König & Meyer 26200-300-55 Datasheet

26200

One-Hand Microphone Stand »Elegance«

Product variant

26200-300-55 - black

Data

Base diameter 275 mm

Height from 1,055 to 1,735 mm

Height adjustment one-hand clutch

Leg construction round base

Material rod combination made from aluminum, handle bar

zinc die-cast

Product Category Starline

Rod combination 2-piece folding design

Special features triangular-shaped rods;

knurled screw is impossible to lose;

can be adjusted soundlessly, simply and easily;

significantly lightweight, but nonetheless stable

due to the ingenious round base with an integrated

steel plate with an attractive plastic cover;

circumferential rubber profile reduces undesirable

vibration and footfall noise

Threaded connector 3/8"

Type black

Weight 3.06 kg

The new star in your show!

The avant-garde, one-hand microphone stand is setting new standards in design and function. The elegant combination of

triangular-shaped sections and the new design of the slender one-hand adjustment mechanism go harmoniously with standard

microphone clips and microphones. The integrated knurled screw is impossible to lose and makes tightening and positioning the

microphone clip easy. The stand's simple elegance loses nothing by the addition of König and Meyer's classic swivel arm. The

height of the stand can be adjusted soundlessly, simply and easily using the unique one-hand clutch. The stand is significantly

lightweight, but nonetheless stable due to the ingenious round base with an integrated steel plate with an attractive plastic

cover. The base's circumferential rubber profile reduces undesirable vibration and footfall noise even when the stand is tilted

far over to the side. Damage to flooring (e.g. parquet) is also prevented.

Download PDF