©2009 König®. All rights reserved. König® is a registered trademark.

Specifications are subject to modification without prior notice. Contents may differ slightly from what is shown.

König can not be held responsible, nor liable for the information contained in this document.

Professional Camera Tripod

Ballhead mounting

General information:

Camera tripod with individually adjustable legs. The typical

regulating design of the elevator offers different damping

effects depending on the weight of your camera. With the

• Folded length: 560 mm

• Load capacity: 3 kg

• Leg stages: 4

• Leg material: Aluminum

• Leg diameter: 23 mm/19.8 mm/ 16.8mm/ 13.8mm

• Leg lock: Yes

• Independent leg spread: 22°

• Center column sections: 2

• Center column type: Round

• Center brace: 2 Sections

• Carrying bag

USPs

• Regulating design of the elevator

• 2-Section center column

• Easily foldable legs

Quantity L x W x H (mm) Weight

Single: per piece 125 x 120 x 565 1920 gr

Master: 4 pcs 260 x 270 x 610 8340 gr

EAN code: 5412810121892