1960mm
33"
840mm
32 1/4"
820mm
O
25 3/4"
650mm
Opening
Lid Support May Be Rotated
To Any Final Configuration
Prior To Application Of Stucco
D
2" Drain (Drain Pipe Provided)
5
Venting
This oven may be vented with a Listed Type 1 exhaust hood or one constructed in
accordance with NFPA 96 and all relevant local and national codes. The oven must
be vented in accordance with all relevant local and national codes, and in a manner
acceptable to the authority having jurisdiction.
IMPORTANT: This model must be vented as a solid fuel appliance.
Shipping weight: 3,300 lbs.
Grease Drain
UTILITY SPECIFICATIONS
Drain to Floor Sink (grease trap)
A 1-1/2" drain outlet tube at the bottom of the oven is provided.
This outlet must be connected to an indirect waste pipe and
discharge by means of an air gap in accordance with all
applicable plumbing codes. The indirect waste pipe should
discharge into a drain system that is serviced by a grease trap.
GENERAL ARRANGEMENT
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Wood Stone WS-FD-(9690, 11275, 11290) Operating instructions
-
Wood Stone WS-FD-(9690, 11275, 11290)-CL Operating instructions
-
Wood Stone WS-BL-(3030, 4343, 4355, 4836)-RFG Operating instructions
-
Wood Stone WS-TS-5,6-RFG-(IR)-(W) Operating instructions
-
Wood Stone WS-TS-5,6-W Operating instructions
-
Wood Stone WS-GFR-(6, 10) Operating instructions
-
Wood Stone WS-GFR-(6, 10)-MB Operating instructions
-
Wood Stone WS-FD-(9660, 11260)-CL Operating instructions
-
Wood Stone WS-FD-(9660, 11260) Operating instructions
-
Wood Stone WS-GFT-31 Operating instructions
